COMICA 094 Vimo S UC 2.4G Dual Channel Mini Wireless Microphone User Manual
- June 13, 2024
- COMICA
Table of Contents
094 Vimo S UC 2.4G Dual Channel Mini Wireless Microphone
User Manual
094 Vimo S UC 2.4G Dual Channel Mini Wireless Microphone
Foreword
Thanks for purchasing Comica 2.4G Dual-channel Mini Wireless Microphone Vimo
S-UC.
Features
- Mini and Lightweight, Unique Magnetic Integrated Microphone
- 48kHz Record, Broadcasting-level Sound Quality
- USB Digital Output, Universal for Computers and Phones
- Stepless Volume Adjustment, One-key Muting and Denoise
- USB-C Charging/Monitoring Port, Support Pass-through Phone Charging
- Support Real-time & Playback Monitor, Mono/Stereo Switch
- Rechargeable Storage Case for Charging, Storing and Power Monitor
- Duration Up to 15 Hours, Support Using While Charging
- Low Latency < 20ms, Working Range Up to 200m(Open Area)
Notice
Due to 2.4G wireless characteristics, please keep face to face when use it,
and don’t turn your back to the receiver, otherwise it is easy to generate
breakpoints, which is a normal phenomenon.
Due to the characteristics of lithium batteries, the transmitter’s charging
indicator will show an inaccurate battery level when the charging starts, and
the actual power may be lower than the indicated power.
If the transmitter runs out of power, it will take more than two hours to get
fully charged.
Some smartphones do not support stereo recording, please switch to mono mode
when connect to these smartphones.
Please pay attention that it can not realize STEREO function when in single-
channel mode.
Please do not expose the product to rain or moisture, and avoid having water
or other liquids spilled on it.
Please do not use or store the product near any heat sources such as
radiators, stoves, or other heat-producing appliances.
This product is a high-precision product, please prevent it from dropping or
colliding.
Packing List
- Transmitter(TX)
- Receiver(RX)
- Charging Case
- Wind Muff
- USB C-USB A Charging Cable
- User Manual
- Warranty Card
Components and Instruction
Transmitter (TX):
-
Internal Mic
-
Working Status Indicator:
Blink blue slowly when unpaired; Blink rapidly when pairing; Show blue when paired; Show green when denoise is on; Show red when muting. -
Belt Clip
-
Mute/Denoise/Pairing Switch Button: Short press for muting; Long press for pairing when unpaired; Long press for denoise when paired.
-
Charging Contacts
Receiver (RX):
-
Charging/Monitoring Port
Monitor the audio recorded by transmitters in real time or charge your phone through this port. It is recommended to use USB-C headphone without DAC chip for better monitoring experience. -
USB-C Plug
-
Transmitter Volume Control Knob: Adjust the volume of transmitter 1/2 synchronously Turn counterclockwise to increase the volume, and turn clockwise to reduce the volume.
-
Transmitter 1/2 Pairing Indicator: Blink blue when unpaired; Show blue when paired.
-
Mode Indicator: Show blue when in mono mode; Indicator is off when in stereo mode.
-
Mono/Stereo Switch Button: Long press to switch Mono/Stereo mode. The default mode is mono mode when the mic turns on.
Charging Case:
-
USB-C Port
-
Battery Level Indicator Button:
Short press to show the battery level of charging case and transmitters. -
Charging Case Battery Level: 0-100
-
Battery Level Indicator of Transmitters:
The left indicators show the battery level of the transmitter placed in the charger well 1; The right indicators show the battery level of the transmitter placed in the charger well 2. There are four power indicator lights, one of which represents 25% of the power. -
Charger Well 1
-
Charger Well 2
-
USB-C Charging Port
-
Restoration Hole
installation and Usage
Pairing (All have been paired at the factory. If you need to re-pair, please
follow the steps below.) Long press the pairing button on the TX to pair. The
indicator lights on the TX and the RX will show blue when the pairing is
successful. 
Usage
- Remove the transmitters and the receiver from the charging case
- Install the transmitter on the collar
Install the transmitter on the collar so that the internal mic points to the sound source - Attach the receiver to the USB-C devices (phones and computers)
- Monitoring/Charging
Connect USB-C headphones to monitor or connect the power bank/DC power using the USB C-USB A charging cable to charge the mobile phone.
Specification
| Wireless Type | 2.4GHz |
|---|---|
| Antenna | Ceramic Antenna |
| Transmitting Power | 10dBm |
| Sensitivity | -32dB±2dB |
| Polar Pattern | Omnidirectional |
| Frequency Response | 80Hz — 20kHz |
| SIN | 70dB SPL(A-weighted, as per IEC651) |
| Equivalent Noise | 24dB SPL(A-weighted, as per IEC651) |
| Maximum SPL | 110dB SPL(@ 1% THD) |
| Dynamic Range | 86dB SPL(A-weighted, as per IEC651) |
| Sound Delay | <20ms |
| Sampling Rate | 48kHz |
| Battery | TX: Built-in Li-ion Battery 95mAh 3.8V |
Charging Case: Built-in Li-ion Battery 800mAh 3.8V
Charging Time| TX:2 Hours Charging Case:2 Hours
Standby Time| TX:5 Hours Charging Case:2 Times for two transmitters and one
receiver charged simultaneously
Net Weight| TX: 10g
RX: 12g
Charging Case: 68g
Dimension| TX: 16x16x5Omm
RX: 12×26.5x63mm
Charging Case: 29×58.5x63mm
Working Temperature| 0 C — 50’C
Storage Temperature| -20 C — 60 C
https://solo.to/comica
Website: comica-audio.com
Facebook: Comical Audio Tech Global
Instagram: Comical Audio
YouTube: Comical Audio
The COMICA LOGO is a trademark which is registered and owned by Commlite
Technology Co.,Ltd
Email: support@comica-audio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>