AMC iAC 120 AMP Power Amplifiers Owner’s Manual
- June 13, 2024
- AMC
Table of Contents
AMC iAC 120 AMP Power Amplifiers
Important Information
Audio amplifiers for 100 V systems. iAC series consists of single-channel and two-channel models. iAC 2X240 can be used as in two-channel 2 x 240 W, or bridged 1 x 480 W mode (100 V output). RS-232 control interface for adjusting device volume, EQ, mute and standby status allows integrating iAC amplifiers into large and complex audio systems that can be automated or controlled remotely. Balanced Phoenix and stereo RCA input with audio link connection for easy installation, multiple voltage output suitable for 4Ω, 70 V, and 100 V speaker lines. Protection circuitry with a signal limiter. ►
Technical Specifications
Technical Specifications| iAC 120| iAC 240| iAC 360|
iAC 2X240
---|---|---|---|---
Output power| 1 x 120 W| 1 x 240 W| 1 x 360 W| 2 x 240 or 1 x 480 W
Power consumption| 184 VA| 340 VA| 475 VA| 560 VA
Stand by power consumption| 10 VA| 10 VA| 10 VA| 20 VA
Power supply|
~ 230 V, 50 Hz
Outputs|
1 x Phoenix power output, 1 x Phoenix audio link
Inputs|
1 x Balanced Phoenix, 1 x Stereo RCA, 1 x Dante input card
Frequency Response|
70 Hz – 20 kHz
THD|
< 0,2 %
S/N ratio|
92 dB
Remote control|
RS-232
Tone control (over RS-232)|
Bass: ±14 dB at 125 Hz, Middle: ±14 dB at 1 kHz, Treble: ±14 dB at 10 kHz
Cooling| Convective air cooling|
Forced air cooling
Dimensions (H x W x D)| 44 x 430 x 245|
88 x 430 x 342
Weight| 5 kg| 8 kg| 9.4 kg| 11.5 kg
AMC” BALTIC Neries kr. 14A, LT-48397, Kaunas, Lithuania/ (370 37) 308585/ www.amcpro.eu
Simple. Reliable. Profitable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>