Flicked Flik Birds and Driver Wave Light User Manual
- June 13, 2024
- Flicked
Table of Contents
Flicked Flik Birds and Driver Wave Light
Product Information
Welcome to Flik, a remote-controlled device for communicating driver feedback in a safe and humorous way. The FLIK replaces dangerous driver communication methods such as brake checking and yelling. It comes with automatic brightness adjustment, easy mounting options, and a toggle switch to change between car and office models.
Specifications:
- Dimension: L172W108H24mm
- Material: PC
- USB-C Input: 5V 0.5A
- USB-A to C Cable: 1.5M
Features:
- Remote-controlled device with a working distance of 10M
- Automatic brightness adjustment for day and night use
- Easily mountable using adhesive Velcro strips
- The hand light attaches to the interior back window, while the remote attaches safely to the dashboard or keychain
- First-time pairing: Hold the remote for 3 seconds after installing the battery
- Battery-powered device (3-AA batteries required) with a remote that has a built-in CR2032 battery
- Charging port is only for chargeable battery
Note: The device complies with part 15 of the FCC Rules and meets general RF exposure requirements. It can be used in portableexposure conditions without restriction. Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.
Product Usage Instructions
- Mounting:
- Attach the FLIK hand light to the interior back window using the included adhesive Velcro strips.
- Securely attach the remote to the dashboard or keychain using the adhesive Velcro strips.
- Pairing:
- For first-time use, hold the remote for 3 seconds after installing the battery to pair it with the device.
- Battery Installation:
- Insert 3-AA batteries into the device to power it up.
- The remote has a built-in CR2032 battery.
- Charging:
- The charging port is only for a chargeable battery, not applicable for this device.
- Model Selection:
- To switch between car and office models, toggle the switch on the device.
For any further assistance or technical help, please consult the dealer or an experienced radio/TV technician.
Overview
Welcome to Flik.
Give The Bird & Wave to Drivers
Specifications
- Dimension: L172W108H24mm
- Material: PC
- USB-C Input: 5V 0.5A
- USB-A to C Cable: 1.5M
- 【REMOTE CONTROLLED】: With the click of a button, you can communicate driver feedback in a safe and hilarious way. The FLIK replaces dangerous driver communication like brake checking, yelling, etc.., working distance 10M
- 【AUTOMATIC BRIGHTNESS ADJUSTMENT】: The FLIK light automatically adjusts to be bright during the day and dim at night!
- 【EASY MOUNTING】: Easily and securely mount the FLIK and its remote with the included adhesive Velcro strips. The hand light attaches to the interior back window while the remote attaches safely to the dashboard or to you keychain..
- 【PAIRING】: 1st time use, hold remote 3s after install battery
- 【BATTERY】: 3-AA batteries are needed to power up this device , remote with built in battery, CR2032
- 【CHARGING】: Charging port only charges chargeable battery
- 【MODEL】: toggle the switch to change between car and office model
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.