HUSKY 5061 X-Act Contour Floor Liners Instruction Manual
- June 13, 2024
- Husky
Table of Contents
HUSKY 5061 X-Act Contour Floor Liners
X-ACT CONTOUR® FLOOR LINERS
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Husky Liners.
Your new second seat liner is custom molded to fit your vehicle. The liner is
made to take the place of your factory floor mat(s). For correct fit, it is
necessary to remove the factory floor mats before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely
tough and durable. The easiest way to clean your liner is with a damp cloth or
sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®,
Son-of-a-Gun® or similar items is discouraged as these products make the liner
slick.
INSTALLATION INSTRUCTIONS FOR YOUR WEATHERBEATER SECOND SEAT FLOOR LINER
TO INSTALL YOUR SECOND SEAT LINER, FIRST MOVE YOUR FRONT ROW SEATS COMPLETELY FORWARD. THEN, INSTALL YOUR NEW LINER, POSITIONING IT IN THE VEHICLE AS SHOWN ABOVE. LASTLY, REPOSITION YOUR FRONT ROW SEATS AS DESIRED.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>