BOYO VTM96M 9.6 Inch Full Display Mirror Monitor

Product Information

• Product Name: VTM96M 9.6 Inch Full Display Mirror Monitor
• Display: 9.6-inch MIPI with a resolution of 1280×320
• Brightness / Contrast: 600 cdm / 400:1

• of Camera Inputs: 2 (AHD1 and AHD2)

• Video Format: CVBS, 720P, 1080P supported
• Display Trigger: 1 (Reverse AHD2 Trigger)
• Operating Voltage: DC10 ~ 24V, Cam output: DC12V
• Mounting Options: Strap-on (Rubber Fastener) or Replacement mount (A1 types)
• Operating Temperature: Not specified

Product Usage Instructions

1. Make sure the monitor is not wet and avoid using chemical cleaning products on it.
2. Do not watch videos while driving.
3. Before driving, adjust the rear camera properly for better images.
4. Ensure you are using 1080P or 720P HD cameras for optimal image quality.
5. Check the content of the box before proceeding.
6. Wiring: Connect the cameras to the corresponding camera inputs (AHD1 and AHD2).
7. Camera Views:
   • Standard View: AHD1 and AHD2 (Rear View) – Full display of the camera image with a resolution of 1280×320.
   • Reverse View: In the reverse mode, only the lower part of the camera image is shown to suit reversing operation. The resolution is 1280×320.
8. Operation: On/Off Button
   • Located at the bottom centre of the mirror.
   • The button is operational when one or more cameras are connected.
   • Short button press: Momentary press.
   • Long button press (2 seconds): Access the settings menu.
   • Settings Menu: Brightness, Contrast, Saturation, Tint, Guideline, Reset. Use repeated long presses to cycle through these settings.
   • Within each setting, use repeated short presses to change the setting value.
   • Repeated short presses cycle through Monitor on AHD1 display, AHD2 display. If it starts on AHD2, the cycle will be AHD2 Display, AHD1 display, Monitor off.

For technical support, call 888-941-3060 or email [email protected]. Visit their website at www.VisionTechAmerica.com. The company’s address is Vision Tech America, Inc., 1452 E. Valencia Dr., Fullerton, CA 92831.

• Long press to access the settings menu. Once in the settings menu:
• Repeated long presses cycle through:
• Brightness Contrast Saturation Tint Guideline Reset
• Within each setting, repeated short presses will change the setting value.

Specification

Display| 9.6-inch MIPI
Brightness / Contrast| 600 cdm / 400:1
Display Resolution| 1280×320

of Camera Inputs| 2 (AHD1 and AHD2)

Video Format| CVBS, 720P, 1080P supported
Display Trigger| 1 (Reverse AHD2 Trigger)
Display Views| AHD1 / AHD2 (Rear View): Standard display

AHD2 (Reverse View): In the reverse mode the portion of the camera image shown is the low part to suit reversing operation. (Reverse trigger)

Current| 350mA (Working), 89mA (Standby)
Operating Voltage| DC10 ~ 24V, Cam output: DC12V
Mounting| Strap-on: Rubber Fastener Replacement mount: A1 types
Operating Temp.| -13ºF ~ 158ºF

9.6 Inch Full Display Mirror Monitor With Dual Mounting Options

WARNING

• Do not get the monitor wet.
• Do not use chemical cleaning products.
• Do not watch videos while driving.
• Adjust the rear camera properly before driving.
• For better images, please use 1080P or 720P HD cameras.

In the box

Please check the content before proceeding

Wiring

Camera Views

Camera Display
To retain the correct image proportion only a section of the full vertical camera image is displayed, please adjust the camera position accordingly.

Standard View
AHD1 and AHD2 (Rear View)

Reverse View
In the reverse mode, the portion of the camera image shown is the low part to suit the reversing operation.

REVERSE TRIGGER

Operation: On / Off Button

• The button is located at the bottom centre of the mirror.
• The button will be operational only when one or more cameras are connected.
• The button is operated by
  • short button press: momentary press
  • Long button press: 2-second press
• Repeated short presses cycle through:
• Monitor on AHD1 display AHD2 display Monitor off.
• If starts on AHD2, this will be:
• AHD2 Display The AHD1 display Monitor off

CONTACT

• For technical support call: 888-941-3060
• Email: [email protected].
• Visit: www.VisionTechAmerica.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>