HUSKY 25291 Weather Beater Floor Liners Instruction Manual
- June 13, 2024
- Husky
Table of Contents
HUSKY 25291 Weather Beater Floor Liners
Product Information: Weatherbeater Floor Liners
The Weatherbeater Floor Liners, PT #25291, are designed to provide maximum protection for your vehicle’s interior floor. These liners are custom-fit and specifically engineered to fit the contours of your vehicle’s floor, ensuring complete coverage and superior protection against dirt, spills, and other everyday wear and tear. These floor liners are made from a durable and high- quality rubberized thermoplastic material that is resistant to cracking, warping, and fading. They feature a raised lip design that helps to contain spills and prevent them from reaching the vehicle’s carpet. The liners also have a non-slip surface to keep your feet secure while driving. The Weatherbeater Floor Liners come in a set of two smaller liners. These smaller liners are designed to fit into the two lower-level areas located behind each wheel well of the vehicle. However, please note that certain vehicle trim levels may have only one lower level area. For additional information about the Husky Liner Lifetime Warranty, please visit www.huskyliners.com/lifetime- warranty.
Product Usage Instructions
- Before installation, ensure that the vehicle’s interior floor is clean and free from any debris.
- Start by placing one of the smaller liners into the lower-level area behind the wheel well on the driver’s side of the vehicle. Ensure that the liner fits snugly and covers the entire area.
- Repeat step 2 for the other smaller liner on the passenger’s side of the vehicle.
- If your vehicle has an additional lower-level area behind the wheel well on the driver’s side, place the second smaller liner in that area.
- Adjust the liners as necessary to ensure a proper fit and complete coverage of the lower-level areas.
- Make sure the liners are securely in place and do not interfere with the operation of the vehicle’s pedals or other controls.
- Regularly remove the liners for cleaning and maintenance. Simply lift them out of the vehicle, empty any collected debris, and clean them with a mild soap and water solution. Allow them to air dry before reinstalling.
Note: These usage instructions are general guidelines. Please refer to the specific installation instructions provided in the “2529 cargo Installation Instruction.doc” document for detailed installation steps and any additional information specific to your vehicle model.
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater™ Cargo Liner from Husky Liners. Your
new cargo liner is custom molded to fit your vehicle. Upon removal from the
box your liner will not completely unroll and lay flat. This is
normal and only temporary. Just place the liner on the floor or in the cargo
area of your vehicle with a weight in each corner (a book works well). After
about 15 minutes, your liner will remain flat. In colder climates this
“relaxing” may take longer; moving the liner to a heated area and letting it
lay face-down in a flat position will speed the process. Your liner is
manufactured using an engineering resin that is lightweight and extremely
tough and durable. The easiest way to clean your liner is with a damp cloth or
sponge. If using a cleaner, 409® or Glass Plus® work well. Do not use Armor
All®, Son-of-a-Gun® or similar items as these products make the liner slick.
THE TWO SMALLER LINERS WILL FIT INTO THE TWO LOWER-LEVEL AREAS LOCATED BEHIND EACH WHEEL WELL OF THE VEHICLE. CERTAIN VEHICLE TRIM LEVELS WILL ONLY HAVE ONE LOWER LEVEL AREA
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty