Camden CM-120i keypad Shop And Lock Security Installation Guide

: June 13, 2024
: Camden

Camden CM-120i keypad Shop And Lock Security

Product Information

The product is a keypad and faceplate assembly designed for access control systems. It is available in two models: CM-120i and CM-120wV2. The product operates on 12 or 24 Volts AC/DC power and has a standby current draw of 30 mA, with a maximum current draw of 90 mA. The keypad can store up to 999 user codes, with each code being up to 8 digits long. The response time of the keypad is 0.3 seconds. It has various inputs including 1 x REX input, 1 x Door Contact Input, and 2 x Form C (SPDT) inputs. The product also features relay outputs with a contact rating of 3 amps at 24 VDC/120 VAC. It supports Wiegand output and has an optional RF output. The time delay for the relay output can be set from 1 to 255 seconds or latched.

Product Usage Instructions

Package Contents:
- 1 Keypad and faceplate assembly
- 1 Foam gasket (CM-120W only)
- 1 Lock Varistor (MOV)
- 2 #6-32 x 1 S/S Phillips Screws
- 2 #6-32 x 1 Tamperproof screws
- 1 Tamperproof Screwdriver
Mounting:

Follow the instructions provided in the manual for proper installation and mounting of the keypad and faceplate assembly.

Power Connection:

Connect the keypad to a 12 or 24 VAC/DC power source using the appropriate wiring. Refer to the manual for detailed instructions on power connection.

User Code Programming:
Enter Programming Mode:

  * Press and release the keypad keys simultaneously.
  * The keypad LEDs will start flashing.
  * The keypad will emit a low to high beep sound.
2.  **Add/Change User:**
  * Select a memory address for the user.
  * Enter the desired user code using the keypad.
3.  **Delete User:**
  * Select the memory address of the user to be deleted.
  * Follow the instructions in the manual to delete the user.
4.  **Exit Programming Mode:**
  * Enter the exit code specified in the manual.
  * All LEDs will turn off, indicating that the keypad is in standby mode.

Additional Functions:

Refer to the manual for detailed instructions on how to perform additional functions such as setting the enter key, setting code length, enabling anti- tailgating, controlling the backlight, and configuring relay output modes.

Package Contains

1	Keypad and faceplate assembly
1	Foam gasket (CM-120W only)
1	Lock Varistor (MOV)
2	#6-32 x 1” S/S Phillips Screws
2	#6-32 x 1” Tamperproof screws
1	Tamperproof Screwdriver

Specifications

Models		CM-120i / CM-120wV2
Illumination		CM-120i: No, CM-120wV2: Yes
Size		2 ¾” x 4 ½” x ¾”

(69.85mm x 114.30mm x 19.05mm)

(10 million possible codes)

Response Time| | 0.3 seconds
Inputs| | 1 x REX input

1 x Door Contact Input

Relay Output| | 2 x Form C (SPDT)
Relay Contact Rating| | 3 amps @ 24 VDC/120 VAC
Wiegand Output| | 26-bit raw (opt. Facility code)
RF Output| | 2-channel w/ optional TX-99
Time Delay| | 1 to 255 seconds, or Latched
Name| Memory Address| User Code| Name| Memory Address| User Code
---|---|---|---|---|---
Master User| 1| 1234| | 36|
Manager| 2| | | 37|
User #1| 3| | | 38|
User #2| 4| | | 39|
Etc…| 5| | | 40|
| 6| | | 41|
| 7| | | 42|
| 8| | | 43|
| 9| | | 44|
| 10| | | 45|
| 11| | | 46|
| 12| | | 47|
| 13| | | 48|
| 14| | | 49|
| 15| | | 50|
| 16| | | 51|
| 17| | | 52|
| 18| | | 53|
| 19| | | 54|
| 20| | | 55|
| 21| | | 56|
| 22| | | 57|
| 23| | | 58|
| 24| | | 59|
| 25| | | 60|
| 26| | | 61|
| 27| | | 62|
| 28| | | 63|
| 29| | | 64|
| 30| | | 65|
| 31| | | 66|
| 32| | | 67|
| 33| | | 68|
| 34| | | 69|
| 35| | | 70|

Connections

Camden-CM-120i-keypad-Shop-And-Lock-Security-
fig-1

NOTE: Optional equipment is shown as dotted lines

Legend

Camden-CM-120i-keypad-Shop-And-Lock-Security-
fig-2

User Functions

Camden-CM-120i-keypad-Shop-And-Lock-Security-
fig-3

NOTE: Master code is in Position #1 can be changed-not deleted

Programming Mode

NOTE: You must enter Programming Mode before any other programming can take place.

Exit Programming

NOTE: After exiting programming mode, all LED’s are OFF and the keypad is in standby mode.

Memory Reset

Camden-CM-120i-keypad-Shop-And-Lock-Security-
fig-6

Admin Functions

Camden-CM-120i-keypad-Shop-And-Lock-Security-
fig-7

Annunciation Control Functions

Camden-CM-120i-keypad-Shop-And-Lock-
Security-fig-8

Time Delay/Duration Functions

Camden-CM-120i-keypad-Shop-And-Lock-
Security-fig-9

NOTE: Relay output mode must be set to Split or Sequenced for Relay 2 operate duration and delay on operate functions to work. Operate and Delay times are in seconds.