HONDA GL1800-D-DA Silver Rear Carrier Instruction Manual
- June 13, 2024
- Honda
Table of Contents
HONDA GL1800-D-DA Silver Rear Carrier
Product Information
- Product Name: Rear Carrier
- Part Number: 08L72-MKC-A10
- Compatible Models: GL1800/D/DA, GL1800B/BD
- Publication No.: MII 16426
- Issue Date: January 2018
- Maximum Loading Capacity: 6.6 lb (3.0 kg)
Product Usage Instructions
- Remove the right and left rear top lid.
- Attach the label with the dimensions provided.
- Install the grommets.
- Install the right and left cover.
- Install the collars.
- Install the rear carrier.
- Install the carrier covers.
- Cut the carrier covers to the specified dimensions.
Tools and Supplies Required
- Hex wrench (6 mm)
- Ruler
- Scissors
- Isopropyl alcohol
- Shop towel
- Torque wrench
Note: Please refer to the Service Manual for the torque values of the removed parts.
Honda Dealer:
Please give a copy of these instructions to your customer.
Accessory
- REAR CARRIER
- P/N 08L72-MKC-A10
Application
- GL1800/D/DA
- GL1800B/BD
PARTS LIST
| No. | Description | Qty |
|---|---|---|
| (1) | Installation Instructions URL | 1 |
| (2) | Rear carrier | 1 |
| (3) | Carrier cover | 2 |
| (4) | Collar (short) | 2 |
| (5) | Collar (long) | 2 |
| (6) | Right cover | 1 |
| (7) | Left cover | 1 |
| (8) | Label | 1 |
| (9) | Washer | 4 |
| (10) | 8 mm socket bolt (short) | 2 |
| (11) | 8 mm socket bolt (long) | 2 |
| (12) | Grommet | 4 |
| (13) | Flange collar | 4 |
TOOLS AND SUPPLIES REQUIRED
- Hex wrench (6 mm)
- Ruler
- Scissors
- Isopropyl alcohol
- Shop towel
- Torque wrench
TORQUE CHART
Tighten all screws, bolts, and nuts to their specified torque values. Refer to the Service Manual for the torque values of the removed parts.
| Item | N·m | kgf·m | Ibf·ft |
|---|---|---|---|
| 8 mm socket bolt | 22 | 2.2 | 16 |
MAXIMUM LOADING CAPACITY
The weight of the cargo must not exceed the following maximum loading capacity:
Maximum Loading Capacity
Rear carrier| 6.6 lb (3.0 kg)
INSTALLATION
NOTE:
- Heat the bonding surfaces with a hair dryer if the ambient air temperature is below 70°F (21°C).
- The adhesive reaches full strength in 72 hours. Wait at least 24 hours before riding your motorcycle.
- Remove the right and left rear top lid as shown.
- Attach the label as shown.
- Install the grommets as shown.
- Install the flange collars as shown.
- Install the right and left cover as shown.
- Install the collars as shown.
- Install the rear carrier as shown.
- Cut the carrier covers to the dimensions shown.
- Install the carrier covers as shown.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>