HONDA 08R73-MKC-A01 Lower Air Deflector Instruction Manual
- May 15, 2024
- Honda
Table of Contents
HONDA 08R73-MKC-A01 Lower Air Deflector
Product Information
Specifications
- Product Name: Lower Air Deflector
- Part Number: 08R73-MKC-A01
- Application: GL1800/D/DA GL1800B/BD
- Issue Date: January 2018
Product Usage Instructions
Parts List
| No. | Description | Qty |
|---|---|---|
| 1 | Installation instructions URL | 1 |
Tools and Supplies Required
- Hex wrench (5 mm)
- Electric drill
- Drill bit (3 and 9.5 mm)
- Torque wrench
Torque Chart
Tighten all screws, bolts, and nuts to their specified torque values. Refer to the Service Manual for the torque values of the removed parts.
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter difficulties during installation?
A: If you encounter difficulties during installation, please refer to the
installation instructions URL provided or contact your local Honda dealer for
assistance.
Accessory
LOWER AIR DEFLECTOR P/N 08R73-MKC-A01
Application
- GL1800/D/DA
- GL1800B/BD
Publication No.
MII 16426
Issue Date
January 2018
Honda Dealer:
Please give a copy of these instructions to your customer.
PARTS LIST
| No. | Description | Qty |
|---|---|---|
| (1) | Installation instructions URL | 1 |
| (2) | Right air deflector B | 1 |
| (3) | Left air deflector B | 1 |
| (4) | 5 mm screw | 6 |
| (5) | Well nut | 6 |
| (6) | Washer (White) | 6 |
| (7) | Washer (Black) | 6 |
| (8) | Cushion | 6 |
TOOLS AND SUPPLIES REQUIRED
Hex wrench (5 mm) Electric drill Drill bit (3 and 9.5 mm) Torque wrench
TORQUE CHART
Tighten all screws, bolts, and nuts to their specified torque values. Refer to
the Service Manual for the torque values of the removed parts.
| Item | N·m | kgf·m | Ibf·ft |
|---|---|---|---|
| 5 mm screw | 0.4 | 0.04 | 0.3 |
INSTALLATION
CAUTION
To prevent burns, allow the engine, exhaust system, radiator, etc., to cool
before installing the accessory.
- Remove the left deflector panel as shown.
- Drill at the marked points of left deflector panel as shown.
- Remove any burrs from the edge of the hole.
- Drill at the marked lines of the left deflector panel as shown.
- Drill holes at the center of the marked lines.
- Remove any burrs from the edge of the hole.
- Install the cushions as shown.
- Install the left deflector panel in the reverse order of removal.
- Install the well nuts as shown.
- Install the left air deflector B as shown.
- Install the right air deflector B in the same manner as the left side.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>