APC PZ42I-GR Power Distribution Unit (PDU) User Guide
- June 13, 2024
- APC
Table of Contents
APC PZ42I-GR Power Distribution Unit (PDU)
Safety and General Information
Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- Do not install this device during a lightning storm.
- For indoor use only.
- Do not install the UPS power strip in a hot or excessively moist location; do not use with aquarium equipment.
- A maximum of two UPS power strips can be installed per UPS. Only one can be used with each bank of battery backup and surge outlets.
- If a UPS does not have Surge Only outlets then only one UPS power strip is allowed.
Failure to follow these instructions will result in death or serious injury.
Installation
- Plug the power strip into the back of a UPS with IEC C13 outlets. A maximum of one UPS power strip is allowed per UPS for the battery backup outlets and a second is allowed for the surge-only outlets if available.
- Plug the power cord from your computer and/or other electrical equipment into the UPS IEC Power Strip.
- For PZ42I-GR, make sure the IEC locking nut is released before inserting into the UPS. Rotate the green nut counter-clockwise as far as possible. Engage the power strip by inserting the plug into the UPS and pushing it toward the UPS while turning the green nut. Keep turning the green nut until there is resistance and tighten another 1/4 to 1/2 turn. Visually inspect the plug to ensure proper connection.
- Do not use the Power Strip with a UPS that has a Maximum Line Current less than that of the Power Strip.
Circuit Breaker
When an output overload condition occurs, the power automatically turns off, disconnecting all equipment from the UPS. Unplug all connected equipment, then press the power switch to reset the power strip. Then re-plug all equipment.
- Power Switch / Circuit Breaker
- IEC C14 Plug
- UPS IEC C13 Outlet
- IEC Locking Nut
Specifications
- Input Voltage: 250V max.
- Connector: IEC C14
- Input Frequency: 50/60 Hz + 5Hz
- Maximum Line: Current per phase 10A
- Cord Length: 1.5 meters (4.11 ft.)
- Dimensions (WxDxH): 285 x 44.68 x 40 mm (11.22 x 1.76 x 1.57 in)
Limited Warranty
SEIT warrants its products to be free from defects in materials and workmanship under normal use and service by the original owner for 5 years. The SEIT obligation under this warranty is limited to repairing or replacing, at its sole option, any such defective products. To obtain service under warranty you must obtain a Returned Material Authorization (RMA) number from SEIT or a SEIT Service Center with transportation charges prepaid and must be accompanied by a brief description of the problem and proof of date and place of purchase. This warranty applies only to the original purchaser. More details can be found by visiting www.apc.com.
APC by Schneider Electric IT Customer Support Worldwide
For country-specific customer support, go to the APC by Schneider Electric Web
site, www.apc.com.
Trademarks
© 2017 APC by Schneider Electric. APC and the APC logo are owned by Schneider Electric Industries S.A.S., or their affiliated companies. All other trademarks are the property of their respective owners.
FAQs
What is the APC PZ42I-GR Power Distribution Unit (PDU)?
The APC PZ42I-GR is a Power Distribution Unit designed to distribute power to multiple devices and provide surge protection for connected equipment.
How many outlets does the PZ42I-GR PDU have?
The PZ42I-GR PDU typically features 4 AC outlets, allowing you to connect multiple devices to a single power source.
What is the maximum power capacity of this PDU?
The PZ42I-GR PDU typically has a maximum power capacity of 2300 watts, providing sufficient power for connected devices.
Does the PDU provide surge protection for connected equipment?
Yes, the PZ42I-GR PDU often includes surge protection to safeguard connected devices against power surges and voltage spikes.
Is this PDU suitable for home or office use?
The PZ42I-GR PDU is suitable for both home and office environments, providing reliable power distribution and protection.
Can I mount this PDU on a rack or wall?
Yes, the PZ42I-GR PDU is designed for rack-mounting and can be installed in a standard 19-inch rack. It may also support wall-mounting options for flexibility.
What is the cord length of the PDU?
The PZ42I-GR PDU typically comes with a 4.11 foot power cord, offering flexibility in connecting to power sources.
Can I remotely manage this PDU?
Some models of the PZ42I-GR PDU support remote management capabilities, allowing you to monitor and control power distribution remotely.
Does the PDU have a built-in display or indicator lights?
The PDU may have indicator lights or a built-in display to provide information about power status and load.
What is the warranty period for the APC PZ42I-GR PDU?
The APC PZ42I-GR Power Distribution Unit (PDU) typically comes with a warranty of 5 years from the date of purchase.
Is there a specific configuration or setup required for this PDU?
The PZ42I-GR PDU is typically a plug-and-play device and does not require extensive configuration. Simply connect your devices, and it will start distributing power.
Is this PDU suitable for international use?
The PDU's compatibility for international use may depend on the specific model. Some models support multiple voltage and plug configurations, while others are designed for use in specific regions.
References:APC PZ42I-GR Power Distribution Unit (PDU) – Device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>