Prestel SW-H41A 4K 60 HDMI Switcher 4×1 User Manual
- June 13, 2024
- Prestel
Table of Contents
Prestel SW-H41A 4K 60 HDMI Switcher 4×1
Prestel SW-H41A User Manual
Introduction
This is a high performance HDMI 4×1 switcher that supports HDTV formats up to 4Kx2K@60Hz and all HDMI 3D TV formats. It can extract HDMI stream audio to separate digital and analog audio output. This product supports HDCP repeater/CEC/ARC functions. Select any of the inputs by front panel button or IR Remote, the corresponding indicator LED on the front panel will be illuminated.
Package
| 1 x HDMI 4×1 Switcher | 1 x 5V/1A Power Adapter |
|---|---|
| 1 x 38KHz IR Rx cable | 1 x Optical convert header (for SPDIF audio output) |
| 1 x HDMI 4×1 IR Remote | 1 x Operation Manual |
Features
- Compliant with HDMI 2.0a, DVI 1.0 standards.
- HDCP 2.2 and HDCP 1.4 compliant.
- Video formats up to 4Kx2K@60 and all HDMI 3D video formats.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH Digital and analog audio output.
- Support smart EDID management(Auto/2CH/5.1CH/7.1CH selectable).
- Support input port auto switching or manual switching mode.
- Audio Return Channel (ARC) supports.
Specifications
Frequency Bandwidth| Input Ports| Output Port| HDMI Audio Output| ESD
Protection| Dimensions (mm)| Weight (g)| Power Consumption| Operating
Temperature| Storage Temperature
---|---|---|---|---|---|---|---|---|---
| HDMI output port, connect with HDTV or monitor by HDMI
cable| HDMI input ports, connect with DVD, PS4 or Set-top Box by HDMI
cable| Audio output (including L/R analog and optical audio out)| RS232 port|
IR receiver port| DC 5V input port
Switcher Operation controls and Functions
Front Panel:
- Input indicator LED, corresponding port LED will be illuminated when its port be selected.
- Auto or manual select button: Press this button >2 seconds to select auto switching or manual switching mode. Under manual switching mode, short pressing this button to select input port.
- EDID status LED (Auto means using TV EDID).
- EDID select button (Press this button to select EDID mode Auto/2CH/5.1CH/7.1CH).
- ARC status LED (this LED will be illuminated if ARC is enabled successfully).
- ARC function on/off button.
Rear Panel:
- HDMI output port, connect with HDTV or monitor by HDMI cable.
- HDMI input ports, connect with DVD, PS4 or Set-top Box by HDMI cable.
- Audio output (including L/R analog and optical audio out).
- RS232 port.
- IR receiver port.
- DC 5V input port.
IR Remote
Press the buttons on the remote to perform the following functions:
- Press this button to enable or disable ARC function. ARC LED on front panel will be illuminated if ARC function is enabled successfully.
- Press these buttons to select different EDID setting and corresponding LED on front panel will be illuminated.
- Press this button to select auto switching or manual switching mode. Under manual switching mode, press this button to select input port.
Application Example
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions c arefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
Introduction
This is a high performance HDMI 4×1 switcher that supports HDTV formats up to 4Kx2K@60Hz and all HDMI 3D TV formats. It can extract HDMI stream audio to separate digital and analog audio output. This product supports HDCP repeater/CEC/ARC functions. Select any of the inputs by front panel button or IR Remote, the corresponding indicator LED on the front panel will be illuminated.
Package
- 1 x HDMI 4×1 Switcher
- 1 x 5V/1A Power Adapter
- 1 x 38KHz IR Rx cable
- 1 x Optical convert header (for SPDIF audio output)
- 1 x HDMI 4×1 IR Remote
- 1 x Operation Manual
Features
- Compliant with HDMI 2.0a, DVI 1.0 standards.
- HDCP 2.2 and HDCP 1.4 compliant.
- Video formats up to 4Kx2K@60 and all HDMI 3D video formats.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH
- Digital and analog audio output
- Support smart EDID management(Auto/2CH/5.1CH/7.1CH selectable)
- Support input port auto switching or manual switching mode
- Audio Return Channel (ARC) supports
Specification
- Frequency Bandwidth: 18Gbps
- Input Ports: 4 HDMI Female ports, 1 IR Receive port and 1 RS232 port
- Output port: 1 HDMI Female port and 1 L/R & Optical port
- HDMI Audio Output: P C M 2 . 1 / 5 . 1 / 7 . 1 C H , D o l by 5 . 1 , DT S 5 . 1 , Dolby-TrueHD, DTS-HD
- ESD Protection: Human Body Model: ± 8kV (air-gap discharge) ± 4kV (contact discharge)
- Dimensions (mm): 180 (D) x 85 (W) x 11.6 (H)
- Weight (g): 300
- Power Consumption: Max 2.5W
- Operating Temperature: 0˚C ~ 40˚C / 32˚F ~ 104˚F
- Storage Temperature: -20˚C ~ 60˚C / -4˚F ~ 140˚F
Switcher Operation controls and Functions
Front Panel
-
Input indicator LED, corresponding port LED will be illuminated when its port be selected.
-
Auto or manual select button:
Press this button >2 seconds to select auto switching or manual switching mode.
Under manual switching mode, short pressing this button to select input port. -
EDID status LED (Auto means using TV EDID).
-
EDID select button (Press this button to select EDID mode Auto/2CH/5.1CH/7.1CH)
-
ARC status LED (this LED will be illuminated if ARC is enabled successfully)
-
ARC function on/off button
Rear Panel
- HDMI output port, connect with HDTV or monitor by HDMI cable
- HDMI input ports, connect with DVD, PS4 or Set-top Box by HDMI cable
- Audio output (including L/R analog and optical audio out)
- RS232 port
- IR receiver port
- DC 5V input port
IR Remote
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>