electroair EA-15000 Ignition Switch Panels Instruction Manual

June 9, 2024
electroair

EA-15000 Ignition Switch Panels
Instruction Manual

EA-15000 Ignition Switch Panels

EA-15000 Instructions for Continued
Airworthiness
Electroair 327 Catrell Dr Howell, MI 48843 U.S.A.
Ph: 517-552-9390
Fax: 517-552-9391
Email: sales@electroair.net

General:

This Instruction for Continued Airworthiness contains the necessary information required for the operation of an Ignition/Starter Switch Panel For Two Magnetos (EA-15000) as installed on aircraft that formerly used a rotary style ignition switch.
A. FUNCTIONAL OVERVIEW
The Electroair EA-15000 is an Ignition/Starter Switch Panel for use on aircraft with two magnetos. The EA-15000 eliminates the need for the rotary key switch by replacing it with two rocker switches and one push button starter switch.
B. SYSTEM OPERATION
Under normal operating conditions, the EA-15000 controlled by the flight crew. An AFMS has been created to reflect how the EA-15000 Ignition/Starter switch panel operates instead of a rotary key switch.

Precautionary Statements:

  • Read this entire document before starting any processes listed within this document. If there are any questions or concerns please contact Electroair before starting. (517-552-9390 or sales@electroair.net)
  • If a switch panel is improperly installed; the EIS, the aircraft, or the installer could be seriously damaged.
  • Always use appropriate work and safety practices.
  • For the latest up to date information refer to www.electroair.net (ICA, AML, Installation Manual, AFMS, etc.)
  • For abnormal operation, for ignition systems that have a suspected failure, refer to the Electroair Trouble Shooting Instructions at http://electroair.net/pdfs/troubleshooting_the_EIS.pdf

Eligibility:

See approved model list (AML) for exact model numbers

Manual Reference:

Electroair Kit Part Number Installation Manual Number
EA-15000 IM EA-15000

Airworthiness Limitations Section (ALS):

The Airworthiness Limitations section is FAA approved and specifies maintenance required under §§43.16 and 91.403 of Title 14 of the Code of Federal Regulations unless an alternative program has been FAA approved. There are no FAA mandated inspection or replacement intervals for this STC.
Receiving and Acceptance Checking of EIS Kit

  1. Review the packaging before acceptance from the freight carrier. If the packaging is damaged, refuse the shipment.

  2. Open the package; and, review the contents of the package to the content listing on the package.

  3. Are all of the materials there?
    a. Yes, proceed to step 4.
    b. No, contact the factory. Have the serial number of the kit available when contacting. (517-552-9390 or sales@electroair.com)

  4. Review the EA-15000 ignition/starter switch panel.

  5. Are all materials acceptable?
    a. Yes, proceed with installation.
    b. No, contact the factory. Have the serial number of the kit available when contacting. (517-552-9390 or sales@electroair.com)

If possible, store parts in original packaging when not in use. If not possible, wrap parts in cushioning material and place in one location. Review as above prior to reinstallation.

Inspections:

Refer to the installation manual for required tooling. The installation manual has been provided as a part of this kit, if another copy is required refer to www.electroair.net.
Annually: 1. N/A
Lightning Strikes, Engine Fires, Water Damage, Etc.

  1. Inspect the EA-15000 wiring and components.
  2. If there is obvious damage, replace the damaged components.
  3. If there is no obvious damage, perform a ground run-up. If no problems are found, continue with the standard procedures as stated in the AFMS.
  4. If unsure, contact factory (517-552-9390 or sales@electroair.net).

Re-Installation:

  1. For removal follow the EA-15000 Installation Manual in reverse order.

  2. For instructions on reinstalling individual EA-15000 components or the entire system, refer to the EA-15000 Installation Manual that was included with the EA-
    15000 kit. If the original installation manual is not with the system, contact the factory for an up to date replacement installation manual (517-552-9390 or
    sales@electroair.net) or retrieve from the factory’s website www.electroair.net.

  3. After re-installation follow the instructions for start-up in the AFMS.

Glossary and Abbreviations:

  • AD(s) ­ airworthiness directive(s)
  • AFM ­ aircraft flight manual
  • AFMS ­ aircraft flight manual supplement
  • ALS ­ aircraft limitations section
  • AML ­ approved model list
  • BTDC ­ before top dead center
  • CFR ­ code of federal regulations
  • CSTW ­ crankshaft trigger wheel
  • EIS ­ electronic ignition system
  • FAA ­ federal aviation administration
  • MAG — magneto
  • MAP ­ manifold absolute pressure
  • May/Should ­ an optional requirement
  • MTH ­ mag timing housing
  • Must/Shall ­ a mandatory requirement
  • RPM ­ revolutions per minute
  • STC ­ supplemental type certificate
  • TDC ­ top dead center

Revision Log

Revision|  Date of Revision| Description of Revision| Approved by|  Date of Approval
---|---|---|---|---
00| 09/15/2017| Initial Release| |
| | | |

Electroair Acquisition Corp. Revision 00
ICA EA-15000 Prepared by: EAC

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals