RacingLine VWR031000 Power Delivery Module User Guide

June 17, 2024
RacingLine

RacingLine VWR031000 Power Delivery Module

Product Information

Specifications

  • Product Name: RacingLine PDM (Power Delivery Module)
  • Compatibility: Windows 10/11 PC
  • Features: ECU and TCU tuning, performance software suite access, various tuning stages, fuel options

FAQ

  • Q: Can I use the RacingLine PDM on a Mac computer?
  • A: No, the RacingLine PDM is compatible with Windows 10/11 PCs only.
  • Q: Is it necessary to connect the battery charger while flashing?
  • A: Yes, it is essential to maintain a +12v charge on the vehicle’s battery during the flashing process to prevent any interruptions.

Welcome to RacingLine PDM: Power Delivery Module.
Below is the user guide to get you ready to flash your vehicle’s ECU and/or TCU using our new PDM tool to unlock a whole new level of performance!
It’s a simple process, but please take time to read this guide carefully before starting – as any errors with your hardware, internet connection or usage of the PDM system could cause problems with your vehicle.

Introduction

  • The RacingLine PDM Tuning Portal allows you to access your performance software suite, ranging from stock to Stage 1, 1+, 2 and 3 (where available), TCU transmission tuning and different fuel options with our simple-to-use flashing process.
  • The PDM portal allows you to upload both ECU and TCU tuning to your vehicle yourself without the need to visit one of our RacingLine-approved Software dealers.
  • As RacingLine offers free upgrades for the registered vehicle, the portal will allow you to upgrade from Stages 1 through 3, subject to installation of the required supporting hardware or fuel types, and to return to stock at any time.
  • It is your responsibility to verify that the appropriate level of vehicle hardware modification, fuel type and other vehicle road legal requirements is suitable for the calibration you are installing, and accept a terms and conditions agreement each time a flash is made. RacingLine cannot be responsible for any calibration applied that doesn’t support your vehicle upgrades/fuel type/ local laws.
  • Please contact your supplying RacingLine dealer if unsure about any aspect before proceeding!
  • WARNING – Never flash software that does not meet the minimum hardware requirements.
  • DO NOT ever run a vehicle on lower octane fuel than is required for a selected calibration.

Using Instructions

GETTING READY: WHAT YOU’RE GOING TO NEED

Requirements for End User Flashing

  • Windows 10/11 PC with Available USB / USB-C port
  • Power supply for Laptop
  • Secure wired or stable Wi-Fi High-speed Internet Connection
  • Battery charger/tender capable of maintaining +12v while flashing
  • Available electrical outlets (for laptop and battery charger)

RacingLine PDM End User Flashing Kit Contents

  • RacingLine OBD-II PDM Cable with integrated Bluetooth & WIFI
  • USB-C to USB-C Cable
  • USB-C to USB-A Adaptor
  • Carrying Case
  • User Credentials (Provided Via Email)

Before going any further, please ensure you have all of this equipment in place before installation.

GETTING YOUR COMPUTER AND CABLE READY

TASK 1
RACINGLINE APP ACTIVATION

  • You will first need to download the latest PDM Client Software App onto the PC Laptop that you will be using to flash your vehicle, via the link included in your activation email from RacingLine, or via the link below. You do not need to be with your vehicle at this stage.
  • REMINDER: THIS DOWNLOAD REQUIRES YOUR PC COMPUTER TO BE OPERATING ON WINDOWS 10 OR NEWER.

TASK 2
REGISTERING ON THE SYSTEM.
(You still do not need to be with your vehicle at this stage)

  • Once downloaded, Run/Double click the setup application (RacingLine OEM+ Setup) run through the installer, and accept launch RacingLine OEM+.
  • This opens the app and presents you with the login screen.
  • Enter the Email or Username you received in your sign-up email, and click the “Need to register or Forgot your password” Link. Please use an email you can access easily.
  • Check your email, you will now receive an email with further instructions on to complete account registration. Next, follow the link provided in this email to set up a password for your account and complete the final account information. Once completed you can login into the RacingLine Client using your email address and new password.

YOU’RE NOW READY TO GO TO YOUR VEHICLE.

TASK 3
PRE-FLASHING PREPARATION.

  • Important – Park the vehicle in a location with a high-speed internet connection (preferably a covered garage).
  • Important – The vehicle must be in the range of electrical outlets, to use a Battery Stabiliser on the vehicle (CTEK or Similar Battery Stabiliser, 15-20 Amps) and allow power for the laptop being used for flashing.
  • Connect the battery stabiliser unit to the battery-positive terminal and vehicle earth point. (Earth location will vary). Never connect directly to the vehicle battery! Please see your vehicle’s owner’s manual for details.

You are now all ready and setup to install RacingLine Software.

PRE-FLASH VEHICLE PREP

Important Reminder – Disable any third-party antivirus/firewall programs, before preforming a flash using the PDM.
Now it’s time to get into the vehicle:

  1. First, connect your PC laptop to its power supply and ensure a stable internet connection.
  2. Verify that your battery charger is connected to the vehicle.
  3. Turn off any power drawn from the battery. Ie. Climate control / Headlights / Media system / etc.
  4. Start up the RacingLine Client App on your laptop & log in (if not already open).

From this point, the RacingLine App will guide you through the flashing process.
The procedure is outlined below, but please follow the on-screen instructions and prompts.

VEHICLE FLASH

BEGIN

  • On the home screen, click “CLICK HERE TO BEGIN”

CONNECTION

  • Now follow the three instruction steps on the

  • “CONNECTION” screen, once completed click

  • “CONTINUE”.

  • Accessories’ position means turning the key/ignition to ON without starting the engine.

  • DO NOT press the brake pedal. DO NOT start the engine. So ignition is ON – Engine is OFF

ECU OR TCU?

  • At this stage, the RacingLine Portal will search for compatible vehicle controllers (Engine

  • ‘ECU’/ Transmission ‘TCU’). This process could take a minute or so. Once the search is complete, click on the controller you wish to flash to continue.

  • The best practice for DSG owners is to flash the TCU first (if TCU credits have been purchased).

  • If your vehicle is a manual transmission, or if no TCU is currently available, we advise to flash the Low Torque version ECU calibration where available for your vehicle. Once a suitable TCU calibration is made available, or an upgraded clutch is fitted, you can update to High Torque.

SELECT PRODUCT

  • Having selected either ECU or TCU, on this screen, you can choose the calibration stage you require, including the return to stock option.
  • Please ensure to scroll down the entire display to view all available calibrations.

For calibrations that exceed your allocated flash credits, a lock icon will display on the calibration. Contact your supplying dealer if you want to add credits.

SPECIFICATIONS

  • Once a calibration is selected, a feature list will be displayed, including the required hardware list.
  • Ensure to scroll down the entire screen to read all the calibration’s features and click ‘CONTINUE’ when ready.

WARNING: Never flash software that does not meet the minimum hardware requirements.
DO NOT run a vehicle on lower octane fuel than required for a selected calibration.

CHOOSE OPTIONS
Now select which calibration option of the Stage you want. Again, you may need to scroll down the entire display to view all available calibrations.

  • If the vehicle’s current software calibration is unknown or has previously had other aftermarket software uploaded on either the ECU or TCU, ensure you flash the vehicle to stock first before selecting which calibration you require.
  • WARNING: Never flash software that does not meet the minimum hardware requirements.
  • DO NOT run a vehicle on lower octane fuel than required for a selected calibration.

REVIEW SELECTION
Please note the ‘COMMIT AND FLASH’ button at the bottom is not live if the ‘TERMS & CONDITIONS’ box hasn’t been read and confirmed by clicking the box (not applicable to all markets).

  • Please enter your details fully here so our Tech Support can identify you if you require any assistance. In ‘Session Notes’ it’s your choice to add any of your notes, or leave them blank.

FLASHING
Now follow prompts on the screen throughout this section, performing any necessary Key/Ignition cycles if prompted.

  • DO NOT START THE ENGINE / DO NOT TURN THE KEY OFF / DO NOT DISCONNECT THE ‘PDM’ CABLE DURING THIS FLASHING PROCESS.
  • Throughout the flashing process, your vehicle will display multiple warning lights on the dashboard from several vehicle systems. This is normal and will be resolved at the end of the flashing process.

FLASH SUMMARY

  • Once flashing is complete, follow any further Key/Ignition cycle prompts.
  • If no errors occurred during the flashing process, you will see ‘FLASHING COMPLETED
  • SUCCESSFULLY’. At this point, you may close the RacingLine Client and start the vehicle.

If you have purchased both TCU and ECU and have just flashed TCU, now select ‘TAKE ME HOME’ and start the process again for ECU Flash.
Note: Failure to complete a TCU flash will prompt an error message at this stage.
Unfortunately, this is normally due to your TCU being locked. If your attempt to flash the TCU fails, please select ‘TAKE ME HOME’, return to the start by clicking ‘CLICK HERE TO BEGIN’ and repeat the above process to and flash the TCU to ‘STOCK’.

FLASH COMPLETE!
The RacingLine Client App will now clear any faults stored after the flash process is completed.
Should any codes or DTCs remain after the flashing process, these can be cleared with a VCDS cable or by driving the vehicle for a few minutes after the flash is completed.

  • If you have any questions about your installation or usage, please contact your supplying dealer for advice.
  • Disconnect the RacingLine PDM from the vehicle’s OBD port.
  • Disconnect the battery charger.
  • If you encounter any technical issues during the flashing process, please contact us.

The vehicle will now require a period of adaptation for both ECU and TCU calibrations. You should use the vehicle normally during this period, but note that it’s normal for the process to result in slight changes to the vehicle and driving characteristics as the controllers adapt.

YOU’VE FINISHED!
Now that you have understood the RacingLine Client App and Flashing Process, you can rapidly repeat this procedure any time to switch between calibration options, or return your vehicle to stock.

FINALLY, PLEASE REMEMBER

  • With the RacingLine Performance Software calibration now uploaded to your vehicle, you will experience a noticeable difference in the performance of the vehicle. Please drive carefully as you adapt, and do not carry out any performance testing on the public road.
  • Remember that it is your responsibility to notify your insurer of any modifications carried out.
  • Your manufacturer warranty may be invalidated by installation of aftermarket software to ECU and/or TCU.

JEALOUS FRIENDS?
Did you know that you can flash multiple cars using your RacingLine PDM? If you have another car in your household, or a friend who wants to get tuned, simply contact your supplying dealer who can help you to flash another car using your PDM. Credits and flash history are stored on our server under your username, so flashing multiple other vehicles won’t affect your tuning or history in any way. Share some love today!

ANY QUESTIONS OR ISSUES?

FIRST-LEVEL SUPPORT
YOUR RACINGLINE SUPPLYING DEALER

  • Your first point of assistance should always be your supplying dealer. As local experts in your region, they can advise on your car’s specifications, fuel types etc that may apply to your area.
  • They will of course be in your timezone and language.
  • Your supplying dealer can also provide first level Technical Support if you are having any difficulties installing the RacingLine App or connecting to your computer.
  • Your RacingLine Dealer has direct access to the RacingLine Calibration Support Platform in the UK, so will be able to raise any issues that may arise directly with our team to ensure resolution.
  • All billing enquiries must go through your supplying dealer.

SECOND-LEVEL SUPPORT
GETTING IN CONTACT WITH RACINGLINE

  • If your RacingLine Dealer has been unable to resolve your query or issue, you can escalate your question to the RacingLine Team who are of course committed to ensuring that you are delighted with your RacingLine Software so can step in to assist.
  • Please contact our tech team via email on oemplus@racingline.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals