Prestel EDP-4K100LKVM HDBaseT Extender User Manual
- May 15, 2024
- Prestel
Table of Contents
Prestel EDP-4K100LKVM HDBaseT Extender
Specifications
- Technical: DP 1.2a Compliance, HDCP 2.2 Compliance
- Video Bandwidth: 21.6Gbps
- Video Resolution: Up to 4K@60Hz YUV 4:4:4
- USB Compliance: USB 1.1
- IR Level: 5Vp-p Wideband
- IR Frequency: 20K-60KHz
- Transmission Distance: 1080P@60–492ft/150m, 4K60–328ft/100m
- Color Space: RGB, YCbCr_4:4:4, YCbCr_4:2:2, YCbCr_4:2:0
- Color Depth: 8/10/12bit
- HDR Audio Format: HDR, HDR10, HDR10+, Dolby Vision, HLG
- ESD Protection
- Power Consumption: 13.2W (Max.)
Product Usage Instructions
Connection and Setup
- Ensure the product is connected using UTP connectors following the direct interconnection method.
- Connect the Transmitter and Receiver units using a single CAT6 cable for signal transmission.
- Power on the units and ensure all connections are secure.
Operating the Product
To control a DisplayPort PC via the KVM function:
- Connect the keyboard and mouse to the designated ports on the Transmitter unit.
- Use the provided IR remote to switch between connected devices if needed.
Advanced Features
The product supports advanced features such as bi-directional IR, RS-232, USB KVM signal pass-through, and bi-directional POC function. Ensure proper setup and configuration for utilizing these features.
FAQ
- Q : Can I extend the signal transmission distance beyond the specified limits?
- A : It is recommended to adhere to the specified transmission distances for optimal performance and signal integrity.
- Q: How do I update the MCU firmware?
- A : Use the Micro USB port labelled “SERVICE” on the Transmitter unit to update the MCU firmware as needed.
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shocks, lightning strikes, etc. Use of
surge protection systems is highly recommended in order to protect and extend
the life of your equipment.
Caution
The product requires the use of UTP connectors. Please connect in the direct
interconnection method and do not cross-connect.
Introduction
This 4K60 DP Extender can extend DP signal, bi-directional IR control signal, bi-directional RS-232 signal and USB KVM signal to a distance up to 328ft/100m for 4K60 signal or 492ft/150m for 1080P signal via a single CAT6 cable. It converts the DP signal to a standard HDBaseT signal and transmits it through a LAN cable. It can easily control signal source devices or display devices from the remote end through a bi-directional IR signal pass-through function. Video resolution is up to 4K2K@60Hz YUV 4:4:4. It also supports a bi-directional POC function. Supporting for DisplayPort 1.2 allows for the transmission of visually lossless, highly detailed 4K Ultra HD resolutions, perfect for eye- catching digital signage or detailed content in medical setups. This extender also supports lossless audio formats including Dolby TrueHD and DTS-HD, to add powerful multi-channel sound to video content, providing an enhanced experience and sense of realism for the viewer. USB KVM connectivity allows for full control of a DisplayPort PC from a local console, which can be stored in a secure or controlled temperature environment, while seamlessly providing consistent video content to the display.
Features
- DP 1.2a and HDCP 2.2 compliant
- Support 21.6Gbps video bandwidth
- Support video resolution up to 4K2K@60Hz YUV 4:4:4
- Signal transmission distance can be extended up to 328ft/100m for 4K60 signal or 492ft/150m for 1080P signal via a single CAT6 cable
- Support LPCM2.0 (96KHz), Dolby Digital Plus 5.1CH and DTS-HD Master 7.1CH
- With smart methods of compression for visually lossless transmission
- Control a single DisplayPort PC, keyboard and mouse via the KVM function
- Bi-directional IR, RS-232 and USB KVM signal pass-through are supported
- Support bi-directional POC (Power over Cable) function
- Advanced EDID management
- Compact design for easy and flexible installation
Package Contents
- 1 × 4K60 DP Extender Extender (Transmitter)
- 1 × 4K60 DP Extender Extender (Receiver)
- 1 × IR Blaster Cable (1.5m)
- 1 × IR Wideband Receiver Cable (1.5m)
- 2 × 3pin-3.81mm Phoenix Connector
- 1 × USB2.0 Cable (USB-A to USB-B, 1.5m)
- 4 × Mounting Ear
- 8 × Machine Screw (KM3*4)
- 1 × 24V/1A Locking Power Supply
- 1 × User Manual
Specifications
Technical
DP Compliance| DP 1.2a
HDCP Compliance| HDCP 2.2
Video Bandwidth| 21.6Gbps
Video Resolution| Up to 4K@60Hz YUV 4:4:4
USB Compliance| USB 1.1
IR Level| 5Vp-p
IR Frequency| Wideband 20K-60KHz
Transmission Distance| 1080P@60–492ft/150m, 4K60–328ft/100m
Color Space| RGB, YCbCr_4:4:4, YCbCr_4:2:2, YCbCr_4:2:0
Color Depth| 8/10/12bit
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
---|---
Audio Format| LPCM2.0 (96KHz), Dolby Digital Plus 5.1CH and DTS-HD Master
7.1CH
ESD Protection| Human body model — ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Connection
Transmitter
| Input: 1 × DP IN [20-pin female]
Output: 1 × HDBT OUT [RJ45, 8-pin female] Control: 1 × IR IN [3.5mm Stereo Mini-jack]
1 × IR OUT [3.5mm Stereo Mini-jack]
1 × RS-232 [3pin-3.81mm Phoenix Connector] 1 × PC [USB-B, 4-pin female]
1 × SERVICE [Micro USB]
Receiver
| Input: 1 × HDBT IN [RJ45, 8-pin female] Output: 1 × DP OUT [20-pin female] Control: 1 × IR IN [3.5mm Stereo Mini-jack]
1 × IR OUT [3.5mm Stereo Mini-jack]
1 × RS-232 [3pin-3.81mm Phoenix Connector] 2 × USB 1.1 [USB-A, 4-pin female]
1 × SERVICE [Micro USB]
EDID Setting
| EDID DIP switch is used for the EDID setting. (Dial to COPY by default)
COPY: Copy the EDID of the DP OUT port of Receiver
STD: Default 1080P 2CH
Mechanical
Housing| Metal Enclosure
Colour| Black
Dimensions| Transmitter/Receiver: 140mm (W) × 65mm (D) × 18mm (H)
Weight| Transmitter: 241g, Receiver: 253g
Power Supply| DC 24V/1A;
Support bi-directional POC function
Power Consumption| 13.2W (Max.)
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Operation Controls and Functions
Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | PWR LED | The red LED is on when the Transmitter is powered on. |
2
| EDID DIP
switch
| Used for EDID setting (dial to COPY by default). COPY: Copy the EDID of
the DP OUT port of Receiver. STD: Default 1080P 2CH
3| SERVICE| Micro USB port, used to update MCU firmware.
4
| ****
DC 24V
| DC 24V/1A power input port.
Note that the extender supports the POC function, it means that either the Transmitter or Receiver is connected to a 24V/1A power supply, the other
doesn’t need a power supply.
5| HDBT OUT| HDBT output port, connected to the HDBT IN port of the Receiver with CAT6 cable.
6
| ****
Link Signal Indicator (Green)
| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
7
| Data Signal Indicator (Yellow)| ▪ Illuminating: DP signal with HDCP.
▪ Flashing: DP signal without HDCP.
▪ Dark: No DP signal.
8| DP IN| DP signal input port, connected to DP source device such as computer
host.
No.| Name| Function Description
---|---|---
9| IR IN| Connected to IR receiver cable. The IR receive signal will emit to
the IR OUT port of the Receiver.
10| IR OUT| Connected to IR blaster cable. The IR emit signal is from the IR
IN port of the Receiver.
11| RS-232| 3-pin phoenix connector, connected to a PC or control system for
RS-232 command transmission.
12| PC| USB-B port, connected to PC.
Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | PWR LED | The power LED is on when the Receiver is powered on. |
| 2 | SERVICE | Micro USB port, used to update MCU firmware. |
3
| ****
DC 24V
| DC 24V/1A power input port.
Note that the extender supports the POC function, it means that either the Transmitter or Receiver is connected to a 24V/1A power supply, the other
doesn’t need a power supply.
4| HDBT IN| HDBT input port, connected to the HDBT OUT port of the Transmitter with CAT6 cable.
5
| ****
Link Signal Indicator (Green)
| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
| No. | Name | Function Description |
|---|
6
| Data Signal Indicator (Yellow)| ▪ Illuminating: DP signal with HDCP.
▪ Flashing: DP signal without HDCP.
▪ Dark: No DP signal.
7| DP OUT| DP signal output port, connected to DP display device such as TV or
monitor.
8| IR IN| Connected to the IR receiver cable. The IR receive signal will emit
to the IR OUT port of the Receiver.
9| IR OUT| Connected to the IR blaster cable. The IR emit signal is from
the IR IN port of the Receiver.
10| RS-232| 3-pin Phoenix connector, connected to a PC or control system for
RS-232 command transmission.
11| USB-A| Two USB-A ports, connected to a keyboard or mouse.
IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
Note
- When the angle between the IR receiver and the remote control is ±45 °, the transmission distance is 0-5 meters;
- When the angle between the IR receiver and the remote control is ±90 °, the transmission distance is 0-8 meters.
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>