QUIGO LAMP-00X Sunset Lamp Projector User Guide
- June 15, 2024
- QUIGO
Table of Contents
QUIGO LAMP-00X Sunset Lamp Projector
DIMENSION
App Connection
-
Scan the QR code to download the App
Find the ‘istrip’ APP anoturn on your Bluetooth -
Top right corner settings Set language. (This page has many other features for customization)
Keep your lights on/ Open the menu Ill in the top left corner. In the ‘Devices’ section Connect your device
Safety Warnings
-
Please use this product in strict accordance with the instructions to avoid accidents such as falling, electric shock, and fire.
-
Please do not arbitrarily disassemble or change the parts of the lamp to avoid accidents such as breakage, falling, electric shock, and fire.
-
Children under twelve years old need to use this product under adult supervision.
-
The power supply voltage should not exceed the specified adapter voltage: sv 2A.
Long time working in the non-rated voltage range will easily cause premature damage to the lamp. -
Please do not use this product for a long time to avoid the danger of high temperature from the lamp heating up.
-
Please do not look directly at the light source.
-
Please do not touch the lamp head directly to avoid burns.
-
Please do not put the lamp in a tilted, unstable place.
Do not put the lamp in a humid place, such as the bathroom or outdoor use. -
Please do not place it on top of high-temperature objects or directly on top of objects such as stoves, gas, and exhaust gas to avoid damage.
-
To ensure safety, please entrust electrical professionals when repairing and inspecting lamps.
Non-specialists are prone to danger. -
When the luminaire appears abnormal, please cut off the power quickly and ask the professional to check and repair it.
-
When there is dirt on the surface of the luminaire, please use a soft cloth dipped in soapy water to wring it out, and then wipe it with a dry cloth. Please do not wipe with a corrosive liquid such as thinner, gasoline, chemical solvent, etc., otherwise, it will lead to serious discoloration or damage to the lamps.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed sand operated with minimum distance of 20 cm between the radiator and your body.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
