motorola PIP11 Audio Baby Monitor – Night Light User Guide

Quick start guide

Model: PIP11

At a glance

Baby unit

A Night light (amber LED)
B Microphone
C Power button Press and hold to turn the baby unit on or off.
D Power / Linking LED indicator Turns on when the parent unit is powered on and linked to the baby unit. Flashes when the parent and baby units are not linked with each other.
E Speaker
F Temperature sensor
G Power jack

Parent unit

A Microphone
B Menu / OK
Enter the main menu.
Confirm menu options.
C Power jack
D Display
E Power / Linking LED indicator Turns on when the parent unit is powered on and linked to the baby unit. Flashes when the parent and baby units are not linked with each other.
F Scroll up / Volume up Press to increase the speaker volume or scroll up in the screen.
G Power button
Press and hold to turn the parent unit on or off.
Press to turn the night light of the baby unit on or off.
H Back / Two-way talk Press to go back to the previous level. Press and hold to speak to your baby.
I Scroll down / Volume down / Mute
Press to decrease the speaker volume or scroll down in the screen.
Press and hold to mute the speaker.
J Speaker
K Battery compartment

Connect and charge

Baby unit

1. Plug the DC plug of the power adaptor into the DC jack on the rear of the baby unit and plug the other end of the AC adaptor into the AC power outlet.
2. Switch on the AC power.

WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 meter or 3 feet away). Do not remove the tags from the AC Adapters. Only use the AC Adapters provided.

Parent unit

1. Lift up the battery cover to remove it from the parent unit.
2. Insert the rechargeable Ni-MH battery cells supplied. Note the ’+’ and ’-’ markings inside the battery compartment and insert in the correct direction.
3. Slide the battery cover back into place.

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH rechargeable batteries) supplied with your PIP11.

1. Plug the DC plug of the power adaptor into the DC jack on the side of the parent unit and plug the other end of the AC adaptor into the AC power outlet.
2. Switch on the AC power. The parent unit turns on.
3. When charging the batteries for the first time, charge for at least 16 hours continuously.
4. When the parent unit is fully charged, will appear steadily on the display.

Note
If is shown on the display, recharge the parent unit before using it again. When charging, will scroll on the display.

Display icons

|  Turns on when the parent unit is connected and within range.
Flashes when the parent unit is not connected and is out of range.
---|---
|  Turns on when listening to lullabies.
|  Turns on when the sound alert is activated.
Flashes when the sound alert is triggered.
|  Turns on when the speaker volume is off.
|  Turns on when the night light is on.
|  Indicates the current battery level.

Note
If you do not press any button on the parent unit for 30 seconds, the display will automatically return to standby.