P and C MWTK60 20 Inch One Piece Stainless Steel Microwave Trim Kit Instructions

October 30, 2023
P and C

P and C MWTK60 20 Inch One Piece Stainless Steel Microwave Trim Kit

P-and-C-MWTK60-20-Inch-One-Piece-Stainless-Steel-Microwave-Trim-Kit-
PRO

PRODUCT INFORMATION

The MWTK60 is a one-piece stainless steel microwave trim kit designed to create a finished look for microwaves that are placed within cabinet openings. This easy-to-install trim kit features a smooth clean finish to instantly give your kitchen a modern makeover. It is compatible with under-counter microwaves. Create a finished look for microwaves that are placed within cabinet openings. This easy-to-install trim kit features a smooth clean finish to instantly give your kitchen a modern makeover.

FEATURES

  • Designed to fit a 24” (60cm) oven cabinet
  • Creates integrated look for your microwave
  • Recommended use with Panasonic 1.6 cu. ft. microwave – Model# NNSD786S or equivalent.
  • Works well in an appliance tower over a built-in oven, or under-counter.

Compatible With

  • Panasonic NNSD786 Microwave
  • Panasonic NNSD797 Microwave

DIMENSION

P-and-C-MWTK60-20-Inch-One-Piece-Stainless-Steel-Microwave-Trim-
Kit-1

INSTALLATION DETAILS

VOID CUT-OUT

P-and-C-MWTK60-20-Inch-One-Piece-Stainless-Steel-Microwave-Trim-
Kit-2

  1. Unscrew the 4 screws holding the 2 pieces of wood in place, and retain the screws
  2. Hold the MWTK-60 in place and position the 2 pieces of wood against the cabinet sides and against the MWTK. Remove the MWTK
  3. Screw the 2 pieces of wood onto the base of the cabinet. The wooden strips should touch the inside of the front of the MWTK-60, and be aligned against the side gables. (wooden stripes 18”= 46cm apart)
  4. Being careful not to scratch the microwave door, lift the microwave onto the wooden strips, and move it back about 2 inches.
  5. Place the MWTK-60 into position. Use the 4 screws and screw them through the flanges into the side gables.
  6. Pull the microwave forward, and align the front of the microwave with the front of the MWTK-60
  7. To stop the microwave from sliding backwards whilst opening it might be necessary to attach a piece of wood behind the feet of the microwave, on the wooden supports
  8. Air must be able to flow from the microwave upwards and into the room, or roof space. Failure to comply will void the manufacturer’s warranty on the microwave oven.

Other Product Downloads Available at porterandcharles.ca

WARRANTY INFORMATION

Porter & Charles Appliances are designed and manufactured to the highest standards. Each appliance is covered by comprehensive 2-year parts and labour warranty. Refer to product warranty policy for complete terms and conditions.

FOR PARTS & SERVICE
Euro-Parts & Service 39822 Belgrave Road, Belgrave, ON. N0G 1E0 1 866 722 2262
www.euro-parts.ca
parts@euro-parts.ca
service@euro-parts.ca
Porter & Charles appliances are imported and distributed in North America by Euro-Line Appliances Inc. For more information, please visit one of our showrooms or www.ela.ca / www.elawest.ca

Notes: Porter & Charles reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice.
Warranties: Please see the Use & Care manual or Porter & Charles website for a statement of limited warranty. For more information on our entire line of products, go to www.porterandcharles.ca or call 905.829.3980
© Porter & Charles. All rights reserved.

EURO-LINE APPLIANCES INC.
871 Cranberry Court, Oakville, ON L6L 6J7 Canada
905 829 3980
1 800 421 6332
info@ela.ca

101-1014 Homer Street, Vancouver, BC V6B 2W9, Canada
604 235 3980
1 855 ELA WEST (352 9378)
info@elawest.ca

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals