DISCOVER ENERGY SYSTEMS 12-48-6650 Type-B Battery Discharge Indicator User Guide

TYPE-B BATTERY DISCHARGE
INDICATOR (CAN BUS)
**QUICK START GUIDE

BATTERY MODELS
**

AES LIFEPO4 INDUSTRIAL
BATTERIES:
12-48-6650
12-36-6700
14-24-2800
14-36-3000
14-48-3000| AES PROFESSIONAL
BATTERIES:
DLP-GC2-12V
DLP-GC2-24V
DLP-GC2-36V
DLP-GC2-48V
---|---

INTRODUCTION

The Type-B Battery Discharge Indicator (BDI) communicates with Discover Lithium batteries over CAN Bus using the LYNK Port on AES PROFESSIONAL or AEBus Port on AES LiFePO4 Industrial batteries. The TYPE-B BDI displays warnings, charging status, and state-of-charge (SOC) using incremental LED SEGMENTS. The BDI device is plug and play, deriving both power and battery status directly from the LYNK Port or AEBus Port. The TYPE-B BDI will providethe aggregate SoC for up to 20 Discover Lithium Batteries. The Type-B BDI is rated IP 30, with an installed frontal rating of IP 65.

1.1 Compatible Batteries
AES LiFePO4 Industrial Batteries:
12-48-6650, 12-36-6700, 14-24-2800, 14-36-3000, 14-48-3000
AES PROFESSIONAL Batteries:
DLP-GC2-12V, DLP-GC2-24V, DLP-GC2-36V, DLP-GC2-48V

INSTALLATION OPTIONS AND REQUIRED MATERIALS

The Type-B Battery is available as a head unit (950-0034) and used with AES LiFePO4 or AES PROFESSIONAL batteries. The installer must supply a cable of the appropriate length with a pinout and connector appropriate for either an AES LiFePO4 Industrial battery or an AES PROFESSIONAL battery. Refer to section 6.0 Battery Pinout Assignments for details on connectors and pinouts. A kit (950-0039) that includes both the TYPE-B head unit (950-0034) and an LYNK NETWORK BDI 1.8M cable (790-0079) is available from Discover for installation with AES PROFESSIONAL batteries.

LED INDICATORS

3.1 Normal Operation
Only 1 LED will be on during regular operation.

Solid on – State of Charge range 10% to 19 %
LED 2| Solid on – State of Charge range 20% to 29 %
LED 3| Solid on – State of Charge range 30% to 39 %
LED 4| Solid on – State of Charge range 40% to 49 %
LED 5| Solid on – State of Charge range 50% to 59 %
LED 6| Solid on – State of Charge range 60% to 69 %
LED 7| Solid on – State of Charge range 70% to 79 %
LED 8| Solid on – State of Charge range 80% to 89 %
LED 9| Solid on – State of Charge range 90% to 94%
LED 10| Solid on – State of Charge range 95% to 100%

3.2 Charging Operation
The active State of Charge LED will slowly flash
3.3 Battery Protection Indication
When a connected battery has active protection (faults), LED 1 through LED
10 will all flash at the same time.
3.4 No Battery Detected
The LED interface will continuously cycle through all LEDs when the BDI-B is powered on, but no batteries are detected.

 ELECTRICAL OVERVIEW

MECHANICAL (mm)

5.1 Pinout Assignments for BDI (MOLEX 39-28-1083)

BATTERY PINOUT ASSIGNMENTS

6.1 Pinout Assignments for AES LiFePO4 Industrial Batteries

IEC M12 A-Coding 12 Pin

6.2 Pinout Assignments AES PROFESSIONAL Batteries
IEC M12 A-Coding 5 Pin

BDI TYPE-B ENVIRONMENTAL SPECIFICATIONS

Operation: -40°C to 85°C (-40°F to 185°F)
Storage: -50°C to 90°C (-58°F to 194°F)
Humidity: 95 % RH non-condensing at 38°C (100°F)
Rated IP 30, with an installed frontal rating of IP 55 when installed with the provided gasket.

INSTALLATION

8.1 Gasket Mounting – Front or Back

Secure BDI with M 2.5 bolts or screws.

8.2 Connect Harness
Connect the cable harness to either the LYNK Port or AEbus Port on thebattery, then connect to TYPE-B BDI.

NOTES

Documents / Resources

| DISCOVER ENERGY SYSTEMS 12-48-6650 Type-B Battery Discharge Indicator [pdf] User Guide
12-48-6650, 12-36-6700, 14-24-2800, 14-36-3000, 14-48-3000, DLP-GC2-12V, DLP- GC2-24V, DLP-GC2-36V, DLP-GC2-48V, 12-48-6650 Type-B Battery Discharge Indicator, Type-B Battery Discharge Indicator, Battery Discharge Indicator, Indicator
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>