EWA 1305639 Bluetooth Speakers User Manual
- June 5, 2024
- EWA
Table of Contents
EWA 1305639 Bluetooth Speakers
Packaging
Please make sure all below parts inside when the box opened
–Speaker
–USB Charge Cable
–User Manual
Quick Start Guide
ON/OFF: Hold the button 2s to turn On/ Off the speaker.
Charging: Use a Micro USB calble to charge the speaker.
Connection
Open the wireless setup on your Smart device, search and click “EWA Audio A119 ” to connect the speaker.
Support TWS
You can get two A 119 speakers paired with each other for turly wireless stereo. (Another speaker need to be purchased seperately)
-
Turn off the connection between your device and the speaker.
-
Turn on two speakers.
-
Please press the on / off button of both speakers quickly and continuously twice at the same time.
Watt till a “DUU” sound, then you make it. The blue lights flash slowly after the two speakers are successfully interconnected. -
Enable your wireless setting, then search and find “EWA Audio A119” to pair, the blue lights stay on after the pairing is successful.
Tips:
- Two matched speakers will automatically connect to each other thereafter. It will automatically pair to previous wireless device as well.
- If auto connect failed, please restart devices, or clear wireless device connected records, and repeat steps as above.
Indicator Status
|
Red light
| Blue light
---|---|---
Charging| ON|
/
Fully Charged
| /| /
Standby| /|
ON
Playing
| /| Blinking Slowly
Pairing| /|
Blinking Quickly
Specifications
- Battery: 400 mAh
- RMS: 3W
- Frequency: 100Hz-18KHz
- SNR: S/N~85dB
- Size: 0 41.4x34mm
- Protocols: HS/HF, A2DP, AVRCP, OPP
- Playing time: 4 Hours
- Charge Time: 2 Hours
- Waterproof Level: IPX7
Notice
- Turn on the speaker, it wil automatically enter pairing mode by default, then automatically search and connect to pa iired devices.
- Do not touch chemicals such as benzene, thinner, etc.
- Please clean the speaker only use dry towels.
- Do not put the speaker close to open-flames such as lighted candles.
- It is a duty to protect the environment while you are considering drop the speaker, especially the battery inside.
- The speaker could only use in mild climate conditions
- Do not trample or squeeze the charging cable.
- User should not try to took the speaker apart, the speaker did not contain any component which could fixed by users.
- Please keep away from strong magnetic and electric fields
Warranty Card
Dear Users,
Than ks for ch oosing EWA products.
For after sa les service, please write down the contact details of you and the
agent.
Model : ____
Date : ____
Your name: __
Your phone No. : ____
Your address : ____
Sales agent :
Agent tel : ____
Agent address :
Agent seal : __
For more information and instructions on how to get/ warranty service, send email to info@ewacn.com
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
J.V.M. Electronics Co,.Ltd
Shajing, Bao’an, Shenzhen 518000
info@ewacn.com
www.ewacn.com
+86-755-29918835