dreame V10-EU Vacuum Cleaner Owner’s Manual
- June 13, 2024
- dreame
Table of Contents
V10-EU Vacuum Cleaner
Product Information:
Service Number: CAS-DR-221020-034
Customer Name: Mme Dara Phouthahamat
Address: 11 rue jean jaures
Model: Dreame Vacuum cleaner V10-EU (EU)
Serial Number: MH17042018910080811PF
Purchasing Date: 2021-02-13
Delivery Date: 2023-01-25
Warranty: 2023-01-16
Product Usage Instructions:
Before using the vacuum cleaner, please make sure to replace the
filter.
The filter is responsible for intercepting particle dust below
0.5um and various suspended solids. It is important to clean the
filter regularly to prevent clogging, as a clogged filter can
hinder the vacuum cleaner’s performance.
The filter can be washed repeatedly, but it deforms each time it
is washed. Therefore, it is recommended to replace the filter at
least once a year to ensure optimal performance.
To replace the filter, follow these steps:
-
Make sure the vacuum cleaner is turned off and unplugged from
the power source. -
Locate the filter compartment on the vacuum cleaner.
-
Open the filter compartment by removing any latches or
covers. -
Take out the old filter and dispose of it properly.
-
Insert the new filter into the filter compartment, making sure
it is securely in place. -
Close the filter compartment and secure any latches or
covers.
Once the new filter is installed, you can use the vacuum cleaner
as usual. Remember to regularly clean the filter to maintain its
efficiency and prolong the lifespan of your vacuum cleaner.
Service Number Address Model
Received Date
Maintenance Report
Basic Information
CAS-DR-221020-034
Customer Name
Mme Dara Phouthahamat
11 rue jean jaures
Dreame Vacuum cleaner V10-EU (EU)
Purchasing Date
2021-02-13
2023-01-16
Delivery Date
2023-01-25
Fault Description
Tel E-Mail Serial Number Service Type
+33696752685 dara.ph@orange.fr MH17042018910080811PF
Warranty
Issue Type: Abnormal Charging, Fault Description: Not charging
Detection and Maintenance
Problem Reported/Found: Hardware fault – faulty motor,Can’t power on,Bad
Outlooking/Deformation; Action Taken: Replaced motor & motor related
components,Replacement (repair) of battery/charging related
components,Replaced the air duct components,Clean process
Please replace the filter before using it.
Comments
The filter is used to intercept particle dust below 0.5um and various suspended solids. It needs to be cleaned regularly; otherwise, it will be difficult for the vacuum cleaner to work correctly due to clogging. Although the filter can be washed repeatedly, it deforms each time it is passed. Generally, the filter of vacuum cleaner needs to be replaced at least once a year.
Tips: How to clean the filter of a vacuum cleaner? 1. Take out the filter and rinse it with clean water. It is not recommended to use a brush to avoid damage to the Hypa and reduce the filtering effect. Be careful not to puncture the filter when you remove the dirt in the gap of the filter 2. Do not put it back in the machine immediately after cleaning, but let it dry naturally in a dry place; please do not expose it to the sun. 3. After natural air drying, please install it back to the vacuum cleaner and tighten the cover.
Item(s)
Material Code
Item Name
Quantity
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>