HUSKY 50821 Floor Liner Instruction Manual
- June 13, 2024
- Husky
Table of Contents
HUSKY 50821 Floor Liner
Product Information
- Product Number: PT #50821
Care and Use Instructions
The X-Act Contour Custom Molded Second Seat Floor Liner is designed to provide
protection and enhance the appearance of your vehicle’s interior. Please
follow the instructions below for proper installation and usage:
Installation Instructions
- Before installing the second seat liner, ensure that the front row seats are moved completely forward.
- Position the new liner in the vehicle according to the provided diagram or as shown above.
- Once the liner is properly positioned, reposition the front-row seats as desired.
Care Instructions
To maintain the quality and longevity of your floor liner, follow these care
instructions:
- Regularly remove the liner from your vehicle for cleaning.
- For general cleaning, use mild soap and water. Avoid harsh chemicals or abrasive cleaners.
- Rinse thoroughly and allow the liner to air dry before reinstalling.
- Do not use silicone-based products on the liner, as they may cause a slippery surface.
For further warranty information, please visit www.huskyliners.com/lifetime- warranty
For any additional questions or concerns, refer to the complete user manual or contact our customer support.
Thank you for selecting an X-act Contour® Floor Liner from Husky Liners. Your
new second seat liner is custom molded to fit your vehicle. The liner is made
to take the place of your factory floor mat(s). For correct fit, it is
necessary to remove the factory floor mats before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight extremely
tough and durable. The easiest way to clean your liner is with a damp cloth or
sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®,
Son-of-a-Gun® or similar items is discouraged as these products make the liner
slick.
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FOR YOUR X-ACT CONTOUR CUSTOM MOLDED SECOND SEAT FLOOR LINER
TO INSTALL YOUR SECOND SEAT LINER, FIRST MOVE YOUR FRONT ROW SEATS COMPLETELY FORWARD. THEN, INSTALL YOUR NEW LINER, POSITIONING IT IN THE VEHICLE AS SHOWN ABOVE. LASTLY, REPOSITION YOUR FRONT-ROW SEATS AS DESIRED.
Warranty
View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime- warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>