Rocstor Y10E034-B1 1U 19in Wall Mount Bracket User Manual
- June 13, 2024
- rocstor
Table of Contents
Rocstor Y10E034-B1 1U 19in Wall Mount Bracket
Product Information
The 1U 19in Wall Mount Bracket for Patch Panels is a hinged black bracket designed for mounting patch panels. It has mounting holes, a hinged side panel, and cage nut holes. The dimensions of the unit are as follows:
- Height: 500mm
- Width: 153.4mm
- Depth: 406mm
- Weight: 44.4kg
This product is covered by Rocstor’s Limited Factory Warranty, which applies
to commercial or industrial use in the ordinary course of business. The
warranty is non-transferable and extends only to the original purchaser who
has properly registered the product on the Rocstor website.
Contact information for Rocstor’s corporate headquarters, technical support,
sales, and various departments can be found below.
Product Usage Instructions
- Locate a suitable wall space where you want to mount the bracket.
- Using appropriate tools, mark the positions for mounting holes on the wall.
- Drill holes into the marked positions on the wall.
- Align the bracket with the drilled holes and secure it to the wall using suitable screws or bolts.
- If necessary, attach the hinged side panel to the bracket by aligning the hinges and securing them in place.
- If using cage nuts, insert them into the cage nut holes on the bracket to provide additional support for patch panels.
- Once the bracket is securely mounted, you can proceed to install your patch panels onto it.
For any technical support or warranty-related inquiries, please refer to the contact information provided in the user manual or visit Rocstor’s website.
Introduction & Installation
Wall-Mount Bracket Installation
Rocstor recommends viewing your wall structure first before installing the
bracket. You may want to consult or have a professional installer to mount the
bracket to your wall structure. The bracket must be installed on a wall
structure that can support the mounted equipment properly. The wall structure
should be able to support at least four times the weight of the installed
mounted equipment. Make sure the wall-mount bracket is securely installed
before you mount any equipment. Failure to mount the bracket securely, may
result in personal and/or equipment damages
Equipment Installation to the Wall-Mount Bracket
Included in this mounting bracket, you will and M6 Cage Nuts, Screws, and
Plastic Washers. Use these to install equipment into the Wall-Mount Bracket.
- Use the Wing (side) of an M6 Cage and insert it into the back of the Cage Nut hole.
- Use a Cage Nut Tool or hand to apply pressure to insert a 2nd Wing of the M6 Cage Nut into a designated Cage Nut Hole. Please repeat steps 1 and 2 by inserting the remainder of the Cage Nuts for your application.
- Make sure you use the Threaded Plastic Washer over the M6 Screw.
- At this time use the M6 Cage Nuts and align the Mounting Holes in the equipment and apply the Cage Nuts in step 2.
- Now please insert the assembled Screws through the Mounting Holes in the Equipment and into the M6 Cage Nuts.
- Make sure the Screws are Tightened by using a Phillips Screwdriver
Measurements & Package Content
Units Dimension (Millimeter):
Package Contents
- 1U Wall-Mount Bracket x 1
- M6 Screws x 4
- M6 Cage Nuts x 4
- Plastic Washers x 4
- Wall Screws x 2
- Plastic Anchors x 2
- User Manual x 1
Warranty
Five-Year Factory Warranty
Rocstor provides a Limited Factory Warranty which applies to products you have
purchased for commercial or industrial use in the ordinary course of your
business.
Terms of warranty
Rocstor warrants its SolidRack product series to be free from defects in materials and workmanship for a period of five years from the date of purchase. Rocstor’s obligation under this warranty coverage is limited to repairing or replacing, at its sole discretion, any such defective products. This warranty does not apply to equipment that has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. In the event Rocstor repairs or provides a replacement of a defective product or part, the warranty does not extend the original warranty period. Rocstor reserves the right to repair or replace any parts under warranty as new or factory re-manufactured.
Non-transferable warranty
- This warranty extends only to the original purchaser who must have properly registered the product.
- The product may be registered at the Rocstor website, https://rocstor.com/customer-support/warranty registration.
Exclusions
If Rocstor tests or examines the alleged defect in the product and finds that the damages or defects do not exist or were caused by a third party or an end user’s misuse, improper installation or testing, or negligence, then Rocstor shall not be liable under the warranty. Furthermore, unauthorized attempts to repair or modify the product by wrong or inadequate electrical connection or voltage, inadequate or inappropriate site operation conditions, repair, installation of corrosive area or atmosphere, a change in location or operating conditions or use, repair by non-Rocstor designated personnel, exposure to the elements, fire, Acts of God, theft, or equipment installation not recommended or contrary to Rocstor’s specifications or recommendations. Warranties will be void and Rocstor will not be liable if the product serial number is tampered with, altered, removed, defaced or any other cause beyond the range of intended use.
Contact Information
Corporate Headquarters 12979 Arroyo Ave San Fernando, CA 91340 – USA
- Office: +1 818-727-7000
- Fax: +1 818-875-0002
- Email : info@Rocstor.com
Technical Support / RMA Hours: 9:00 am – 5:00 pm PST Mon – Fri (excluding holidays)
- Tell : +1 818-727-7000 (Domestic and Internationals)
- Fax : +1 818-875-0002
- Email : support@Rocstor.com
Sales Info Hours: 8:00 am – 5:00 pm PST Mon – Fri (excluding holidays)
- Tell : +1 818-727-7000 (Domestic and Internationals)
- Fax : +1 818-875-0002
- Email : support@Rocstor.com
Corporate, Government and Academic Customers
Our Corporate Sales Team’s goal is to help our U.S.A. and Canadian customers
find a storage solution that best serves their needs. We will help you
determine your best purchasing options. For more information please contact
the appropriate department below or call us at +1
818-727-7000.
- General sales information : sales@Rocstor.com
- Corporate sales information: corporate_sales@Rocstor.com
- Educational sales information: academic_sales@Rocstor.com
- Federal, State & Local government sales information: government_sales@Rocstor.com
Resellers/Business Development/OEM Partners
- All Channel National and International Resellers, VARs, Consultants … contact Rocstor Channel Sales: call: +1 818-727-7000
- Email : reseller_info@Rocstor.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>