HUSKY LINERS PT #5086 Floor Liners Instruction Manual

June 13, 2024
HUSKY LINERS

HUSKY-LOGO

HUSKY LINERS PT #5086 Floor Liners

HUSKY-LINERS-PT-5086-Floor-Liners-PRODUCT

Product Information

The Floor Liners (PT #5086) are designed to provide protection for the floor of your vehicle. They are made from durable materials to withstand wear and tear, spills, and debris. The liners are custom-fitted to your specific vehicle model, ensuring a perfect fit. The liners come with a molded trim groove along the seat track, allowing you to trim them according to your preferences. This ensures that you have full-range seat positioning in your vehicle. The liners also have an optional Velcro feature for added stability. Please note that the Floor Liners come with a Husky Liner Lifetime Warranty, which can be viewed at www.huskyliners.com/lifetime- warranty.

Product Usage Instructions

  1. Before installation, ensure that the floor of your vehicle is clean and free from any debris.
  2. Place the Floor Liners in the desired position on the floor of your vehicle.
  3. Observe the portion of the liner that matches the seat track.
  4. If trimming is needed for full-range seat positioning, locate the molded trim groove along the seat track.
  5. Use a utility knife or heavy shears to trim the liner along the trim groove, removing the unneeded material. Be careful while trimming to avoid damaging the liner.
  6. Once trimmed, install the liner in its final position on the floor.
  7. Position your seat as desired.
  8. For added stability, you can use the optional Velcro feature by attaching it to the liner and the floor of your vehicle.

For visual guidance on trimming, please refer to the trimming photos provided on the back of the installation instruction page.

For any warranty-related queries or further assistance, please visit www.huskyliners.com/lifetime-warranty or contact our customer support.

CARE AND USE INSTRUCTIONS

Thank you for selecting an X-act Contour® Floor Liners from Husky Liners Inc. Your new liners are custom molded to fit your specific vehicle’s floor board. The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners . However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liner is with a damp cloth or sponge and soap and water. Windex®, 409® and ArmorAll® type cleaners work as well.

INSTALLATION INSTRUCTIONS

FOR YOUR FLOOR LINERSHUSKY-LINERS-PT-5086-Floor-Liners-
FIG-1

DEPENDING ON YOUR PREFERENCES, THE LINER MAY NEED TO BE TRIMMED TO GIVE FULL RANGE OF SEAT POSITIONING IN YOUR VEHICLE. INSTALL LINER AND OBSERVE THE PORTION OF THE LINER THAT MATCHES THE SEAT TRACK. ONCE INSTALLED POSTION YOUR SEAT.  IF TRIMMING IS NEEDED, LOCATE THE MOLDED IN TRIM GROVE ALONG THE SEAT TRACK. USE THE GROVE AS A TRIMMING GUIDE AND REMOVE THE UNNEEDED MATERIAL. A UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING. PLEASE REVIEW THE TRIMMING PHOTOS ON THE BACK OF THIS PAGE.

X-ACT CONTOUR® FLOOR LINERS

  • LOCATE THE TRIM GROOVE AND REMOVE THE DESIRED MATERIAL.HUSKY-LINERS-PT-5086-Floor-Liners-FIG-2

OPTIONAL: VELCRO HUSKY-LINERS-PT-5086-Floor-Liners-
FIG-3

  • TO HELP SECURE THE SILL PLATE COVERAGE OF THE LINER FROM POSSIBLE MOVEMENT FROM HEAVY TRAFFIC, YOUR LINER COMES WITH 2 (OPTIONAL) VELCRO CIRCLES.
  • TO INSTALL, PLACE THE TWO VELCRO HOOK PADS IN THE POSITION INDICATED IN THE IMAGE DIRECTLY ABOVE. THE HOOK PAD WILL INSTALL ON THE LINER DIRECTLY OVER THE STAYPUT CLEATS™ AS SHOWN.
  • PEEL OFF THE PROTECTIVE COVER AND APPLY TO THE LINER, PRESSING DOWNWARD TO FULLY SEAT THE PAD IN PLACE. THE VELCRO LOOP PADS WILL BE INSTALLED ON THE PLASTIC SILL PLATE OF YOUR SIENNA.
  • TO PLACE THE LOOP PADS IN THE CORRECT LOCATION, FIRST SECURE THE LOOP PAD TO THE HOOK PAD ALREADY INSTALLED ON THE LINER DO NOT REMOVE THE BACKING FROM THE BACK OF THE LOOP PAD YET.
  • NEXT, INSTALL THE LINER IN THE VEHICLE.

IMPORTANAT : FINALLY, REMOVE THE COVER FROM THE ADHESIVE ON THE LOOP PAD AND PRESS DOWN TO SECURE IT IN PLACE ON THE SILL PLATE.

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime- warranty

5086_Installation_Instruction.docx 3_23_2023

PT #5086

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals