MONSTER MS22132 MUSICBOX GO High Power Outdoor Speaker User Guide
- June 13, 2024
- Monster
Table of Contents
MONSTER MS22132 MUSICBOX GO High Power Outdoor Speaker
Product Information
The product is a device that complies with part 15 of the FCC Rules. It is designed to operate within the guidelines set by the Federal Communications Commission (FCC) to ensure minimal interference and comply with radiation exposure limits. The device should be installed and operated with a minimum distance of 0cm between the radiator (the emitting part of the device) and your body. This ensures that the device is used safely and minimizes any potential health risks associated with radiation exposure.
Product Usage Instructions
- Before using the device, ensure that it is installed properly according to the manufacturer’s instructions.
- Keep a minimum distance of 0cm between the radiator and your body when operating the device.
- Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer. Unauthorized modifications could void your authority to operate the equipment.
- Ensure that the device does not cause harmful interference to other devices or systems.
- If the device is experiencing interference from other sources, it must still accept the interference and continue to operate as intended.
- Follow all additional usage instructions provided in the user manual for optimal performance and safety.
Product Overview
- Speaker Unit
- USB-C Charging Cable
- Quick Start Guide & Warranty Letter
-
Reverb adjustment
-
Power On / Off audio input selection Charging LED Indicator
-
Multi Function Button (MFB)
Master Volume Control Music play / pause… -
Lighting Effects On / Off
-
Guitar Volume Control
-
Microphone Volume Control
-
Bluetooth / LED Indicator
-
Sound mode switch
-
Previous Song / Next Song
-
MIC IN Port (6.35mm)
-
AUX IN Port
-
USB-C Charging Input
-
Reset Button
-
USB IN (Audio) Port
-
Micro SD CARD IN Port
-
Guitar IN Port
LED Indicator Guide
Description:
- Indicator light
- Indicate that the light is off
- Indicates that the LED lights dim
- Indication flash
Power/Charging
For better enjoyment, fully charge the speaker before use. A USB-C charging
cable (charge only) is included for standard USB compatible device. Please use
a 5V/2A or above power adapter (not included).
Caution:
- Use compatible standard 5 volt power adapter ONLY.
- Other incompatible charges may cause damages.
- Do not use if the connector or device is wet or damaged.
Power On/Off
To turn on the speaker, press and hold the Power On/Off Button for 2 seconds,
you will hear a power on tone. To turn off the speaker, press and hold the
Power On/Off Button for 2 seconds, you will hear a power off tone.
Caution: If no Bluetooth device is connected, the speaker will turn off
in 15 minutes.
Bluetooth Connection
First time “power on”, the speaker will enter pairing mode automatically. Paring with a new device, press the “ ” button to disconnect the current connected device. When speaker is not connected to any Bluetooth device, pairing mode will start automatically. In pairing mode, turn on Bluetooth function on your phone and search for “Monster Music box Go” for pairing. When the speaker is connected, a connected tone will be heard, the Bluetooth indicator will stop flashing and remain on.
Wireless Microphone
When the speaker is on, turn on the power switch on the wireless microphone to
use the wireless microphone.
Operating instructions
Power On: Press and hold “” for 2 seconds, the screen will display “ON”.
Power Off: Press and hold “” for 2 seconds, the screen display “OFF”.
Mute: Press the “ ” button to display ” —”.
Volume adjustment: Press the +/- button.
Frequency switch: Press the SET button to switch between different
frequency points.
Decoding: Press and hold the SET button for 5 seconds, when the screen
displays “–” circulating, turn on the speaker, until the “—” icon exits,
Decoding is complete.
Lock code: Press and hold the SET button for 5 seconds, when the screen
displays “ID–” blinking, turn on the speaker, until the “ID –” icon exits,
Lock
code complete.
- Note: When operating the unlock/lock code, the speaker needs to restart (built-in receiver board) once to complete this operation.
Music
Play/Pause: In music playback mode, press the MFB button to play/pause
the music.
Previous song: In music playback mode, press the “ ” button to go to the
previous song.
Next song: In music playback mode, press the ” ” button to go to the
next song.
Micro SD Card Playback
When speaker is on and micro SD card (Not included) is inserted, micro SD card
is the priority playback source. If you want to use Bluetooth function, press
the” U “Button to switch the source.
USB IN (Audio) Playback
When speaker is on and USB drive is inserted, USB IN (Audio) is the priority
playback source. If you want to use Bluetooth function, press the “ “Button to
switch the source.
AUX IN Playback
When speaker is on and audio source is inserted via AUX IN, AUX IN is the
priority playback source. If you want to use Bluetooth function, press the”
“Button to switch the source.
Power Saving Setting
- In Bluetooth mode, when no device is connected, the speaker will be switched off automatically in 15 minutes.
- AUX IN mode/ Micro SD card mode/USB IN (AUDIO) mode or Bluetooth mode, no music playback for 15 minutes, the speaker will be switched off automatically.
- If microphone is plugged in and idled over 15 minutes, the speaker will be switched off automatically.
Light mode
When the speaker is turned on, press the ” ” button to switch between various
lighting modes. If you want to turn off the light mode, press and hold the “ ”
button for 2 seconds to turn off the light.
Sound mode
When the speaker is on, press the “BASS” button to switch between different sound modes.
Connect two speakers, stereo mode (same model only)
- Turn on the two speakers first and do not connect Bluetooth devices (such as mobile phones),
- Press the “ “button twice on any speaker to hear a prompt tone, and the two speakers will automatically pair. After successful pairing, the Bluetooth indicator light of the main speaker will flash, and the Bluetooth indicator light of the secondary speaker will remain on.
- Enable the Bluetooth function on the phone, search for “Monster Music box Go” to connect. After successful connection, you will hear a prompt tone, the Bluetooth indicator light on the main speaker will become stays on, and the Bluetooth indicator light on the secondary speaker will remain stays on.
Reset Device
If the speaker needs to be reset, press the reset button.
Caution
- It is not recommended to replace the battery privately.
- The battery (battery pack or battery pack combination) must not be exposed to sunshine, fire or similar overheated environments.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>