PAC 2133-72242 Set Up For LED Skeletons Carrying Coffin Instruction Manual
- June 13, 2024
- PAC
Table of Contents
PAC 2133-72242 Set Up For LED Skeletons Carrying Coffin
Questions, problems, missing parts?
Questions, problems, missing parts? Before returning to your retailer, send email to our customer service department, email address is: info@pan- asian.com.hk.
WARNING: This is not a toy and is for decorative purposes only. For indoor and outdoor use. This item is not intended for use by children under the age of 14 years. Do not place product near an open fire or heat source such as a radiator, stove, etc.
IMPORTANT: Do not lean or put excessive weight on the supports or the main storage component of this item. The bases are designed to support the weight of the storage component only and should not be used for anything other than it’s intended purpose.
PARTS
-
A Feet Base
-
B Right Leg Rear
-
C Left Leg Rear
-
D Skeleton Head
-
E Skeleton Body
-
F Right Leg front
-
G Left Leg front
-
H Metal Support Rods
-
I Coffin
-
J Ground stakes
BATTERY USAGE
ADULT SUPERVISION IS RECOMMENDED WHEN CHANGING BATTERIES.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Alkaline batteries are suggested for longer life.
- Exhausted batteries are to be removed from the product.
- Dispose of exhausted batteries with care.
- Do not dispose of batteries in fire, batteries may explode or leak.
CAUTION: Please remove batteries if their power is consumed or if the product is to be left unused for a long period of tim.
RECYCLE YOUR BATTERIES: To help protect our environment, we recommend that all batteries be recycled. You can find a local recycling center by going to: http://earth911.com/hazardous/single-use-batteries/ Or, in the United States call 1-800-CLEANUP for a recycling location near you.
READ CAREFULLY & RETAIN FOR FUTURE REFERENCE!
ASSEMBLY
BATTERY REPLACEMENT & ITEM FUNCTION
Battery powered. Uses 6 “AA” batteries (batteries are included).
- Locate the battery compartment at the back of the head. Using a small screwdriver, remove the safety screw located on the battery compartment cover.
- Remove cover and clean both ends of the battery contacts and also the contacts of the device prior to installing the batteries. Insert (6) AA batteries with correct polarity.
- Replace cover and safety screw.
- The ON/OFF switch is located on the battery compartment. Move switch to ON position to activate LED lights. Switch to the OFF position and remove batteries when not in use.
- Replace batteries if the lights becomes dim.
