OLYMPUS M Zuiko Digital ED 30mm Macro Lens Instruction Manual

: June 13, 2024
: Olympus

Table of Contents

OLYMPUS M Zuiko Digital ED 30mm Macro Lens
Product Information
Product Usage Instructions
INTRODUCTION
Name of parts
Main Specifications
FCC NOTE
For customers in Europe
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OLYMPUS M Zuiko Digital ED 30mm Macro Lens

OLYMPUS-M-Zuiko-Digital-ED-30mm-Macro-Lens-fig-1

Product Information

Product Name: ED 30mm f3.5 Macro
Manufacturer: Olympus
Mount: Micro Four Thirds mount
Focal Distance: 30 mm (equivalent to 60 mm on a 35 mm camera)
Max. Aperture: f3.5
Lens Configuration: 6 groups, 7 lenses
Iris Control: f3.5 to f22
Shooting Range: 0.095 m (3.7 in.) to infinity
Focus Adjustment: AF/MF switching (MF is possible in the camera settings)
Weight: 128 g (4.5 oz.) excluding cap
Dimensions : Length 60 mm (2.4 in.)
Lens Hood Mount: None Filter Mount
Thread Diameter: N/A

Product Usage Instructions

Safety Precautions:
- Before using the product, read the instruction manual and keep it handy for future reference.
- Ensure proper handling and use of the product to ensure your safety.
Name of Parts:
- Front cap: Used to protect the front element of the lens.
- Focus ring: Used to manually adjust the focus of the lens.
- Mount index: Indicates the orientation of the lens when attaching it to the camera.
- Rear cap: Used to protect the rear element of the lens.
Exposure Compensation:
When using an external light meter, refer to the table below the diagram of the lens for exposure compensation. Note that exposure compensation is unnecessary when using the camera’s automatic exposure mode.
Magnification, Subject Distance, and Exposure Compensation:
The table below provides information on magnification (A), subject distance (B), and exposure compensation (C). (A) Magnification (B) Subject Distance (m) (C) Exposure Compensation 1/4 x 0.20 +1/3 1/2 x 0.13 +2/3 1/1 x 0.10 +1 1/3 1.25 x 0.095 +2 Note: The values in column (B) represent subject distances in meters.
AF/MF Switching:
The lens allows for AF/MF switching. In the camera settings, you can select manual focus (MF) if desired.
European Compliance:
The CE mark on the product indicates compliance with European safety, health, environment, and customer protection requirements.
Disposal of Electronic Equipment:
The symbol [crossed-out wheeled bin WEEE Annex IV] indicates that waste electrical and electronic equipment should not be thrown into domestic refuse. Please use the return and collection systems available in your country for the proper disposal of this product. For further assistance or inquiries, please contact Olympus Europa SE & Co. KG at Wendenstrasse 14-18, 20097 Hamburg, Germany or visit their website: www.olympus-europa.com.
Note: The specifications mentioned are subject to change without notice or obligation on the part of the manufacturer.

INTRODUCTION

Thank you for purchasing this Olympus product.
To ensure your safety, please read this instruction manual before use, and keep it handy for future reference.

Name of parts

OLYMPUS-M-Zuiko-Digital-ED-30mm-Macro-Lens-fig-2

Front cap
Focus ring
Mount index
Rear cap

Notes on Shooting

When using a flash, flash light may be blocked.
If performing exposure compensation using an external light meter, refer to the table below the diagram of the lens. Exposure compensation is unnecessary when using the camera’s automatic exposure mode.
- Magnification
- Subject distance (m)
- Exposure compensation

Main Specifications

Mount : Micro Four Thirds mount
Focal distance : 30 mm (equivalent to 60 mm on a 35 mm camera)
Max. aperture : f3.5
Image angle : 40°
Lens configuration : 6 groups, 7 lenses
Iris control : f3.5 to f22
Shooting range : 0.095 m (3.7 in.) to ) (infinite)
Focus adjustment : AF/MF switching (MF is possible in the camera settings.)
Weight : 128 g (4.5 oz.) (excluding cap)
Dimensions : Max. dia. Ø 57 (2.2 in.) ×
length 60 mm (2.4 in.)
Lens hood mount : None
Filter mount thread diameter : Ø 46 mm
Specifications are subject to change without any notice or obligation on the part of the manufacturer.

Precautions: Be Sure to Read the Following Warnings: Safety Precautions

Do not view the sun through the lens. It may cause blindness or vision impairment.
Do not leave the lens without the cap. If solar light is converged through the lens, a fire may result.
Do not point the camera lens at the sun. Sunlight will converge in the lens and focus inside the camera, possibly causing a malfunction or fire.
Micro Four Thirds and the Micro Four Thirds logo are trademarks or registered trademarks of OLYMPUS CORPORATION.

FCC NOTE

For customers in North America, Central America, South America and the Caribbean FCC Notice

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate.
This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B)

Technical Support (U.S.A. / Canada)

24/7 online automated help :
http://www.olympusamerica.com/support
Phone customer support : Tel. 1-800-260-1625 (Toll-free)
Our phone customer support is available from 9 am to 9 pm (Monday to Friday) ET
E-Mail : distec@olympus.com

For customers in Europe

The “CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. CE-mark products are for sale in Europe.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product.

European Technical Customer Support
Please visit our homepage http://www.olympus-europa.com or call: Tel. 00800 – 67 10 83 00 (Toll-free) +49 40 – 237 73 899 (Charged)