PANDUIT FHSZA-24-10P HD Flex 12 Port Splice Cassette Instruction Manual

: June 13, 2024
: PANDUIT

Table of Contents

FHSZA-24-10P HD Flex 12 Port Splice Cassette
INSTALLATION INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HD Flex 12 Port Splice Cassette
Part Number(s): See Table 1

FHSZA-24-10P HD Flex 12 Port Splice Cassette

© Panduit Corp. 2023
INSTALLATION INSTRUCTIONS
FS165A

For complete HD Flex Fiber Cassette Enclosure installation instructions, visit www.panduit.com and search FS111.
Table 1:

Product Family	Cassette part number	Cassette Description

24-Fiber LC Splice Cassette
(pre-loaded with discrete
pigtails)| FHSZA-24-10P| 24-Fiber OM4 LC, Discrete Pigtails, Ultra IL
FHS9N-24-10P| 24-Fiber OS2 LC, Discrete Pigtails, Standard IL
FHS9N-24-LAP| 24-Fiber OS2 LC/APC, Discrete Pigtails, Standard IL
24 Fiber LC Splice Cassette
(pre-loaded with ribbon
pigtails)| FHSZA-24-10R| 24-Fiber OM4 LC, Ribbon Pigtails, Ultra IL
FHS9N-24-10R| 24-Fiber OS2 LC, Ribbon Pigtails, Standard IL
FHS9N-24-LAR| 24-Fiber OS2 LC/APC, Ribbon Pigtails, Standard, IL
12 Fiber SC Splice Cassette
(pre-loaded with discrete
pigtails)| FHSZA-12-03P| 12-Fiber OM4 SC, Discrete Pigtails, Ultra IL
FHS9N-12-03P| 12-Fiber OS2 SC, Discrete Pigtails, Standard IL
FHS9N-12-3AP| 12-Fiber OS2 SC/APC, Discrete Pigtails, Standard, IL
12-Fiber SC Splice Cassette
(pre-loaded with ribbon
pigtails)| FHSZA-12-03R| 12-Fiber OM4 SC, Ribbon Pigtails, Ultra IL
FHS9N-12-03R| 12-Fiber OS2 SC, Ribbon Pigtails, Standard IL
FHS9N-12-3AR| 12-Fiber OS2 SC/APC, Ribbon Pigtails, Standard IL
Splice Only Cassette| FHSN-24| Splice Only Cassette, No Front Connectivity

WARNING: UNMATED CONNECTORS MAY EMIT INVISIBLE LASER RADIATION.
MAIN-TAIN DUST CAPS ON UNMATED CONNECTORS.
CAUTION: Fiber optic cable is sensitive to excess pulling, bending, and crushing forces.
Consult the manufacturer’s cable specifications sheet for specific cable to use.
For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Contents
24 Splice LC Splice Cassette pre-loaded with discrete pigtails

(24) 40mm Discrete Split Sleeves
(4) Pan-TyTM Cable Ties

24 Fiber LC Splice Cassette pre-loaded with ribbon pigtails

(24) 40mm Ribbon Splice Sleeves
(4) Pan-TyTM Cable Ties

12 Fiber SC Splice Cassette pre-loaded with discrete pigtails

(12) 40mm Discrete Splice Sleeves
(4) Pan-TyTM Cable Ties

12 Fiber SC Splice Cassette pre-loaded with ribbon pigtails

(1) 40mm Ribbon Splice Sleeve
(4) Pan-TyTM Cable Ties

Splice Only Cassette

(24) 40mm Discrete Spice Sleeves
(4) 40mm Discrete Splice Sleeves
(8) Pan-TyTM Cable TIes

Additional splice protectors available from PANDUIT:

FOSP40-C: Single Fiber Splice Protectors (100 pcs)
FOSPR40-L: Ribbon Fiber Splice Protectors (50 pcs)

PANDUIT FHSZA-24-10P HD Flex 12 Port Splice Cassette - Figure
1 Remove the cover, by pressing down on the cover removal latch, then sliding the cover back, in the direction of the arrow.Note the location of the internal components. The splice only cassettes are not supplied with pre-loaded pigtails nor connector adapters. PANDUIT FHSZA-24-10P HD Flex 12 Port Splice
Cassette - Figure 3 Strip incoming field outer cable jacket 20 inches, Secure with Pan-TyTM Cable Ties, and Aramid Yarn with screw (optional).
Max cable diameter: 7.4mm
Expose all fiber ends for splicing. Slide a splice sleeve onto either the (pigtail or field) fiber. Splice all fibers and heat splice sleeve(s). Refer to splicer manufacturer best practice instructions.
Refer to the following figures to route spliced fibers into cassettes ensuring fibers are located under the routing tabs. Secure splice sleeves in splice sleeve holders. Up to two splice sleeves can be stacked under each splice sleeve holder PANDUIT FHSZA-24-10P HD Flex 12 Port Splice Cassette - Figure
4 Figure 4 : 24 Fiber LC Splice Cassette with discrete pigtails Figure 5 : 24 Fiber LC Splice Cassette with ribbon pigtails Figure 6: 12 Fiber SC Splice Cassette with discrete pigtails
Figure 7: 12 Fiber SC Splice Cassette with ribbon pigtails PANDUIT FHSZA-24-10P HD Flex 12 Port Splice
Cassette - Figure 8 Figure 8: Discrete fiber in splice only cassette Figure 9: Ribbon Fiber in splice only cassetteRe-install cover by sliding it forward onto the base. PANDUIT
FHSZA-24-10P HD Flex 12 Port Splice Cassette - Figure 11 Splice only cassettes provide label targets. Each label can accommodate labels up to 3.25″ long and 0.35″ tall.