CHAUVET PROFESSIONAL REM 3IP Bright 4500 NITS Indoor or Outdoor Hybrid Video Wall Solution User Guide
- June 12, 2024
- Chauvet Professional
Table of Contents
CHAUVET PROFESSIONAL REM 3IP Bright 4500 NITS Indoor or Outdoor Hybrid
Video Wall Solution
Product Information
The REM 3IP and REM 3IPSQ are electronic devices that come with a user manual and a quick reference guide. The devices comply with Part 15 Part B of the FCC rules and have a model ID of REM3IP and REM3IPSQ. The product package includes an AC power cord, AC plug, connection wire for the US and Europe, and a screw color set with AC Live, AC Neutral, and AC Ground wires in Black/White/Green- Yellow, Brown/Blue/Green-Yellow, and Yellow-Brass/Silver/Green colors. The device can be power linked using power-linking cables, which can be purchased separately. The device has M10 threaded mounting holes for mounting purposes.
Product Usage Instructions
- Scan the QR code to access the product page, warranty terms, and the complete User Manual.
- Read the Safety Notes before installing, using, or maintaining the device.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- Never exceed 12 A on a single circuit while power linking. Use power-linking cables that can be purchased separately.
- Use rig bars (REM-RB50CMIP or REM-RB100CMIP) from Chauvet, or the M10 threaded mounting holes on the product for mounting purposes. Make sure the mounting devices are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.
- Refer to the table provided in the quick reference guide for current draw at each voltage and frequency for REM3IP and REM3IPSQ products.
Scan the QR code to access the product page, warranty terms, and the complete User Manual
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the REM 3IP and REM 3IPSQ .
- CAUTION:
- This product’s housing may be hot when operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow the product to fully acclimate to the surrounding environment before connecting it to power.
- ALWAYS:
- Use a safety cable when mounting this product overhead.
- Connect this product to a grounded and protected circuit.
- DO NOT:
- Open this product. It contains no user-serviceable parts.
- Leave any flammable material within 50 cm of this product while operating or connected to power.
- Connect this product to a dimmer or rheostat.
- Operate this product if the housing, lenses, or cables appear damaged.
- Submerge this product (IP65). Regular outdoor operation is fine.
- ONLY use the hanging/mounting bracket to carry this product.
- The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- In the event of a serious operating problem, stop using immediately.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
What is Included
REM3IP
- 1 case (REM3IP X4)
- 1 Seetronic® PowerKON® power cable
- 4 Seetronic® PowerKON® power linking cables
- 4 Seetronic® etherKON® signal linking cables
- 5 spare LED masks
- User manual
REM3IPSQ
- 1 case (REM3IPSQ X8)
- 1 Seetronic® PowerKON® power cable
- 8 Seetronic® PowerKON® power linking cables
- 8 Seetronic® etherKON® signal linking cables
- 5 spare LED masks
- User manual
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
| Connection | Wire (U.S.) | Wire (Europe) | Screw Color |
|---|---|---|---|
| AC Live | Black | Brown | Yellow/Brass |
| AC Neutral | White | Blue | Silver |
| AC Ground | Green/Yellow | Green/Yellow | Green |
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Power Linking
It is possible to power link REM 3IP and REM 3IPSQ products. See the table below for the current draw at each voltage and frequency:
REM3IP
| 100 V, 60 Hz| 120 V, 60 Hz| 208 V, 60 Hz| 230 V, 50 Hz|
240 V, 50 Hz
---|---|---|---|---|---
Current Draw| 3.0 A| 2.5 A| 1.44 A| 1.3 A| 1.25 A
REM3IPSQ
| 100 V, 60 Hz| 120 V, 60 Hz| 208 V, 60 Hz| 230 V, 50 Hz|
240 V, 50 Hz
---|---|---|---|---|---
Current Draw| 1.5 A| 1.25 A| 0.72 A| 0.65 A| 0.63 A
Never exceed 12 A on a single circuit. Power-linking cables can be purchased separately.
Mounting
Before mounting this product, read the Safety Notes. Use rig bars (REM- RB50CMIP or REM-RB100CMIP) from Chauvet, or the M10 threaded mounting holes on the product. Make sure the mounting devices are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.
Mounting Diagram
- Warning: The magnetic attachments are not load-bearing, and are intended for alignment assistance only. Do not release panel until the hanging hardware has been fully secured.
- The M10 mounting points are not intended for hanging or suspending from a truss or other overhead structure.
Contact Us
General Information
Chauvet World Headquarters
Address: 3360 Davie Rd. Davie, FL 33314
Voice: 954-577-4455
Fax: 954-929-5560
Toll Free: 800-762-1084
Technical Support
Voice: 844-393-7575
Fax: 954-756-8015
Email: chauvetcs@chauvetlighting.com
Website: www.chauvetprofessional.com
Chauvet U.K.
Address: Pod 1 EVO Park Little Oak Drive, Sherwood Park Nottinghamshire, NG15
0EB UK
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110
Technical Support
Email: UKtech@chauvetlighting.eu
Website: www.chauvetprofessional.eu
Chauvet Benelux
Address: Stokstraat 18 9770 Kruishoutem Belgium
Voice: +32 9 388 93 97
Technical Support
Email: BNLtech@chauvetlighting.eu
Website: www.chauvetprofessional.eu
Chauvet France
Address: 3, Rue Ampère 91380 Chilly-Mazarin
France
Voice: +33 1 78 85 33 59
Technical Support
Email: FRtech@chauvetlighting.fr
Website: www.chauvetprofessional.eu
Chauvet Germany
Address: Bruno-Bürgel-Str. 11 28759 Bremen
Germany
Voice: +49 421 62 60 20
Technical Support
Email: DEtech@chauvetlighting.de
Website: www.chauvetprofessional.eu
Chauvet Mexico
Address: Av. de las Partidas 34 – 3B (Entrance by Calle 2)
Zona Industrial Lerma
Lerma, Edo. de México, CP 52000
Voice: +52 728-690-2010
Technical Support
Email: servicio@chauvet.com.mx
Website: www.chauvetprofessional.mx
Visit the applicable website above to verify our contact information and
instructions to request support. Outside the U.S., U. K., Ireland, Mexico,
France, Germany, or Benelux, contact the dealer of record.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>