BOSCH WAN28292BY Washing Machine User Manual

WAN28292BY Washing Machine

Product Information

Product Name: Washing machine
Model: WAN28292BY
User manual and installation instructions available in English.
For further information and explanations, refer to the online resources.

Product Usage Instructions

Safety:

• Read the general information and intended use carefully.
• Take note of any restrictions on the user group.
• Follow safe installation guidelines.
• Ensure safe use of the appliance.
• Refer to the manual for safe cleaning and maintenance.

  ---

Preventing Material Damage:
Take necessary precautions to prevent material damage.

Environmental Protection and Saving Energy:

• Dispose of packaging responsibly.
• Follow energy-saving practices to conserve resources.
• Utilize the energy-saving mode when available.

  ---

Installation and Connection

• Unpack the appliance carefully.
• Check the contents of the package.
• Ensure the installation location meets the requirements.
• Remove the transit bolts before connecting the appliance.
• Connect the appliance properly.
• Align the appliance correctly.

  ---

Familiarizing Yourself with Your Appliance:

• Understand the different parts of the appliance.
• Learn about the detergent drawer and control panel.

  ---

**Before Using for the First Time

**

Start an empty washing cycle to prepare the appliance for use.

Display:
Learn about the display features and functions.

Buttons:
Understand the different buttons and their functions.

Programmes:
Familiarize yourself with the available programmes.

Accessories:
Learn about the accessories that can be used with the appliance.

Laundry:
Prepare the laundry before loading it into the appliance.

Detergents and Care Products:
Understand the types of detergents and care products to use.

Basic Operation

• Switch on the appliance.
• Set a programme.
• Adjust programme settings if required.
• Load the laundry.
• Use the measuring aid for liquid detergent if necessary.
• Add detergent and care products.
• Start the programme.
• Make changes to the activated programme end time if needed.
• Add laundry during the programme if allowed.
• Cancel or resume a programme as required.
• Unload the laundry once the programme is completed.
• Switch off the appliance when not in use.

  ---

Childproof Lock:
Activate or deactivate the childproof lock as needed.

Basic Settings:

• Overview of the available basic settings.
• Change the basic settings as required. Please refer to the complete user manual for detailed instructions and additional information.

bMogesyncRtBwehfeorwe-egshlecidcoshoebmtevmneeirnoce.eweycfoooiatumnsnr:d/

Washing machine

WAN28292BY

[en]

User manual and installation instructions

en
Further information and explanations are available online:

Safety

Observe the following safety instructions. 1.1General information
¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe
for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2Intended use Only use this appliance: ¡ For washing machine-washable fabrics and hand-washable wool
in accordance with the care label. ¡ With tap water and commercially available detergents and care
products suitable for washing machines. ¡ in private households and in enclosed spaces in a domestic en-
vironment. ¡ up to an altitude of max. 4000 m above sea level. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Cleaning and user maintenance must not be performed by children unless they are being supervised. Keep children under the age of 3 years and pets away from the appliance.
4

Safetyen
1.4Safe installation WARNING Risk of electric shock!
Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the
specifications on the rating plate. Connect the appliance to a power supply with alternating cur-
rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in-
stallation must be properly installed. The installation must have a sufficiently large cross section. When using a residual current circuit breaker, only use a type with the mark. Never equip the appliance with an external switching device, e.g. a timer or remote control. When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. Never let the power cord come into contact with sharp points or edges. Never kink, crush or modify the power cord.
WARNING Risk of fire! It is dangerous to use an extended power cord and non- approved adapters. Do not use extension cables or multiple socket strips. Only use adapters and power cords approved by the manufac-
turer. If the power cord is too short and a longer one is not available,
please contact an electrician to have the domestic installation adapted.
5

enSafety
WARNING Risk of injury! The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. Only stack the dryer on a washing machine using the connec-
tion kit from the dryer manufacturer . No other installation method is permitted. Do not install the appliance in a washer-dryer stack if the dryer manufacturer does not offer a suitable connection kit. Do not install appliances from different manufacturers and with varying depths and widths in a washer-dryer stack. Do not install a washer-dryer stack on a platform; the appliances may tip over.
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children. Do not let children play with packaging material.
CAUTION Risk of injury! The appliance may vibrate or move when in use. Place the appliance on a clean, even, solid surface. Align the appliance using the appliance feet and a spirit level. If hoses and power cords have been laid incorrectly, this causes a tripping hazard. Lay hoses and power cords in such a way that there is no risk
of tripping. If the appliance is moved by holding onto protruding components, such as the appliance door, the parts may break off. Do not move the appliance by holding onto protruding parts.
CAUTION Risk of cutting! Touching sharp edges on the appliance may lead to cuts. Do not touch the sharp edges on the appliance.
6

Safetyen
Wear protective gloves when installing and transporting the appliance.
1.5Safe use WARNING Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. Never pull on the power cord to unplug the appliance. Always
unplug the appliance at the mains. If the appliance or the power cord is damaged, immediately un-
plug the power cord or switch off the fuse in the fuse box and turn off the water tap. Call customer services. Page 49 An ingress of moisture can cause an electric shock. Only use the appliance in enclosed spaces. Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. Do not install the appliance behind a door as this may obstruct
the appliance door or prevent it from opening. With redundant appliances, unplug the power cord. Then cut
through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
WARNING Risk of suffocation! Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.
7

enSafety
WARNING Risk of poisoning! Detergents and care products may result in poisoning if consumed. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children.
WARNING Risk of explosion! Laundry that has been pretreated with cleaning agents that contain solvents may cause an explosion in the appliance. Rinse pretreated laundry thoroughly with water before washing.
CAUTION Risk of injury! The covering plate may break if you stand on or climb onto the appliance. Do not stand on or climb onto the appliance. The appliance may tip over if you sit on or lean against the open door. Do not sit on or lean against the appliance door. Do not place any objects on the appliance door. Reaching into the drum while it is still turning may cause hand injuries. Wait for the drum to come to a complete stop before reaching
inside. CAUTION Risk of scalding!
When you wash at high temperatures, the detergent solution gets hot. Do not touch the hot detergent solution.
CAUTION Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. Rinse eyes and/or skin thoroughly with clean water if they come
into contact with detergents or care products. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children.
8

Safetyen
1.6Safe cleaning and maintenance WARNING Risk of electric shock!
Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained
specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be re-
placed by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk. An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. Only use the manufacturer’s original spare parts and original ac-
cessories. WARNING Risk of poisoning!
Poisonous fumes may be given off if you use cleaning agents that contain solvents. Do not use cleaning agents that contain solvents.
9

enPreventing material damage
2Preventing material damage
ATTENTION! The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, detergent, care product or cleaning agent. Follow the dosage recommenda-
tions from the manufacturer. Exceeding the maximum load capacity impairs the function of the appliance. Observe the maximum load capa-
city for each programme and do not exceed it. “Programmes”, Page 23 The appliance is secured for transportation using transit bolts. Transit bolts which have not been removed may result in material damage and damage to the appliance. Before starting up the appliance, remove the transit bolts completely and keep them in a safe place. Before transport, fit the transit bolts fully in order to prevent damage in transit. Material damage may be caused if the water inlet hose is connected incorrectly. Tighten the screw connections on the water inlet until they are handtight. Connect the water inlet hose directly to the water tap, without any additional connecting elements such as adapters, extensions or valves. Make sure that the valve housing for the water inlet hose does not come into contact with its surroundings and is not subjected to any external forces. Ensure that the inner diameter of the water tap is at least 17 mm. 10

Make sure that the length of the thread on the connection to the water tap is at least 10 mm.
If the water pressure is too high or too low, the appliance may not be able to operate properly. Ensure that the water pressure in
the water supply system is at least 100 kPa (1 bar) and max. 1000 kPa (10 bar). If the water pressure exceeds the maximum value specified, a pressure- reducing valve must be installed between the drinking water connection and the hose set of the appliance. Do not connect the appliance to the mixer tap of an unpressurised hot-water boiler. Modified or damaged water hoses may result in material damage and damage to the appliance. Never kink, crush, modify or cut through water hoses. Only use the water hoses supplied with the appliance or genuine spare hoses. Never re-use water hoses that have been used before. Operating the appliance using water that is dirty or too hot may lead to material damage and damage to the appliance. Only operate the appliance with cold mains water. Unsuitable cleaning products may damage the surfaces of the appliance. Do not use harsh or abrasive detergents. Do not use cleaning products with a high alcohol content. Do not use hard scouring pads or cleaning sponges. Clean the appliance with nothing but water and a soft, damp cloth.

Environmental protection and saving energyen

Remove all detergent residue, spray residue or other residues immediately if they come into contact with the appliance.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by
type and dispose of them separately.
3.2Save energy and conserve resources
If you follow these instructions, your appliance will use less electricity and less water.

Set the maximum spin speed if you want to dry the laundry in the tumble dryer afterwards. a The drier the laundry, the shorter
the programme duration when drying which, in turn, reduces energy consumption. A higher spin speed reduces the residual moisture in the laundry and increases the volume of the spin noise.
Wash the laundry without prewash. a Washing with prewash increases
the programme duration and increases energy and water consumption.
The appliance has a continuous automatic load adjustment function. a Depending on the type of fabric
and load capacity, the continuous automatic load adjustment function optimally adjusts the water consumption and programme duration.

Choose programmes with low temperatures and longer wash times and use maximum load capacity. a Energy consumption and water
consumption is most efficient.
Add detergent based on the laundry’s degree of soiling. a For light to normal soiling, a smal-
ler amount of detergent is sufficient. Observe the dosage recommendation from the detergent manufacturer.

3.3Energy saving mode
If you do not use the appliance for an extended period, it automatically switches to energy-saving mode. Energy-saving mode ends when you use the appliance again.

Reduce the washing temperature for lightly and normally soiled laundry. a At lower temperatures, the appli-
ance consumes less energy. For light to normal soiling, lower temperatures than indicated on the care label are also sufficient.

11

enInstallation and connection

Installation and connection

Unpacking the appliance
ATTENTION! Objects remaining in the drum that are not designed for operation with the appliance may cause material damage and damage to the appliance. Remove these objects, along with
all supplied accessories, from the drum before starting the appliance. 1. Remove any packaging and protective covers completely from the appliance. “Disposing of packaging”, Page 11 2. Check the appliance for visible damage. 3. Open the door. 4. Remove any accessories from the drum. 5. Close the door.
4.2Contents of package
After unpacking all parts, check for any damage in transit and completeness of the delivery. ATTENTION! If the appliance is operated with incomplete or defective accessories, the appliance may not be able to operate properly, or this may result in material damage or damage to the appliance. Do not operate the appliance with
incomplete or defective accessories.
12

Replace the accessories in question before operating the appliance. “Accessories”, Page 27
Note: The appliance has been tested at the factory to check it is in working order. As a result, water stains may remain in the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: ¡ Washing machine ¡ Accompanying documents ¡ Transit bolts
“Removing the transit bolts”, Page 13 ¡ Cover caps ¡ Elbow for securing the water outlet hose
4.3Requirements for the installation location
WARNING Risk of electric shock! The appliance contains live parts. Touching live parts is dangerous. Do not operate the appliance
without a cover cap.
WARNING Risk of injury! When using the appliance on a base, the appliance may tip over. Always secure the feet of the appli-
ance to a base using the manufacturer’s fixing brackets Page 27 before using the appliance for the first time. ATTENTION! If residual water in the appliance freezes, this may cause damage to the appliance. Do not install or operate this appliance anywhere that is liable to experience frost or outdoors.

If the appliance is tilted at an angle greater than 40°, residual water may leak out of the appliance and cause material damage. Tilt the appliance carefully. Transport the appliance in an up-
right position.

Installation loca- Requirements tion

Base

Secure the appliance with fixing brackets Page 27.

Installation and connectionen
4.4Removing the transit bolts
The appliance is secured for transportation using transit bolts on the rear of the appliance. Note: Keep the transit bolt screws and the sleeves in a safe place for future transport. “Inserting the transit bolts”, Page 48 1. Pull the hoses out of the holders.

Wooden joist floor Kitchen unit Against a wall

Place the appliance on a waterresistant wooden board (minimum thickness of 30 mm) which is screwed tightly to the floor. Only install the appliance underneath a continuous worktop that is securely connected to adjacent cabinets. Required niche width: 60 cm. Do not trap the power cord or the hoses between the wall and the appliance.

2. Unscrew and remove all of the screws for the 4 transit bolts using a WAF 13 wrench.

13

enInstallation and connection 3. Remove the power cable from the
holder.

6. Push the 4 cover caps downwards.

4. Remove the 4 sleeves. 5. Put on the 4 cover caps.

Note: To install the transit bolts to transport the appliance, perform these steps again in the reverse order.
4.5Connecting the appliance
Connecting the water inlet hose
WARNING Risk of electric shock! The appliance contains live parts. Touching live parts is dangerous. Do not immerse the electrical
AquaStop valve in water. 1. Connect the water inlet hose to a
tap (26.4 mm = 3/4″).

2. Open the water tap carefully and check that the connection points are tight.
14

Water outlet connection types This information is intended to help you to connect this appliance to the water outlet.

ATTENTION! When draining, the water outlet hose is subject to water pressure and may come loose from the installed connection point. Secure the water outlet hose
against unintentional loosening.

Note: Observe the draining heights. The maximum draining height is 100 cm.

Siphon

Secure the connection point with a (24­40 mm) hose clamp.

Installation and connectionen
safety regulations, and should include a residual current circuitbreaker. 1. Insert the mains plug of the appli-
ance’s power cable in a socket nearby. The connection details of the appliance can be found under Technical data Page 51. 2. Check the mains plug is inserted properly.
4.6Aligning the appliance
In order to reduce noise and vibration and to prevent the appliance from moving, align the appliance correctly. 1. Use a WAF 17 wrench to loosen
the lock nuts in a clockwise direction.

Sink

Fix and secure

the water outlet

hose with an el-

bow

Page 27.

Plastic pipe with rubber sleeve or gully

Fix and secure the water outlet hose with an elbow Page 27.

Connecting the appliance to the electricity supply Note: Your electrical domestic installation for this appliance must comply with the local legal provisions and
15

enInstallation and connection 2. To align the appliance, turn the ap-
pliance feet. Check that the appliance is level using a spirit level. All appliance feet must stand firmly on the ground. 3. Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight. In doing so, hold the foot tight and do not adjust its height.
16

Familiarising yourself with your applianceen
5Familiarising yourself with your appliance
5.1Appliance
You can find an overview of the parts of your appliance here.

3

4

56

2

7

7

1

8

On certain models, specific details such as the colour and shape may differ from those pictured.

1

Maintenance flap for the drain pump Page 34

2 Door

3 Detergent drawer Page 17

4 Control panel Page 18

5 Water outlet hose Page 15

6 Power cord Page 15

7 Transit bolts Page 13

8 Water inlet hose Page 14
5.2Detergent drawer
Note: Observe the manufacturer’s instructions on the use and dosage of the detergent and care product and the information in the programme descriptions. “Programmes”, Page 23

17

enFamiliarising yourself with your appliance
1

12

4

3

2

3

4

Measuring aid for liquid detergent “Inserting the measuring aid for liquid detergent”, Page 28 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash

5.3Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

2

3

1

1

4

1 Programmes Page 23

2

Programme selector Page 28

3 Display Page 20

4 Buttons Page 22

18

6Before firsttime using for the first time
Prepare firsttime the appliance for use.
6.1Starting an empty washing cycle
Your appliance was inspected thoroughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. 1. Turn the programme selector to
Drum Clean. 2. Close the door. 3. Pull out the detergent drawer. 4. Pour approx. 1 litre of tap water
into compartment II.

first timeen 5. Add washing powder that contains
a bleaching agent to compartment II.
To prevent foaming, use only half of the amount of detergent recommended by the detergent manufacturer for light soiling. Do not use detergent suitable for woollens or delicates. 6. Push in the detergent drawer. 7. Press Start / Reload to start the programme. a The display shows the remaining programme duration. a After the programme has ended, the display shows: End. 8. Start the first wash cycle or set the programme selector to Off to switch off the appliance. “Basic operation”, Page 28

19

enDisplay

7Display

The display shows the current settings, options or relevant information. Example: Display

Display 0:40 1 10 1 8.0 1 ­ ­­ – 1400
– 90
1 Example

Description Expected programme duration or programme time remaining in hours and minutes. Program end time “Buttons”, Page 22 Recommendation for the maximum load capacity for the selected program in kg. Set spin speed in rpm. “Buttons”, Page 22 ­ 0 ­: No final spin, only draining ­ ­­: Rinse Hold, no draining Set temperature in °C. “Buttons”, Page 22
(cold) Start, cancel or pause ¡ Lights up: The programme is running and can be can-
celled or paused. ¡ Flashes: The programme can be started or continued.
¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli-
ance has been operated. “Deactivating the childproof lock”, Page 31 Prewash is activated. “Buttons”, Page 22 Washing with additional water and a rinse cycle is activated. “Buttons”, Page 22 Shortened programme length is activated. “Buttons”, Page 22 Flashes: Drum is dirty. Run the Drum Clean programme for cleaning and caring for the drum and the outer tub. “Cleaning the drum”, Page 33 Lights up: The voltage control system has paused the program due to impermissible voltage drops. The voltage is permissible again and the programme continues. Note: The programme duration is extended.

20

Display
E:35 / -101 1 Example

Displayen
Description Flashes: The voltage control system has paused the programme due to impermissible voltage drops. Note: The programme continues when the voltage is permissible again. ¡ Lights up: The door is locked and cannot be opened. ¡ Flashes: The door is not closed properly. ¡ Off: The door is unlocked and can be opened. ¡ No water pressure. ¡ The water pressure from the tap is too low. Error code, error display, signal. “Troubleshooting”, Page 38

21

enButtons

8Buttons

The selection of programme settings depends on the programme that is set.

Button Start / Reload
Speed Perfect

Selection ¡ Start ¡ Cancel ¡ Pause
¡ Activate ¡ Deactivate

Finished in

Up to 24 hours

Temp. Spin

– 90 ­ ­­ – 1400

3 sec.

¡ Activate ¡ Deactivate

Prewash

¡ Activate ¡ Deactivate

Water/Extra Rinse ¡ Activate

¡ Deactivate

More information Start, cancel or pause the programme.
Activate or deactivate a shorter programme duration. Note: Energy consumption increases. The washing result is not affected by this. Set the programme end time. The programme duration is already included in the set number of hours. Once the programme has started, the programme duration is displayed. Adjust the temperature. Set temperature in °C. Adjust the spin speed or activate ­ ­­ (Rinse Hold). Set spin speed in rpm. If ­ ­­ is selected, the water is not drained at the end of the washing cycle and the spin cycle is deactivated. The laundry remains in the rinsing water. “Childproof lock”, Page 31
Activate or deactivate prewash, e.g. for washing heavily soiled laundry. Activate or deactivate a washing programme with more water and an additional rinse cycle. Recommended for particularly sensitive skin or in regions with very soft water.

22

Programmesen

9Programmes

Note: The laundry’s care labels provide you with additional information on programme selection.

Programme

Description

Max. load (kg)

Cottons

Wash hard-wearing items made from cotton, linen 8.0

or blended fabrics.

5.01

Also suitable as a short programme for normally

soiled laundry when you activate Speed Perfect

.

Programme setting:

¡ Max. 90 °C

¡ Max. 1400 rpm

Eco 40-60

Wash items made from cotton, linen or blended

8.0

fabrics.

Note: Fabrics which can be washed from 40 °C up to 60 °C as per the care symbol can be washed together. The washing performance corresponds to the best possible washing performance class according to the legal requirements. For this programme, the washing temperature is automatically adjusted depending on the load size, in order to achieve the best possible energy efficiency with the best possible washing result. You cannot change the washing temperature.

Programme setting:

Note: The temperature cannot be adjusted in this programme and is set automatically.

¡ Max. – °C

¡ Max. 1400 rpm

Easy Care

Wash items made from synthetic or blended fab- 4.0 rics. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm

Quick/Mix Wash items made from cotton, linen, or synthetic or 4.0 blended fabrics. Suitable for lightly soiled laundry.

1 Speed Perfect activated 2 Washing not possible

23

enProgrammes

Programme

Description

Max. load (kg)

Programme setting: ¡ Max. 60 °C ¡ Max. 1400 rpm

Delicates/Silk

Wash delicate, washable items made from silk, vis- 2.0 cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm

Wool

Hand- or machine-washable items that are made 2.0 from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses. Use a detergent that is suitable for wool. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm

Rinse

Rinse and then spin the laundry, and drain the wa- ­ ter. Programme setting: Max. 1400 rpm

Spin/Drain / Spin and drain the water.

­

If you only want to drain the water, activate ­ 0 ­.

The laundry is not spun.

Programme setting: Max. 1400 rpm

Hygiene Plus Wash hard-wearing items made from cotton, linen 6.5 or blended fabrics. Suitable for allergy sufferers and for strict hygiene requirements. Note: Once the set temperature has been reached, it remains constant throughout the entire washing process. Programme setting: ¡ Max. 60 °C ¡ Max. 1400 rpm

1 Speed Perfect activated 2 Washing not possible

24

Programmesen

Programme

Description

Max. load (kg)

Shirts/ Blouses

Wash non-iron shirts and blouses made from cot- 2.0 ton, linen, or synthetic or blended fabrics. Note: Use the Delicates/Silk programme to wash shirts and blouses made from silk or delicate fabrics. Programme setting: ¡ Max. 60 °C ¡ Max. 800 rpm

Functional Wash all-weather and outdoor clothing with mem- 2.0

Textiles

brane technology and water-resistant equipment.

Use a detergent for outdoor fabrics.

Do not use fabric softener.

Programme setting:

¡ Max. 40 °C

¡ Max. 800 rpm

Down

Wash pillows, duvets or clothing stuffed with down 2.0 and fillings with synthetic fibres. Wash large items separately. Use a detergent that is suitable for down or delicates. Use sparingly. Do not use fabric softener. Note: To prevent excessive foaming, remove air from laundry items by rolling them up before you wash them. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm

Jeans/Dark Wash

Wash dark-coloured and colour-intense items made 4.0 from cotton or easy-care fabric, e.g. jeans. Turn laundry inside-out before washing. Use liquid detergent. Programme setting: ¡ Max. 40 °C ¡ Max. 1200 rpm

Drum Clean

Clean and care for the drum.

­2

Use this programme in the following cases:

¡ Before using the appliance for the first time

¡ If you regularly wash at temperatures of 40 °C or

lower

1 Speed Perfect activated 2 Washing not possible

25

enProgrammes

Programme

Description

Max. load (kg)

¡ After a prolonged period of non-use

Use washing powder that contains bleach. Add the washing powder containing bleach to compartment II for the main wash. “Detergent drawer”, Page 17 Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use liquid detergent or detergent that is intended for woollens or delicates. Note: The drum cleaning indicator flashes to remind you if you have not used a programme at 60 °C or higher for a long time.

Super Quick 15’/30′ /

Wash items made from cotton, or synthetic or blen- 4.0

ded fabrics.

2.01

Short programme for small items of lightly soiled

laundry.

The programme duration is approx. 30 minutes.

If you wish to reduce the programme duration to 15

minutes, activate Speed Perfect . The maximum

load is reduced to 2.0 kg.

Programme setting:

¡ Max. 40 °C

¡ Max. 1200 rpm

1 Speed Perfect activated 2 Washing not possible

26

Accessoriesen

10Accessories

Use original accessories. These have been made especially for your appliance. Note: Some accessories are available in other colours. Contact “Customer Service”, Page 49.

Water inlet hose extension Fixing brackets Elbow Liquid detergent insert Platform
Washing machine cleaners

Use
Extend the water inlet hose for cold water or AquaStop (approx. 2.50 m). Improves the stability of the appliance. Secure the water outlet hose in place. Measure liquid detergent.

Order number WMZ2381
WMZ2200 00655300 00605740

Install the appliance at a raised height so WMZ20490 that it can be easily loaded and unloaded. Cleaning products for maintaining the ap- 00311929 pliance interior.

11Laundry
11.1Preparing the laundry
ATTENTION! Objects remaining in the laundry may damage the laundry and the drum. Remove all items from any pock-
ets in your laundry before using the appliance. Note The appliance and fabrics are protected when you prepare your laundry. ¡ Brush off sand and soil ¡ Sort the laundry according to colour and textiles and observe the care labels ¡ Close all zips, Velcro fasteners, hooks and eyes

¡ Tie cloth belts, cloth straps and cords together
¡ Remove curtain fittings and lead strips
¡ Wash small or particularly delicate items in a mesh washing bag
¡ Wash large and small items of laundry together
¡ Wash laundry with fresh stains immediately
¡ Pretreat laundry with dried stains and wash several times
¡ Load the laundry unfolded into the drum

27

enDetergents and care products
12Detergents and care products
The manufacturer’s instructions for use and dosage can be found on the packaging. Notes ¡ When using liquid detergents, only
use liquid detergents that are selfflowing ¡ Do not mix different liquid detergents ¡ Do not mix detergent and fabric softener ¡ Do not use products that have expired or are highly congealed ¡ do not use products containing solvents, caustic agents or volatile substances ¡ Use dyes sparingly as salt may damage stainless steel ¡ Do not use color-bleaching agents in the appliance
13Basic operation operation
operation
13.1Switching on the appliance
Requirement: The appliance has been correctly installed and connected. “Installation and connection”, Page 12 Turn the programme selector to a
programme.
13.2Setting a programme
1. Turn the programme selector and set the required programme. “Programmes”, Page 23

2. If required, adjust the programme settings. “Adjusting the programme settings”, Page 28
13.3Adjusting the programme settings
Requirement: A programme has been set. “Setting a programme”, Page 28 Adjust the programme settings.
“Buttons”, Page 22 Note: The programme settings are not saved permanently for the programme.
13.4Loading laundry
Note: To prevent creasing, note the maximum load for the programmes. “Programmes”, Page 23 Requirements ¡ The laundry is prepared and sor-
ted. “Laundry”, Page 27 ¡ The drum is empty. 1. Open the door. 2. Place the laundry in the drum. 3. Close the door. Ensure that there is no laundry trapped in the door.
13.5Inserting the measuring aid for liquid detergent
If you order the measuring aid as an accessory, you must use the measuring aid. 1. Pull out the detergent drawer.

28

2. Press down on the insert and remove the detergent drawer.

operationen 2. Slide the measuring aid forwards.

3. Insert the measuring aid.

3. Fold the measuring aid down and click it into place.

4. Insert the detergent drawer.
13.6Use the measuring aid for liquid detergent
To add liquid detergent, you can use a measuring aid in the detergent drawer.

1. Pull out the detergent drawer.

4. Push in the detergent drawer.
13.7Adding detergent and care product
Notes ¡ Do not use the measuring aid for
liquid detergent for gel detergents, washing powder, or if Prewash or “Ready in” time are activated. ¡ Observe the information about detergents and care products Page 28. 1. Pull out the detergent drawer. 2. Pour in detergent. “Detergent drawer”, Page 17 3. If required, add the care product. 4. Push in the detergent drawer.

29

enoperation
13.8Starting the programme
Requirement: A programme is set. “Setting a programme”, Page 28 Press Start / Reload . a The drum rotates and load detec-
tion takes place. This can take up to 2 minutes, after which water enters the drum. a The display shows the programme duration or the programme end time. a After the programme has ended, the display shows: End.
13.9Changing the activated programme end time
You can repeatedly change the set and activated programme end time before starting the programme. Requirements ¡ The programme is set.
“Setting a programme”, Page 28 ¡ The programme end time is set
and activated. “Buttons”, Page 22 1. Press Start / Reload . The activated programme end time is paused. 2. Press Finished in until the display shows the required programme end time. 3. Press Start / Reload . The changed programme end time is activated.
13.10Adding laundry
After the programme starts, you can remove or add laundry depending on the programme status. 1. Press Start / Reload .
The appliance pauses.

Note: If you want to add laundry, follow the instructions on the display. “Display”, Page 21 2. Open the door. 3. Add or remove laundry. 4. Close the door. 5. Press Start / Reload .
13.11Cancelling the programme
1. Press Start / Reload . 2. Open the door.
The appliance door remains locked for safety reasons if the temperature and water levels are high. ­ If the temperature is high, start
the Rinse programme. ­ If the water level is high, start
the Spin programme or select a suitable programme for draining. “Programmes”, Page 23 3. Remove the laundry. “Unloading the laundry”, Page 31
13.12Resuming the programme when the programme status is Rinse Hold
Requirements ¡ Rinse Stop is activated.
“Buttons”, Page 22 ¡ The last rinse cycle of the set pro-
gramme has ended and the laundry is in the rinsing water. 1. Set the Spin programme or a programme for draining the water. “Programmes”, Page 23 2. Press Start / Reload .

30

13.13Unloading the laundry
1. Open the door. 2. Remove the laundry from the
drum.
13.14Switching off the appliance
1. Turn the programme selector to Off.
2. Wipe the rubber gasket dry and remove any foreign objects.

Childproof locken
14.2Deactivating the childproof lock
Requirement: To deactivate the childproof lock, the appliance must be switched on. Press and hold the two 3 sec.
buttons for approx. 3 seconds. a goes out in the display.

3. Leave the appliance door and detergent drawer open so that residual water can evaporate.
14Childproof lock
Secure your appliance against being operated unintentionally using the controls.
14.1Activating the childproof lock
Press and hold the two 3 sec. buttons for approx. 3 seconds.
a The display shows . a The control elements are locked. a The childproof lock remains active
even after the appliance has been switched off and in the event of a power cut.
31

enBasic settings
15Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1Overview of the basic settings

Basic setting Programme position

End signal

2

Button signal 3

Drum cleaning 4 reminder

Value
0 (off) 1 (quiet) 2 (medium) 3 (loud) 4 (very loud) 0 (off) 1 (quiet) 2 (medium) 3 (loud) 4 (very loud) On OFF

Description Set the volume of the signal at the end of the programme.
The volume of the audible signal emitted when the buttons are pressed. Activate or deactivate the reminder to clean the drum.

32

15.2Changing the basic settings
1. Set the programme selector to position 1.
2. Press Start / Reload and, at the same time, turn the programme selector to position 2.
a The display shows the current value.
3. Set the programme selector to the required position. “Overview of the basic settings”, Page 32
4. To change the value, press Finished in.
5. To save the changes, switch off the appliance.

Cleaning and servicingen
16Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
16.1Cleaning the drum
CAUTION Risk of injury! Permanently washing at low temperatures and a lack of ventilation for the appliance may damage the drum and cause injury. Regularly run a programme for
cleaning the drum or wash at temperatures of at least 60 °C. Leave the appliance to dry after every operation with the door open, and leave the detergent drawer to dry. Run the Drum Clean programme without laundry and with a cleaning agent for caring for the inside of the appliance “Accessories”, Page 27 or with washing powder that contains bleach.
16.2Cleaning the detergent drawer
1. Pull out the detergent drawer.

33

enCleaning and servicing 2. Press down on the insert and re-
move the detergent drawer.

5. Fit the insert and click it into place.

3. Pull out the insert upwards.

6. Clean the opening for the detergent drawer.

4. Clean the detergent drawer and insert with water and a brush, and then dry them.

7. Push in the detergent drawer.
16.3Cleaning the drain pump
Clean the drain pump regularly, at least once a year, as well as in the event of faults, e.g. blockages or rattling noises. Emptying the drain pump 1. Turn off the tap. 2. Switch off the appliance.
“Switching off the appliance”, Page 31 3. Disconnect the appliance’s mains plug from the power supply.

34

4. Open and remove the maintenance flap.

Cleaning and servicingen

CAUTION – Risk of scalding!

When you wash at high temperat-

ures, the detergent solution gets

hot.

Do not touch the hot detergent solution.

To allow the detergent solution to flow out into the container, remove the sealing cap.

5. Slide a sufficiently large container under the opening.

8. Firmly press on the sealing cap. 6. Take the drain hose out of the
holder. 9. Insert the drain hose into the holder.

35

enCleaning and servicing
Cleaning the drain pump Requirement: The drain pump is empty. Page 34 1. Since water may remain in the
drain pump, unscrew the pump cap carefully. The filter insert in the pump
housing may become stuck due to coarse particles of dirt. Loosen the dirt and remove the filter insert.

4. Insert the pump cap. Ensure that the parts of the pump cap are correctly assembled.

5. Screw the pump cap as far as it will go.

2. Clean the interior, the thread on the pump cap and the pump housing. The handle on the pump cap must be in a vertical position. 6. Insert and close the maintenance flap. The pump cap is comprised of two parts which can be taken apart for cleaning.
3. Ensure that the impeller in the drain pump can rotate.
36

Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run a suitable programme for draining after you have emptied the drain pump. 1. Open the water tap.

Cleaning and servicingen 2. Insert the mains plug. 3. Switch on the appliance. 4. Pour 1 litre of water into compart-
ment II. 5. Select a suitable programme for
draining. “Programmes”, Page 23

37

enTroubleshooting

17Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.

Fault The display goes out and Start / Reload flashes.
“E:30 / -80”

Cause and troubleshooting Energy-saving mode is active Press any button. a The display lights up again. Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped. The water outlet hose is connected too high. Install the water outlet hose at a maximum height of
1 metre. Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water
hose. “Connecting the appliance”, Page 14 Drain pump is blocked. “Cleaning the drain pump”, Page 34 Pump cover is not correctly assembled. Correctly assemble the pump cover. The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way into the appliance. The handle on the pump cap must be in a vertical position. Detergent dosage is too high.

38

Fault “E:30 / -80” “E:36 / -25 / -26” “E:60 / -2B” “E:30 / -10” and/or
“E:35 / -10”

Troubleshootingen
Cause and troubleshooting Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next washing cycle with the same load. Drain pump is blocked. “Cleaning the drain pump”, Page 34. The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum. Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle. The water pressure is low. No remedial action possible. The filter in the water inflow is blocked. Clean the water inflow filter. The tap is turned off. Turn on the tap. The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or jammed. Water level measurement system is defective. Note: With the error message, the appliance starts a draining process. 1. First wait approx. 5 minutes until the drain process ends. 2. To reset the error message, switch the appliance off. 3. Switch the appliance back on. 4. If the error message is displayed again, call customer service. “Customer Service”, Page 49 There is water in the base trough. Turn off the water tap. Call the after-sales service. “Customer Service”, Page 49 The appliance is leaking.
39

enTroubleshooting Fault “E:35 / -10”
flashes.
lights up. lights up.
flashes.
“E:30/-20”

Cause and troubleshooting Turn off the water tap. Call the after-sales service.
“Customer Service”, Page 49
The automatic voltage control system detects an unauthorised voltage drop. No remedial action possible. Note: If the power supply is stable, the programme continues to run as normal. Voltage under-usage may cause extension of a programme. No remedial action possible. Voltage under-usage may cause extension of a programme. No remedial action possible. The temperature is too high. Wait until the temperature has dropped. “Cancelling the programme”, Page 30 Water level is too high. Select a suitable programme for draining.
“Programmes”, Page 23
Door is not closed. Close the door. Laundry is caught in the door. Remove any trapped laundry. Drum cleaning is required. “Cleaning the drum”, Page 33 Detergent dosage is too high. Reduce the amount of detergent for the next wash-
ing cycle with the same load.
Additional water is added. Do not add any extra water to the appliance while it
is operating.
Solenoid valve defective. Call the after-sales service.
“Customer Service”, Page 49

40

Troubleshootingen

Fault All other error codes.
The appliance is not working. The programme does not start.
The door cannot be opened.

Cause and troubleshooting

Malfunction 1. Switch the appliance off and then on again. 2. If the message appears again, disconnect the appli-
ance from the power supply for at least 30 seconds by pulling out the plug or by switching off the relevant circuit breaker in the fuse box.
a If the fault was a one-off, the message disappears. 3. If the message appears again, call the after-sales
service. Please specify the exact error message when calling. “Customer Service”, Page 49

The mains plug of the power cord is not plugged in. Connect the appliance to the power supply. The circuit breaker in the fuse box has tripped. Check the circuit breaker in the fuse box.

There has been a power cut. Check whether the lighting in your room or other
appliances are working.

You have not pressed Start / Reload . Press Start / Reload .

Door is not closed. Close the door.

Childproof lock is activated. Deactivate childproof lock.
“Deactivating the childproof lock”, Page 31

Finished in is activated. Check whether Finished in
“Buttons”, Page 22

is activated.

Laundry is caught in the door. Remove any trapped laundry.

­ ­­ is activated. Continue the programme by selecting Spin or
Drain and pressing Start / Reload . “Resuming the programme when the programme status is Rinse Hold”, Page 30

The temperature is too high. Wait until the temperature has dropped. Cancel the programme.
“Cancelling the programme”, Page 30

Water level is too high.

41

enTroubleshooting

Fault

Cause and troubleshooting

The door cannot be opened.

Select a suitable programme for draining. “Programmes”, Page 23

Power failure. Open the door using the emergency release.
“Emergency release”, Page 48

The water is not drain- Drain pipe or water outlet hose is blocked.

ing.

Clean the drain pipe and the water outlet hose.

Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.

Drain pump is blocked. “Cleaning the drain pump”, Page 34

­ ­­ is activated. Continue the programme by selecting Spin or
Drain and pressing Start / Reload . “Resuming the programme when the programme status is Rinse Hold”, Page 30

The water outlet hose is connected too high. Install the water outlet hose at a maximum height of
1 metre.

Pump cover is not correctly assembled. Correctly assemble the pump cover.

Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next washing cycle with the same load.

Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water
hose. “Connecting the appliance”, Page 14

The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap must be in a vertical position.

Water is not flowing in. Detergent is not being dispensed.

You have not pressed Start / Reload . Press Start / Reload .

42

Troubleshootingen

Fault Water is not flowing in. Detergent is not being dispensed.
The spin cycle runs several times.
The programme duration changes during the wash cycle.
No water is visible in the drum. Drum jerks after the programme starts. Residual water is present in the compartment . Vibrations and movement of the appliance whilst spinning.

Cause and troubleshooting The filter in the water inflow is blocked. Clean the water inflow filter. The tap is turned off. Turn on the tap. The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or
jammed. The unbalanced load detection system eliminates an imbalance by repeatedly redistributing the laundry. Not a fault ­ no action required. Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle. The programme operation is optimised electronically. This may change the programme duration. Not a fault ­ no action required. The unbalanced load detection system eliminates an imbalance by repeatedly redistributing the laundry. Not a fault ­ no action required. Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle. Foam detection system switches on a rinse cycle if foam build- up is too high. Not a fault ­ no action required. Water is below the visible area. Not a fault ­ no action required. Do not add any extra water to the appliance while it
is operating. This is caused by an internal motor test. Not a fault ­ no action required. Insert in compartment is blocked. “Cleaning the detergent drawer”, Page 33
Appliance is not correctly aligned. “Aligning the appliance”, Page 15 The appliance feet are not fixed.

43

enTroubleshooting

Fault Vibrations and movement of the appliance whilst spinning. Drum rotates, water does not flow in. Heavy foam build-up
High spin speed not reached.
The spin programme does not start.

Cause and troubleshooting Secure the appliance feet.
“Aligning the appliance”, Page 15
Transit bolts have not been removed. “Removing the transit bolts”, Page 13. Load detection is active. Not a fault ­ no action required. Note: The load detection can take up to two minutes. Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next washing cycle with the same load.
A low spin speed is selected. The next time you run a wash cycle, set a higher
spin speed.
Unbalance load detection system is using a reduced spin speed to eliminate an unbalance. Redistribute the laundry in the drum. Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Spin programme. Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.
The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum. Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Spin programme.

44

Troubleshootingen

Fault

Cause and troubleshooting

Rushing, hissing noise.

Water is flushed under pressure into the detergent drawer. Not a fault ­ normal operating noise.

Loud noises during the spin cycle.

Appliance is not correctly aligned. “Aligning the appliance”, Page 15

The appliance feet are not fixed. Secure the appliance feet.
“Aligning the appliance”, Page 15

Transit bolts have not been removed. “Removing the transit bolts”, Page 13.

Banging noises, rattling in the drain pump.

Foreign bodies have got into the drain pump. “Cleaning the drain pump”, Page 34

Slurping, rhythmical suction noise.

The drain pump is active, the detergent solution is pumped out. Not a fault ­ normal operating noise.

Creasing.

The spin speed is too high. The next time you run a wash cycle, set a lower
spin speed.

The load is too large. The next time you run a wash cycle, reduce the
amount of laundry being loaded.

Unsuitable programme for the type of fabric. Select the programmes that are suitable for the
type of fabric.

Detergent or fabric Too much detergent/fabric softener in the detergent

softener drips off the drawer.

seal and collects on the door or in the seal

When dosing liquid detergent and fabric softener, observe the marking in the detergent drawer and

fold.

do not dose above this.

The spin result is not satisfactory. The laundry is too wet/too damp.

A low spin speed is selected. The next time you run a wash cycle, set a higher
spin speed. Start the Spin programme.

Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose.

Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.

45

enTroubleshooting

Fault

Cause and troubleshooting

The spin result is not satisfactory. The laundry is too wet/too damp.

The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum.

Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.

Start the Spin programme.

Unbalance load detection system is using a reduced spin speed to eliminate an unbalance. Redistribute the laundry in the drum.

Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.

Start the Spin programme.

Detergent residue on the damp washing.

Detergents may contain water-insoluble substances that deposit on the laundry. Start the Rinse programme.

Detergent residue on the dry laundry.

Detergents may contain water-insoluble substances that deposit on the laundry. Brush out the laundry after washing and drying.

Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. 1. Connect the water supply hose correctly.
“Connecting the water inlet hose”, Page 14 2. Tighten the screw connection.

Water is leaking out at The water outlet hose is damaged. the water outlet hose. Replace the damaged water outlet hose.

Water outlet hose is not connected correctly. Connect the water outlet hose correctly.
“Water outlet connection types”, Page 15

Odours have formed in the appliance.

Humidity and detergent residue may promote the formation of bacteria. “Cleaning the drum”, Page 33 If you are not using the appliance, leave the door
and detergent drawer open so that residual water can evaporate.

46

Troubleshootingen

Fault

Cause and troubleshooting

Fabric softener re-

The use of fabric softener is not supported for the se-

mains in the detergent lected programme.

drawer.

Before washing, check whether the use of fabric

softener is supported for the selected programme.

“Programmes”, Page 23

Water is leaking from Dirt on the door or seal causes leaks.

below the door.

Clean the door and the seal.

47

enTransportation, storage and disposal
17.1Emergency release
Releasing the door Requirement: The drain pump is empty. Page 34 1. ATTENTION! Escaping water may
cause material damage. Do not open the door if you can
see water through the glass. Pull the emergency release downwards with a tool and release.

18.2Inserting the transit bolts
Secure the appliance before transportation using transit bolts in order to prevent transport damage. 1. Use a screwdriver to remove the 4
cover caps.

a The door lock is released. 2. Insert the maintenance flap and
lock it into place. 3. Close the maintenance flap.
18Transportation, storage and disposal
18.1Removing the appliance
1. Turn off the tap. 2. Empty the water inlet hose. 3. Switch off the appliance.
“Switching off the appliance”, Page 31 4. Unplug the appliance’s mains plug. 5. Drain the water. “Cleaning the drain pump”, Page 34 6. Detach the hoses.

Keep the cover caps. 2. Insert the 4 transit bolts.
“Removing the transit bolts”, Page 13
18.3Using the appliance again
For further information, see “Installation and connection”, Page 12 and “Starting an empty washing cycle”, Page 19.

48

18.4Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. Do not install the appliance behind
a door as this may obstruct the appliance door or prevent it from opening. With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Serviceen
19Customer Service
Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (ENr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
19.1Product number (E-Nr.) and production number (FD)
You can find the product number (ENr.) and the production number (FD) on the appliance’s rating plate. Depending on the model, the rating plate is located: ¡ On the inside of the door. ¡ On the inside of the maintenance
flap. ¡ On the rear of the appliance. Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

49

enCustomer Service
19.2AQUA-STOP guarantee
In addition to warranty claims against the seller under the purchase agreement and in addition to our manufacturer’s warranty, we offer compensation under the following conditions. ¡ If our Aqua-Stop system is defect-
ive and causes water damage, we will make good the damage for private users. To ensure protection from water damage, the appliance must be connected to the power supply. ¡ The liability guarantee is valid for the service life of the appliance. ¡ A claim can only be made under the guarantee if the appliance has been correctly installed and connected with Aqua-Stop according to our instructions; this also includes correctly fitting the AquaStop extension (genuine accessory). Our guarantee does not cover defective supply lines or fittings up to the Aqua-Stop connection on the tap. ¡ If your appliance is fitted with Aqua-Stop, you can in principle leave your appliance unattended during operation and the tap turned on afterwards. The tap only needs to be turned off if you are away from home for a long period, e.g. on holiday for several weeks.
50

Consumption valuesen

20Consumption values

The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456.

Programme

Load (kg)

Pro- Energy

gramm con-

e dura- sump-

tion

tion

(h:min)1 (kWh/

cycle)1

Water consumption (l/ cycle)1

Max- Spin imum speed temper- (rpm)1 ature (°C) 5 mins1

Residual moisture (%)1

Eco 40-602 8.0

3:33 0.800 70.0 37

1400 53.00

Eco 40-602 4.0

2:40 0.350 36.0 27

1400 53.00

Eco 40-602 2.0

2:20 0.180 30.0 23

1400 53.00

Cottons 20 °C

8.0

3:25 0.330 89.0 23

1400 50.00

Cottons 40 °C

8.0

3:25 1.210 89.0 44

1400 50.00

Cottons 60 °C

8.0

3:25 1.510 89.0 58

1400 50.00

Easy Care

4.0

2:30 0.770 61.0 44

40 °C

1200 35.00

Quick/ 4.0 Mix 40 °C

1:05 0.630 44.0 41

1400 52.00

Wool 30 °C

2.0

0:41 0.300 48.0 29

800

26.00

1 Due to the influence of water pressure, hardness and inlet temperature, ambient temperature, type, amount and soiling of laundry, detergent used, fluctuations in the power supply and the selected additional functions, the actual values may deviate from the stated values.
2 Test programme in accordance with the EU Ecodesign Directive and the EU Energy Labelling Regulation with cold water (15 °C).

21 Technical data
Appliance height 84.8 cm Appliance width 59.8 cm Appliance depth 59.0 cm

Appliance depth with door closed Appliance depth with door open Weight Maximum load

63.2 cm
106.3 cm
72.2 kg 8.0 kg

51

enTechnical data

Mains voltage

220-240 V, 50 Hz

Minimum in- 10 A stallation protection

Nominal power 2300 W

Power consumption

¡ Off mode: 0.15 W
¡ Left-on mode: 0.50 W

Water pressure

¡ Minimum: 100 kPa (1 bar)
¡ Maximum: 1000 kPa (10 bar)

Length of the wa- 150 cm ter inlet hose

Length of the wa- 150 cm ter outlet hose

Length of the power cord

160 cm

You can find more information about your model online at https:// eprel.ec.europa.eu/1. This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the characters before the slash in the product number (E-Nr.) on the rating plate. Alternatively, you can also find the model identifier in the first line of the EU energy label.

1 Only applies to countries in the European Economic Area 52

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
· Expert tips & tricks for your appliance · Warranty extension options · Discounts for accessories & spare-parts · Digital manual and all appliance data at hand · Easy access to Bosch Home Appliances Service
Free and easy registration ­ also on mobile phones: www.bosch-home.com/welcome

Looking for help? You’ll find it here.

Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch- home.com
A Bosch Company
9001867246
9001867246 (030523) en

Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>