WATTS WAT BT-RRF Wireless Wall Receiver Instruction Manual

: June 4, 2024
: WATTS

Table of Contents

Technical characteristics
Presentation / Radio Configuration Mode
Documents / Resources

WIRELESS WALL RECEIVER
WAT BT-RRF FREE CONTACT

Technical characteristics

Environment. (Temperatures)
Operating :
Transport et storage :| 0°C – 40°C
-10°C to +50°C
---|---
Power supply| 230Vac 50Hz
Electrical protection| Class II – IP44
Type of contact
Maximum Load| 2 wires (free contact)
Screw connectors <1.5mm².
Up to 8A – 250Vac 50Hz
Radio Frequency| 868 MHz, <10mW.
Norms and homologation:
Your thermostat has been designed in conformity with the following standards or other normative documents:| EN 60730-1 : 2003
EN 61000-6-1 : 2002
EN 61000-6-3 : 2004
EN 61000-4-2 : 2001
EN300220-1/2
EN301489-1/3
R&TTE 1999/5/EC
Low voltage 2006/95/CE
EMC 2004/108/CE

Presentation / Radio Configuration Mode

Install and plug the receiver into the following guidelines: Pay attention before the installation of your receiver, some routing rules should be make to garanty an optimal working.
• The receiver must be put at a minimum distance of 50cm of all others electrical or wireless materials like GSM, Wi-Fi router.
• Before wiring work related to the receiver must be carried out only when de- energized
• Plug your receiver to the power supply.
Then press the Receiver push button during 5sec , the Green RF LED should lit up (fixed) indicating that the Receiver is now in radio configuration mode waiting for a thermostat configuration address.
Please refer to the thermostat leaflet for enter the thermostat in “RF Init” mode.
Verify that radio signals are correctly received by the Receiver. On the Receiver, the Green LED should blink at each radio signal received from the thermostat.
Exit the Radio configuration mode on the thermostat. (Please refer to the thermostat leaflet)
Now starting your installation is ready to works.

United Kingdom
Watts Industries UK Ltd
Colmworth Business Park
Eaton Socon, St. Neots
PE19 8YX United Kingdom
T: +44 (0) 1480 407074
F: +44 (0) 1480 407076
Email: wattsuk@wattswater.com
http://wattswater.co.uk

The descriptions and photographs contained this product specification sheet are supplied by way of information only and are not binding. Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice. “Warranty: All sales and contracts for sale are expressly conditioned on the buyer’s assent to Watts terms and conditions found on its website www.wattswater.eu Watts hereby objects to any term, different from additional to Watts terms, contained in any buyer communication in any from unless agreed to in a waiting signed by an officer of Watts.

Watts Electronics SAS
B.P. N°10 – Z.A. des Tourettes, 43800 ROSIERES, Francia,
T: —33(0) 471 57 40 49. F: +33(0) 471 57 40 90,
www.wattswater.eu

PPLIMW13822Ag

Documents / Resources

| WATTS WAT BT-RRF Wireless Wall Receiver [pdf] Instruction Manual
WAT BT-RRF Wireless Wall Receiver, WAT BT-RRF, Wireless Wall Receiver
---|---
| WATTS WAT BT-RRF Wireless Wall Receiver [pdf] Installation Guide
WAT BT-RRF, WAT BT-RRF Wireless Wall Receiver, Wireless Wall Receiver, Wall Receiver, Receiver