Pro sKit SS-628 Series Mini Hot Air Gun User Manual

Pro sKit SS-628 Series Mini Hot Air Gun

Product Information

• Product Name: SS-628 Series Mini Hot Air Gun
• Model: SS-628F (AC 230/240V 50/60Hz), SS-628A (AC 110-120V 50/60Hz)
• Power: Setting I – 250W, Setting II – 500W
• Temperature: Setting I – 350°C, Setting II – 500°C
• Air Volume: Setting I – 150L/min, Setting II – 300L/min
• Weight: 370g
• Heating Element: SS-628F: 5SS-628F-H, SS-628A: 5SS-628A-H
• Attachment: Reflector Bayonet Nozzle x1pc
• Plug Type: SS-628F – F, SS-628A – A

Product Usage Instructions

1. Maintain proper balance and always footing.
2. Keep the gun handle dry, clean, and free from oil and grease.
3. Do not force the tool or accessories and use only for the purpose intended.
4. Always stand the gun in an upright position or hang it up by its convenient hanger.
5. Never use in wet environments or areas of high humidity (for example bathrooms, steam rooms, etc.).
6. Never poke anything down inside the hot air nozzle.
7. Always allow the heat gun to cool down completely before storing it.
8. Always store the gun in a safe place, out of the reach of children.
9. Be aware of the work environment. Areas behind ceilings, floors, and soffits may contain highly flammable materials. Always check these areas before applying heat.
10. Keep the work area with sufficient light.
11. Guard against electric shock by preventing contact with grounded surfaces (for example: pipes, radiators, ranges, refrigerator enclosures).
12. Never carry the gun by its power cord or yank the cord from an electrical outlet.
13. Inspect extension cords periodically and replace them if damaged.
14. When using the tool outdoors, only employ extension cords intended for use outdoors and marked W-A.
15. When working on small or irregularly shaped objects, secure them with vises or clamps.
16. Disconnect the tool when not in use to avoid unintentional starting. If the gun shuts down during operation, disconnect it from the power supply and have the gun serviced by authorized service personnel.
17. Pay attention to the work and use common sense when operating this tool. Do not operate the tool when you are tired or taking medication or drugs that make you drowsy.
18. The air nozzle should not be blocked.

Name of Parts:

• Air outlet for nozzle
• Scald proof sheath
• Vertical Stand
• Air inlet
• Adjustment switch (OFF/I/II)

Maintenance and Repair:
Do not use Turpentine, paint mixture, gasoline, or the same substance for cleaning.

IMPORTANT SAFETY INSTRUCTIONS

Before using, please take a few minutes to read all instructions carefully and pay attention to safety notices and warnings to ensure work safely. Keep these instructions for future use.

WARNING

• To reduce the risk of fire or electric shock, do not be exposed to rain or moisture. Store indoors.
• When servicing, use only identical replacement parts.
• Never use the heat not airflow toward people or animals.
• Never use the heat gun near flammable materials or gases.
• Never obstruct the hot airflow by blocking or covering the air outlet.
• Never touch the hot air nozzle, it becomes extremely hot.
• Always wear protective work gloves.
• Never touch the nozzle to any surface when running the gun or shortly after running.
• Always wear eye protection when removing paint from overhead positions.
• Do not wear loose-fitting clothing or jewelry. Wear nonskid footwear and a protective cap to wrap long hair.
• Maintain proper balance and always footing.
• Keep the gun handle dry, clean, and free from oil and grease.
• Do not force the tool or accessories and use only for the purpose intended.
• Always stand the gun in an upright position or hang it up by its convenient hanger.
• Never use in wet environments or areas of high humidity (for example bathroom, steam rooms, etc.)
• Never poke anything down inside the hot air nozzle.
• Always allow the heat gun to cool/down completely before storing it.
• Always store the gun in a safe place, out of the reach of children.
• Be aware of the work environment. Areas behind ceilings, floors, and soffits may contain highly flammable materials. Always check these areas before applying heat.
• Keep the work area with sufficient light.
• Guard against electric shock by preventing contact with grounded surfaces (for example: pipes, radiators, ranges, refrigerator enclosures.)
• Never carry the gun by its power cord or yank the cord from an electrical outlet.
• Inspect extension cords periodically and replace damaged ones.
• When using the tool outdoors, only employ extension cords intended for use outdoors and marked “W-A”
• When working on small or irregularly shaped objects, secure them with vises or clamps.
• Disconnect the tool when not in use. Avoid unintentional starting. lf the gun shuts down during operating, disconnect from the power supply and have gun serviced by authorized service personnel.
• To be on the alert! Please pay attention to the work and use common sense when operating this tool. Do not operate the tool when you are tired or taking medication or drugs that make you drowsy.
• The air nozzle should not be blocked.

Specification

SS-628A :5SS-628A-H

| SS-628F| SS-628A
F| A

Attachment: Reflector Bayonet Nozzle x1pc.

Purpose

Purpose (can only be used in the following situations)

1. When removing or applying paint, a hot air nozzle and scraper can be used.
2. Remove self-adhesive stickers and decorations.
3. Remove rust or excessively tight nuts and metal screws.
4. Dissolve frozen conveying pipes, frozen door locks or padlocks, etc.
   • ▲ Warning: Do not use plastic pipes Before treating oil, and stains or replacing old grinding powder, it can be softened first.
5. Before combining or processing, the damp wood needs to be dried first.
6. Shrinkable PVC film as a protective layer for packaging.
7. It can be used for waxing or de-waxing on sleds.
8. Polyethylene material that can shrink and connect metals.
9. It can soften the welding material.

Name of Parts

1. Air outlet: for nozzle
2. Scald proof sheath
3. Vertical Stand
4. Air inlet
5. Adjustment switch (OFF/I/II)

Adjustment switch

• O: OFF
• I: 250W 350℃ 150L/min
• II: 500W 500℃ 300L/min

Maintenance and repair

Do not use Turpentine, paint mixture, gasoline, or the same substance for cleaning.

1. When storing the hot Mini heat gun, please confirm that it has completely cooled down.
2. Regularly remove accumulated dirt from the air inlet and maintain the cleanliness of the air inlet and outlet.
3. Check all extended insulated wires and replace them immediately if damaged. Do not use damaged insulated wires as they may cause electrical shock and injury if touched.
4. All repairs must be carried out by authorized service centers or other qualified service organizations to ensure safety and reliability.

Contact Information

PROKIT’S INDUSTRIES CO., LTD

• Website: https://www.prokits.com.tw.
• Email: [email protected].

©2023 Prokit’s Industries Co., LTD. All rights reserved 2023001(C).

References

• Pro'sKit Official Website
• Pro'sKit Official Website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>