DENVER BPB-100C Powerbank Instruction Manual

DENVER BPB-100C Powerbank

Product Information

Aux in
LED Indicator| 1 red light: Charging
2 blue light: Discharge
3 blue light: Bluetooth connected
The Red LED flash indicates charging, red LED constantly on indicates
full charge
Bluetooth indicated LED: Quickly flash means Bluetooth
disconnected, slowly flash means Bluetooth connected, constant
light on means line-in mode
Compatibility| Wireless: HFP/A2DP/AVRCP
Power| Battery capacity: 4000mAh/3.7V
Type of battery: 26650, 1PC
Input current: 1.0A MAX
Output current: 1.0A MAX
Charging time: 3-4 hours
Service time: more than 500 cycles
Dual IC Protection: Overcharge or discharge
The average conversion rate: 85%
Speaker| Output: 2W max 4 load
THE: 0.1% @1W
Signal-to-noise ratio: 90DB
Bluetooth| Bluetooth version: V2.1+EDR
Frequency: 2.4GHz
Transmission distance: 8-10M
Standby time: 10 minutes (only for no Bluetooth connection)

Product Usage Instructions

1. Safety Precautions:
   • Do not use or store the unit in high temperatures or hazardous locations.
   • Do not expose the unit to rain.
   • Do not disassemble, repair, or modify the unit.
   • Avoid throwing or putting the rechargeable battery in the fire to avoid an explosion.
   • Avoid listening to music at high volume for a long time as it may cause damage to your ears.
   • Low battery power may result in a reduction in Bluetooth transmission distance or disconnection.
2. Operating Speaker:
   • To power on the speaker, take off the top and put it back on.
   • You will hear a beep indicating that the unit is in Bluetooth status and waiting for the connection.
   • To power off the speaker, take the cap off. The speaker will also, auto shut off after 5 minutes if there is no connection, even if the cap is on.
3. Power Bank Function:
   • Plug one end of the USB Cable into the speaker and plug the other end (micro USB) into a phone to charge it.
4. Bluetooth Speaker Function:

Bluetooth Pairing:

1. After hearing the prompt beep, the speaker is ready to pair with your Bluetooth device and the Blue LED light will be blinking fast.
2. Activate Bluetooth on your compatible device and set it to search for compatible devices.
3. Select the speaker BPB-100 from the list of found devices.

Safety precautions

1. Do not use or store the unit in high-temperature or hazardous locations.
2. Please do not expose the unit to rain.
3. Please do not disassemble, repair, or modify the unit.
4. The unit comes with a rechargeable battery so please do not throw or put in fire to avoid explosion.
5. Please do not listen to music in high volume for a long time as it may cause damage to your ears.
6. Low battery power may result in a reduction in Bluetooth transmission distance or disconnection

Overview

1. LED indicator:
2. red light: Red LED flash indicates charging, red LED all along on indicates fully charged
3. blue light: Keep on indicates discharge, flash indicates lower power
4. blue light : Bluetooth indicated LED, quickly flash means Bluetooth disconnected slowly flash means Bluetooth connected, constant light on means line in mode
5. functions (Phone stand, power bank, Bluetooth wireless playing music, and Aux-in)

Operating speaker

Power On Status:

• Take off the top and put it back on to turn on the speaker, you will hear a ‘’beep’’ to show the unit is in Bluetooth status, and waiting for a connection.

Power Off:

• Take the cap off, the speaker shuts down. The unit will auto shut off after 5minuts if no connection even if the cap is on.

1. Power Bank Function
   • Plug one end of the USB Cable into the speaker and plug the other end of the cable (micro USB) into the phone to charge.
   • Note: The provided cable is a MICRO USB connection, other cables for iPads, IPHONE, etc typically included with these items.
2. Bracket function
   • Plug one of Φ3.5mm Audio Plug into the unit working jacket, and plug the other plug of Φ3.5mm Audio Plugin into the phone, you will hear a ‘’beep’’, The unit will act as bracket function and it is now in Aux-in Mode.
3. Using the Speaker in Line-In Mode
   • Plug the provided Aux-in cable and plug one end of the Φ3.5mm Audio Cable into the unit and another end into the mobile, and you will hear a ‘Beep’, the unit is now in Aux-in mode, and you can play music.

Bluetooth speaker function

A. Bluetooth Pairing

If the speaker has never been paired with a Bluetooth device before, you need to follow the instructions below to pair your speaker with your Bluetooth device.

1. After hearing the prompt “beep”, the speaker is ready to pair with your Bluetooth device and the Blue LED light will be blinking fast.
2. Activate Bluetooth on your compatible device and set it to search for compatible devices.
3.  Select the speaker “BPB-100” from the list of found devices.
   • Note: If the speaker is already connected to another Bluetooth device then the speaker will not appear in search list and you need to disconnect the current paired Bluetooth device from the speaker and search again.
4. If the pairing is successful, the speaker will have prompt “beep” and the Blue LED light indicator will be changed from quickly blinking to slow blinking, your speaker is ready to play music.
   • Note: If the speaker has been paired to the Bluetooth device before, you need to follow the pairing instructions below to connect the speaker to the Bluetooth device:
   • Activate Bluetooth on your compatible device, turn on the speaker and the speaker will connect automatically to the compatible device and you will hear a prompt “beep”.
   • B. Playing Music in Bluetooth Mode
   • After the Bluetooth device is connected successfully to the speaker, you will be able to play music from your Phone.
5. Bluetooth standby:
   • When you cover the cap to turn on the device, and Bluetooth is not connected with the speaker for more than 5 minutes, the device will be automatically turned off to protect stored power. If you want it to work, take off the cap then cover the cap on the unit again.
6. Turn off Bluetooth:
   • Take off the cap to turn off Bluetooth.
7. Plug one end of the line in the cable to the unit working 3.5mm jacket, and then the unit is on and will be in Bluetooth status.
   • The speaker comes with a built-in rechargeable battery. Connect the end of 2 in 1 USB cable provided to a computer or into a DC 5V power adaptor (not included), and plug the other end of the 3.5mm audio cable into the unit, The LED light will turn Red and fast blinking when you start charging it. The charging time is approximately 3-4 hours, the LED light will be keeping
   • RED When the speaker is fully charged, unplug the Speaker from the power device.
   • Note: Audio cable must be plugged into the working 3.5mm jacket of the device, the other 3.5mm jacket on the unit is a dummy.

Compatibility

Wireless: HFP/A2DP/AVRCP

Product Features

Power:

• Battery capacity: 4000mAh/3.7V
• Type of battery: 26650, 1PC
• USB charging voltage: DC 5V ±5% Input current: 1.0A MAX output voltage: DC 5V ±5% output current: 1.0A MAX
• Charging time : 3-4 hours
• Service time: more than 500 cycles, dual IC
• Protection: overcharge or discharge
• The average conversion rate : ≥85%

Speaker:

• Output: 2w max 4Ω load
• THE: 0.1% @1W
• Signal-to-noise ratio : ≥90DB

Bluetooth:

• Bluetooth version: V2.1+EDR
• Frequency: 2.4GHz
• Transmission distance: ≤8-10M
• Standby time: 10 minutes (only for no Bluetooth connection)

WARNING:

• If this device isn’t used for a long time, we suggest recharging the speaker at least once a month to protect the battery.

Components

1. Unit: 1pc
2. 3.5mm Aux cable : 1pc
3. 2 in 1 USB cable: 1pc
4. Manual: 1pc

Trouble Shooting Guide

• Should you experience any difficulty while using the unit, Please refer to the following Chart.

outlet or the USB cable (included) is not plugged into the

3.5mm jack of the unit

| Plug the USB power adaptor (not included) into a wall outlet and plug the USB cable (included) into the 3.5mm jack of the unit
The wall outlet is not functioning.| Plug another device into the same outlet to confirm the outlet is working.
 | The computer USB port is not

function.

| Make sure your computer power is turned on and try another USB port.
---|---|---
No Sound| The unit battery has no power| Recharge the speaker
The speaker is not linked to the

cell phone.

| Go through the “Operating speaker” process to connect.
The volume set is too low.| Increase the volume of your device.
No Audio Signal via Bluetooth Connection| The speaker is not paired with the audio source.| Check whether a connection exists. If necessary pair the speaker again to the audio source
 | Increase the volume of the audio source.
The speaker cannot be connected| Pairing does not work| Check whether the audio source supports

the A2DP protocol

The audio source is switched off| Switch on the audio source
Bluetooth is switched off at the audio source.| Switch on the Bluetooth function in the audio source.
Bluetooth version is not

supported.

| Use a different playback unit.
Poor Sound quality

from a Bluetooth device

| Bluetooth device is almost out of range of the speaker| Move your Bluetooth device closer to the speaker

• ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S www.denver-electronics.com
• Electric and electronic equipment including batteries contains materials, components, and substances that can be hazardous to your health and the environment if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
• Electric and electronic equipment and batteries are marked with the crossed-out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.
• As the end user, it is important that you submit your used batteries to the appropriate and designated facility. In this manner, you make sure that the batteries are recycled in accordance with the legislature and will not harm the environment.
• All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites or be collected from households. Additional information is available at the technical department of your city.
• Hereby, Inter Sales A/S, declares that this product BPB-100C is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity may be obtained at Stavneagervej 22, DK-8250 Egaa, Denmark
• Imported by: DENVER ELECTRONICS A/S, Stavneagervej 22, DK-8250 Egaa, Denmark
• Imported by: DENVER ELECTRONICS A/S
• Stavneagervej 22
• DK-8250 Egaa
• Denmarkwww.facebook.com/denverelectronics

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>