LEDone LOC-ELHB Series UFO High Bay 300W Plug and Play LED Fixture Installation Guide
- June 13, 2024
- LEDone
Table of Contents
LEDone LOC-ELHB Series UFO High Bay 300W Plug and Play LED Fixture
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS: Read the instructions carefully before attempting to install the fixture.
- All wiring should be performed by a qualified electrician.
- Disconnect power before installing or servicing. This fixture must be wired in accordance with the National Electrical Code and applicable local codes and ordinances.
- Proper grounding is required to ensure personal safety.
CAUTION: Risk of fire
- WARNING: Make certain power is OFF before installing or maintaining the fixture. No user-serviceable parts inside.
- WARNING: The fixture must be connected to a wiring system with an equipment-grounding conductor.
- WARNING: Make sure the supply voltage is the same as the rated luminaire voltage.
- WARNING: Do NOT operate in ambient temperatures above those indicated in the fixture label.
- WARNING: Avoid use in environments containing sulfur, chlorine or other halides, methyl acetate or ethyl acetate, cyanoacrylates, glycol ethers, formaldehyde, or butadiene.
CLEANING & MAINTENANCE:
CAUTION: Be sure the fixture temperature is cool enough to touch. Do NOT clean or maintain while the fixture is energized.
- Clean the glass lens with a non-abrasive cleaning solution.
- Do NOT open the fixture to clean the LED. Do NOT touch the LED.
Note: These instructions do not cover all details or variations in equipment, nor do they provide for every possible situation during installation, operation, or maintenance.
TROUBLESHOOT
- If the light will not come on:
- A. Light switch is turned off. Turn light switch on.
- B. Fuse is blown, or the circuit breaker is turned off. Replace the fuse or turn the circuit breaker on.
- C. Incorrect circuit wiring. Verify that the fixture is wired properly.
LOC-ELHB Series Installation Guide
MOUNTING
HOOK MOUNTING:
- Fix the hook on the light. (Clockwise rotation)
- Use an electric drill to bore a hole in the wall.
- Install the hanger to the wall.
- Fix the hook onto the hanger and complete the installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>