Wayfair F102Y Eurydamas Ceiling Fan with LED Lights Owner’s Manual
- June 13, 2024
- wayfair
Table of Contents
Wayfair F102Y Eurydamas Ceiling Fan with LED Lights
Safety Rules
Please read all safety instructions prior to installing your ceiling fan and save this document for future reference. If you are in doubt with any of the information provided or difficulty installing your fan, please contact us via Amazon message.
- Before you begin installing the fan, shut power off the circuit breaker for the fuse box.
- Read all instructions and safety information before installing your new fan.
- All wiring must be in accordance with national and local electrical codes. ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.
- Do not bend the blades while installing, balancing the blades, or cleaning the fan.
- Do not insert foreign objects in between rotating fan blades.
- Make sure the installation site you choose allows the fan blades to rotate without any obstructions.
- To Reduce the Risk of Electric Shock, Disconnect the electrical supply circuit before installing the light kit.
- fter you install the fan, make sure that all mounting components are secured to prevent the fan from falling.
- Turn the fan off and wait for the blades to stop completely before performing any maintenance or cleaning.
Mounting Bracket Installation
The outlet box screws allow the mounting bracket to slide into place on the box.
Fan-motor Assembly
Ball/downrod Assembly
Wiring
WARNING
Disconnect the electrical supply circuit before wiring to reduce the risk of electric shock.
- Put receiving unit into the top of the fan body and fastened it with electrical tape to avoid movement.
- Make wire connections according to wire colors, labels and diagram above.
Remote Control
CAUTION
If the indicator light does’t bright while pressing any buttons, then check the battery first. It may be reversed or out of power.
CAUTION
The remote is pre-paired with the fan. If the remote does not work, please re-
pair as follow:
Long press the “Pair Code” button within 5 seconds when the fan is powered on.
The light flashes, then the remote is connected with the fan successfully.