TARAMPS THS 1000 Multi Channel Receiver Instruction Manual

TARAMPS THS 1000 Multi-Channel Receiver

Introduction

Congratulations on purchasing a Taramps product. Developed in a modern laboratory, with the highest technology and highly qualified professionals. This manual explains all the resources, operations, and guidelines for resolving questions that may arise in your installation. Take time to read it carefully and ensure the proper installation and use of all the benefits that this product can offer. In case of doubt even after reading this manual, please contact our technical support at the number +55 18 3266 4050 or our website at www.taramps.com.br.

Presentation

The TARAMPS THS 1000 is a Receiver developed with high technology to integrate different environments. Compact and powerful it can be used in several applications providing quality sound.

Application examples

• Environment sounds for stores, shops, and clinics. It also allows, through the microphone input, warnings to be transmitted via the sound system.
• In your leisure area, gourmet space, country house, etc. Including various audio input options, such as Bluetooth, AUX, and USB, it allow the audio sources to be easily changed giving the user flexibility in choosing the preferred audio.
• The equipment is an automatic bolt and can be connected to any power plug between 90 and 240V. It has a switching power supply that is more efficient in the consumption of electricity.
• If you are not going to use the product for a long time, we recommend that you disconnect from the power plug.

Important recommendations

• The THS 1000 must be installed in a firm and ventilated place, away from heat and humidity places. Avoid locations with direct sunlight.
• Do not block the ventilation holes on the top and rear.
• Avoid falls and impacts.
• carefully observe the polarity and impedance of the loudspeakers.
• Use cables according to the distance between the THS 1000 and the loudspeakers.
• The table below shows the recommended gauges according to the distances: In case of unwanted noise make sure that the cables and connections are in good condition.
• Leave the volume to a minimum of unused channels.

Audio source
The TARAMPS THS 1000 has the following audio inputs:

1. USB: Flash drive input
2. MICRO SD CARD
3. AUX (front): P2 standard auxiliary input.
4. AUX1 and AUX2: RCA standard auxiliary inputs.
5. BLUETOOTH
6. FM radio

The connected device must contain music in MP3 format to be identified by the equipment. Maximum supported size: 64GB. We advise you to always have a good antivirus, so there are no problems with the Flash Drive or micro SD card when connecting to the product. Infected devices may cause undesirable effects on the THS 1000, such as Slow music reading and general failures. Do not use the USB input to connect to the computer or to recharge other devices that have batteries.

Package content

• 01 Multi Channel Receiver THS 1000
•  01 Remote Control
• 01 AC Adapter 12V – 03 Amperes

Knowing your equipment

Front Panel

1. MICRO SD: Micro SD memory card input. (The card must be positioned as the image shows, with the terminals facing up).

2. USB: Flash Drive input.

3.  Aux. (P2 Connector): Receives audio signal from the P2 output of your phone, tablet, MP3, or computer, among others. Use good quality cable to avoid unwanted noise.

4. Track- /Volume-:Short Touch: Rewind the music tracks in the USB/SD/BLUETOOTH. Reduce 0.1MHz of the frequency. Long Touch: Reduce the volume in all source options. Automatic search to previous stations.

5. Play / Pause: Short Touch: Pause or start the music on USB / SD / BLUETOOTH. Advances next saved the memory position of FM stations. Mute for the AUXILIARY option. ong Touch: Searches for FM stations and saves them in memory.

6. Track + /Volume +
   Short Touch: Forward the music tracks in the USB/SD/ BLUETOOTH. Increase 0.1MHz of the frequency. Long Touch: Increase the volume in all source options. Automatic search to next stations.

7. Mode / ON/OFF: Short Touch: Changes the source options, such as USB/ SD / AUXILIARY / BLUETOOTH/FM. Long Touch: To turn on or off the device.

8. LED Display – Remote control IR sensor: For better communication between the remote
   control and the device. point the control at this point on the display. Front Panel (sequence)

9. STAND-BY LED: Remains on when the equipment is turned off and plugged into a powered outlet.

10. QUALIZATION: 2 bands audio equalizer adjusts.LOW: Bass frequencies HIGH: High frequencies.

11. VOL: Adjusts the output volume).

Knowing your equipment

Rear Panel

1. POWER CABLE: Connect
2. VENTILATION HOLES: Do not obstruct the rear and the upper ventilation (cover) for better performance of the product.
3. SPEAKER OUT: To connect the loudspeakers. Follow the indicated polarity and the recommended minimum impedance of 0.66 ohms.
4. LINE OUT: The LINE OUT output allows you to send the audio signal (not amplified) to other equipment, such as a THS 3600, an active amplifier, or a subwoofer. This signal goes through the equipment’s equalization settings (LOW and HIGH).
5. AUXINPUT: Land R (RCA) input works in parallel with the front AUX input (connector P2).
6. FM ANTENNA: Indoor wire antenna for FM radio reception. Position the wire antenna in order to achieve the best FM reception.

Remote control functions

The THS 1000 has a compact remote control, so you can remotely control the device with practicality.

ON /OFF: Press the key to turn off the device.
Mos MODE: Switch the audio source (USB, BLUETOOTH, SD, AUXILIARY, FM).
MUTE
PLAY / PAUSE: Pause or start the music to USB/SD/ BLUETOOTH.
FM: Short Press: Advances next saved memory location of FM stations.
Long Press: Searches font M stations and saves them in memory,
TRACK-/ FOLDER -/ FM-
Short Press: Previous 0.1 MHz of the frequency. Previous track
Long Press: Previous folder. Automatic search to the previous station.
TRACK+/FOLDER +/FM+
Short Press: Next 0.1 MHz of the frequency. Next track
Long Press: Automatic search to the next station. Next folder
EQUALIZATION: Pop/ Rock/Jazz/ Country / Normal.
Do not work in auxiliary mode.
FM: Short Press Return to the saved memory position of FM stations.
VOL-: Volume down
VOL+: Volume up
REPEAT: Repeat /play MP3 options
USO USB/SDCARD /FM-MEMO
Switch mode between USB / SD Card. Searches for FM stations and saves them in memory.
NUMERIC KEYBOARD: FM: Long Press saves FM stations.

Bluetooth

When selecting the Bluetooth function (identified with “bt” on the display), the THS 1000 waits for a Bluetooth connection. Search for the device called “TARAMPS” using your phone, tablet, PC, or other and match it. To connect to a new device, disconnect the current one and make the new Bluetooth pairing. Bluetooth specification: class I with a 10m maximum range and may vary according to the environment (such as walls) and the connected device.

Bluetooth use example
Some TVs have an audio output system via Bluetooth. If your TV has this feature, it’s possible to transmit the audio to the THS 1000. Consult your TV manufacturer’s manual.

Example of using an RCA connection

Select the AUX function on the ‘‘SOURCE’’’key.

Connect control use example (Long range transmitter)

Example of using an RCA connection
The THS 1000 is compatible with the CONNECT CONTROL, TARAMPS long-range remote control which allows you to control your sound over wide distances and without the need to point the control at the device. The THS 1000 does not lose the functionality of the USB port, as the connect control allows a Flash Drive to be plugged into its USB port.  For more details on the CONNECT CONTROL TARAMPS functionalities consult its manual on the website.
OTE : Connect Control Taramps are sold separately

Connection examples – Wall sconces

Examples to until 12 loudspeakers 8 ohms each
For this kind of connection use cables with a minimum gauge of 1.5mm² for up to 40 meters. For long distances, consult the table on page 12 ‘‘Important recommendations’’. It’s necessary to make connections in parallel and series as shown in the example, to match impedance.

Term of warranty

Located at Rua Abilio Daguano, 274 Res. Manoel Martins – Alfredo Marcondes – SP, ZIPCODE 19.180-000, TARAMPS guarantees this product against defects in design, manufacture, assembly and/or jointly due to design flaws that make it inappropriate or unsuitable for the intended use, for a period of 12 months from the date of acquisition: In case of a defect in the warranty period, TARAMPS is responsible for the repair on replacement of the device manufactured by.

This warranty excludes

• Products damaged by improper installation, water infiltration, and violation by unauthorized persons;
• Torn or torn warranty seal;
• Cases where the product is not used under normal conditions;
• Defects caused by accessories, modifications on equipment attached to the product
• The product shows damage due to falls, impacts, or the action of agents of nature (floods, lightning, etc.);
• Costs of removing and reinstalling the equipment, as well as transporting it to the technical assistance station;
• Damage of any nature, resulting from product problems, as well as losses caused by interruption of use.

Technical assistance

We have technical assistance all over Brazil and we are always ready to answer your questions and needs. To locate an electronic Taramps technical assistance near you, access our website: www.taramps.com.br/pt/rede-de-assistances- tecnicas or contact the factory’s technical assistance department:

Taramps Electronics
Rua Abilio Daguano, a 274
ZIPCODE: 19.180-000
Phones + 55 18 3266-40507+55 18 99749-3391
E-mail: service@taramps.com.br

Technical features

The values mentioned are typical and may change due to the tolerance of components or the manufacturing process. For more information or questions visit our website or contact TARAMPS support. Taramps reserves the right to modify the contents of this manual without prior notice and not to apply the modifications to units previously produced.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>