TARAMPS Borderless 6 Ceiling Speaker User Manual

TARAMPS Borderless 6 Ceiling Speaker

Product Information

Specifications

• RMS Power: 40 Watts
• Program Power: 80 Watts
• Nominal Impedance: 4 Ohms or 8 Ohms
• Frequency Response: 40Hz to 18,000Hz
• Resonance Frequency: 56.911 Hz
• Weight: 1.65 lb (0.75 Kg)

Product Dimensions
8.31 inches (211 mm) x 3.07 inches (78 mm)

Product Usage Instructions

Suggestions for Residential Space
Gourmet space, leisure area kitchens, rooms in general, and other spaces…

Suggestions for Commercial Space:
Bakeries, supermarkets, stores, bars, restaurants, clinics, and other spaces…

Installation
For fixing latches on plasterboard or ceiling lining, refer to the illustrative picture provided.

CAUTION: When using an electrical screwdriver, ensure that the torque is not set too high to avoid complications during installation.

FAQ

• Q: Can the Taramps 6 ceiling speaker be used outdoors?
  A: The speaker is designed for indoor use in residential and commercial environments. Outdoor use may affect performance and durability.

• Q: Can I paint the speaker to match my decor?
  A: It is not recommended to paint the speaker as it may affect sound quality and product longevity. The speaker comes with a modern design and fine finish to complement various spaces.

With 40 Watts RMS 6” speaker

• The Taramps 6” ceiling speaker was developed for residential and commercial environments and offers a more modern design with a fine finish. It is made of polypropylene material, with UV protection, to guarantee product quality for longer.
• A practical and elegant solution to those who want high-quality sound at any environment without compromising space and aesthetics.

Installation

The Taramps ceiling speaker was designed to be easy to install with no complications. Follow the instructions below to obtain satisfactory results:

1. With the product out of the packaging, take the cardboard cutout template to make the correct marking on the plasterboard or where you will embed it.
2. Remove the front screen, using a thin, sharp object. Be careful not to damage the plastic parts (Use a utility knife or screwdriver carefully).
3. Connect the wires to the Borne terminal (Red = positive and Black = negative).
4. Check that the 4 fixing latches are positioned inwards. If not, position them.
5. Fit the ceiling speaker into the location to be fixed and, using a screwdriver or Philips screwdriver, tighten the screws proportionally and slowly until you notice that the ceiling speaker is firm. When tightening, the latches will rotate automatically to lock position.
6. Once this is done, check if it is fitted correctly and place the front screen.
7. That’s it, your ceiling speaker has been successfully installed.

CAUTION
When using an electrical screwdriver, make sure the torque is not high. Excessive torque could cause complications for your installation and the product.

Access the product on our website:

Technical characteristics

• RMS POWER__ 40 WATTS
• PROGRAM POWER_____  80 WATTS
• NOMINAL IMPEDANCE__ 4 Ohms or 8 Ohms
• FREQUENCY RESPONSE___ 40Hz to 18.000Hz
• RESONANCE FREQUENCY_____ 56,911 Hz
• WEIGHT__ 1.65lb (0,75Kg)

Product dimensions

Installation suggestion
1x Taramps THS 6000 + 4x Taramps 4 Ohm Ceiling Speakers + 1x 200 Watts RMS Passive Subwoofer

NOTE: Characteristics, specifications, and aesthetic aspects are subject to change without prior notice.

Manufactured by: TARAMPS ELECTRONICS LTDA – TAX ID: 11.273.485/0001-03 – Street: João Silvério, 121 • Res. Manoel Martins – Alfredo Marcondes – SP – Brazilian Industry
+55 18 3266-4050 www.taramps.com.br

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>