REDRAGON KING PRO Wireless Ultra Light Weight E-Sport Grade Gaming Mouse User Manual
- August 21, 2024
- REDRAGON
Table of Contents
KINGPro
WIRELESS ULTRA LIGHT-WEIGHT
E-SPORT GRADE GAMING MOUSE
KING PRO Wireless Ultra Light Weight E-Sport Grade Gaming Mouse
Wireless Ultra Light-weight E-sport Grade Gaming Mouse Operating Instructions
Dear user
‘Thank you for choosing our product. To protect your rights and for better
customer service, we ask that you note our warranty rules.
- Within guaranty period, repair is guaranteed for failure due to electrical circuit problems. Other damages,such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such asfire, flood, or earthquake are not included.
- Consumable parts (such as foot pad) and spare parts replacement are not included in ourwarranty.
Button Instructions
- Left mouse button
- Right mouse button.
- Scroll wheel (clicked as middle mouse button).
- Side key, defaulted forward.
- Side key, defaulted backward.
- DPIbutton.
- Power button: 2.4G/OFF/BT buton.
- Teflon foot pads: Large wear-resistant materias let the mouse move more smoothly.
Basic Operation:
How to Connectthe Mouse with a Computer
- Take out the USB to USB.C cabl nthe package and connect he mouse with your computer.
- Slide the power switch on the bottom o the mouseat any mode(24G/OFF/BT), The mouses under recharging
- The computer willecognize and configure the movse automatially ot wired mote,
- The mouse will e eady for use when the configuration’s fnshec,
2.4G wireless pairing
- Slide the power switch on bottom of the mouse to 2.4G.
- Take out the USB receiver i the package and plug it into any available USE port Your computer, please note that the USE receiver can be storage on the bottom of mouse
- Press any button on mouse, the computer will recognize and configure the keyboard automatically.
BT pairing
- Slide the power switch on bottom of the mouse to BT.
- Press button 1 + 5 Qand hold for 3 seconds, switch on PC or tablet BT, search the mouse as BT5.1 mouse, press it for pairing.
Auto sleep and power save function
The gaming mouse will be sleep mode if it is out of work in 1 minutes, please move the mouse or press any key to wake it up.
How to Recharge the Battery
- The scroll wheel light will flash in red when battery is low, you need to recharge the mouse now.
- Take out the USB to USB C cable and connect the mouse and any USB power output port.
- Charging time is around 4 hours.
- Note: Slide the power switch on the bottom of the mouse to OFF for long term storage.
CAUTION: DO NOT CHARGE THE MOUSE BY WALL PLUG, INPUT VOLTAGE MAX 7V.
DPI adjustment and indication
DPI indicator light: Behind the Scroll Wheel key, there is a DPI indicator
light.
Red —— Gear 1 (1000 DPI)
Blue —— Gear 2 (2000 DPI)
Green —– Gear 3 (4000 DPI)
Purple —- Gear 4 (8000 DPI)
Yellow —- Gear 5 (26000 DPI)
Report rate adjustment
Press and hold scroll wheel button + Forward button to switch the report
rate in 125HZ/250HZ/500HZ/1000HZ , the report rate is avaialble to adjust in
software( Not available at BT mode).
FAQ
- If the mouse is not responding, please check whether the mouse is plugged correctly in the corresponding computers USB port, or try another USB ports
- If the mouse is moving slowly, jumping or with delay, please try another surface. Dark, dirty, unflat, bright surfaces may affect the performance of mouse. Mouse pad strongly recommended.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occurina particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference. (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
BATTERY SAFETY GUIDELINES
DO NOT replace the battery with a different model.
DO NOT use this product if the battery shows signs of damage including, but
not limited to tearing, deformation, leakage, or the smell of electrolytic
material.
DO NOT touch the battery fi material is leaking and seek immediate medical
attention if any material comes into contact with your skin or eyes.
DO NOT expose the battery to liquid, heat sources, electricity (outside of the
product itself), or other non-standard operating condition.
DO NOT remove the battery except for proper disposal and recycling as required
by local laws and regulations.
DO NOT impact, bend, alter, dissemble, or otherwise damage the battery as the
contents are volatile, hazardous, and can be harmful.
CAUTION
Failing to follow all safety guidelines may result product damage, explosion,
fire, and/or electric shock.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference. (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>