TARAMPS T 1200SW Alto Falante Subwoofer User Guide
- May 15, 2024
- TARAMPS
Table of Contents
TARAMPS T 1200SW Alto Falante Subwoofer
Product Information
- Specifications
- Electrical Parameters
- RMS Power: 300 + 300 W
- Musical Program Power: 600 + 600 W
- Nominal Impedance: 4+4 Ohms
- Resistance (RE): 2.8 + 2.8 Ohms/VCC
- Sensitivity (@ 1W, 1m)-Free-Air: 83.826 dB
- Diaphragm Mass (MMD): 62.212 g
- Mechanical Parameters
- Nominal Diameter: 8 Inches
- Ferrite Measures: 134 x 56 x 32mm
- Coil Diameter: 2 Inches
- Coil Height: 29 mm
- Coil Wire Material: Copper
- Coil Wire Section: Round
- Coil Shape: Kapton (Kapton trademark registered by DUPONT)
- Gap Height: 9 mm
- Housing Material: Aluminium
- Ferrite Material: Barium
- Weight: 5.376 Kg
- Volume Occupied on the Cabinet: 1.581 Liters
- Connector Type: Post
- Cabinets Suggestion
- Model: Vented Box
- Volume Liters: 28
- Ducts Quantity: 02
- Ducts Diameter: 3(POL)
- Ducts Depth: 550 mm
- Sintony: 41 Hz (H.P.F), 45 Hz (H.P.F)
- Attenuation (Active): 12 dB/ Octave, 12 dB/ Octave
- Note: Features, specifications, and appearance are subject to change without notice.
Product Usage Instructions
- Connection
- Connect the speaker to the amplifier using the appropriate cables. Ensure correct polarity for optimal performance.
- Cabinet Setup
- Place the speaker in a vented box with a volume of 28 litres as suggested. Ensure proper duct quantity, diameter, and depth for optimal sound quality.
FAQs
- Q: Can I use this speaker with any amplifier?
- A: It is recommended to use this speaker with an amplifier that matches the nominal impedance for best results.
- Q: What is the recommended power input for this speaker?
- A: The RMS power is rated at 300 + 300 W, and the musical program power is rated at 600 + 600 W.
- Q: How should I position the speaker for optimal sound?
- A: Position the speaker at ear level and ensure it is facing towards the listening area for the best sound experience.
SPEAKER – 8″ – 4+4 OHMS
- The 8” T 1200SW is the perfect subwoofer for lovers of powerful and impactful bass.
- With the capacity to support 600 WRMS and up to 1200 Watts in musical programs, this subwoofer provides an immersive sound experience, with deep and clearly defined bass.
- Its cellulose cone and foam border ensure not only exceptional performance but also superior durability.
- The T 1200SW is available in two dual coil versions (D2 and D4), offering greater amplifier compatibility and flexibility when building your sound system.
- Choose between white or black frame options to customize the look of your project.
- Elevate your listening experience with the powerful T1200 SW from Taramps.
ELECTRICAL PARAMETERS
- RMS POWER_____ 300 + 300 W
- MUSICAL PROGRAM POWER___ 600 + 600 W
- NOMINAL IMPEDANCE_____ 4+4 Ohms
- RESISTANCE (RE)_____ 2,8 + 2,8 Ohms/VCC
- NO (EFFICIENCY REFERENCE)_____ 0,15 %
- SENSITIVITY (@ 1W, 1m)-Free-Air__ 83,826 dB
- DIAPHRAGM MASS (MMD)_____ 62,212 g
- TOTAL MASS (MMS)__ 63,945 g
- BL PRODUCT____ 12,350 TM
- MECHANICAL Q (Qms)_____ 7,682
- ELECTRIC Q (Qes)____ 0.899
- TOTAL Q (Qts)____ 0,805
- COMPLIANCE (CMS)__ 119,678u M/N
- EQUIVALENT VOLUME (VAS)___ 7,400 L
- FREQUENCY RESPONSE__ 35Hz to 2500z
- RESONANCE FREQUENCY_____ 57,532Hz
- Le @ 1 kHz (coil inductance at 1kHz)_____ 0,953 mH
- EFFECTIVE CONE AREA (SD)__ 0,0208 M²
- CONE EXCURSION WITHOUT DISTORTION (X MAX)___ +- 13 mm
- FLOW DENSITY IN THE GAP___ 10.000 GAUSS
Thielle-Small parameters are obtained after applying a sinusoidal level of 50hz for 30 minutes. A tolerance of + – 15% on the specified values is allowed.
MECHANICAL PARAMETERS
- NOMINAL DIAMETER__ 8 Inches
- FERRITE MEASURES_____ 134 X 56 x 32mm
- COIL DIAMETER__ 2 Inches
- COIL HEIGHT____ 29 mm
- COIL WIRE MATERIAL_____ Copper
- COIL WIRE SECTION__ Round
- COIL SHAPE_____ Kapton
- GAP HEIGHT_____ 9 mm
- FERRITE MATERIAL___ Barium
- WEIGHT_____ 5,376 Kg
- VOLUME OCCUPIED ON THE CABINET__ 1,581 Liters
- CONNECTOR TYPE___ Post
Kapton trademark registered by DUPONT
PRODUCT DIMENSIONS
CABINETS SUGGESTION
MODEL| VOLUME| DUCTS| DUCTS| DUCTS| SINTONY|
(H.P.F)| ATTENUATION
---|---|---|---|---|---|---|---
LITERS| QUANT.| DIAM.| DEPTH| | | (ACTIVE)
VENTED BOX| 28| 02| 3″(POL)| 550 mm| 41 Hz| 30 Hz| 12 dB/ Octave
28| 02| 3″(POL)| 450 mm| 45 Hz| 30 Hz| 12 dB/ Octave
NOTE: Features, specifications and appearance are subject to change without notice.
SPEAKER – 8″ – 2+2 OHMS
- Response curve in a 28l box tuned to 41 Hz in an anechoic chamber, 1W / 1M. Impedance curve Free-Air.
- The 8” T 1200SW is the perfect subwoofer for lovers of powerful and impactful bass. With the capacity to support 600 WRMS and up to 1200 Watts in musical program, this subwoofer provides an immersive sound experience, with deep and clearly defined bass.
- Its cellulose cone and foam border ensure not only exceptional performance but also superior durability.
- The T 1200SW is available in two dual coil versions (D2 and D4), offering greater amplifier compatibility and flexibility when building your sound system.
- Choose between white or black frame options to customize the look of your project.
- Elevate your listening experience with the powerful T1200 SW from Taramps.
ELECTRICAL PARAMETERS
- RMS POWER_____ 300 + 300 W
- MUSICAL PROGRAM POWER___ 600 + 600 W
- NOMINAL IMPEDANCE_____ 2+2 Ohms
- RESISTANCE (RE)_____ 1,5 + 1,5 Ohms/VCC
- NO (EFFICIENCY REFERENCE)_____ 0,19 %
- SENSITIVITY (@ 1W, 1m)-Free-Air__ 84,751 dB
- DIAPHRAGM MASS (MMD)_____ 60,391 g
- TOTAL MASS (MMS)__ 62,124 g
- BL PRODUCT____ 9,556 TM
- MECHANICAL Q (Qms)_____ 8,297
- ELECTRIC Q (Qes)____ 0.74
- TOTAL Q (Qts)____ 0,68
- COMPLIANCE (CMS)__ 125,684u M/N
- EQUIVALENT VOLUME (VAS)___ 7,771 L
- FREQUENCY RESPONSE__ 35Hz to 2500z
- RESONANCE FREQUENCY_____ 56,958Hz
- Le @ 1 kHz (coil inductance at 1kHz)_____ 0,652 mH
- EFFECTIVE CONE AREA (SD)__ 0,021 M²
- CONE EXCURSION WITHOUT DISTORTION (X MAX)___ +- 13 mm
- FLOW DENSITY IN THE GAP___ 9300 GAUSS
Thielle-Small parameters are obtained after applying a sinusoidal level of 50hz for 30 minutes. A tolerance of + – 15% on the specified values is allowed.
MECHANICAL PARAMETERS
- NOMINAL DIAMETER__ 8 Inches
- FERRITE MEASURES_____ 134 X 56 x 32mm
- COIL DIAMETER__ 2 Inches
- COIL HEIGHT____ 29 mm
- COIL WIRE MATERIAL_____ Copper
- COIL WIRE SECTION__ Round
- COIL SHAPE_____ *Kapton
- GAP HEIGHT_____ 9 mm
- HOUSING MATERIAL__ Aluminium
- FERRITE MATERIAL___ Barium
- WEIGHT_____ 5,376 Kg
- VOLUME OCCUPIED ON THE CABINET__ 1,581 Liters
- CONNECTOR TYPE___ Post
Kapton trademark registered by DUPONT
CABINETS SUGGESTION
MODEL| VOLUME| DUCTS| DUCTS| DUCTS| SINTONY|
(H.P.F)| ATTENUATION
---|---|---|---|---|---|---|---
LITERS| QUANT.| DIAM.| DEPTH| | | (ACTIVE)
VENTED BOX| 28| 02| 3″(POL)| 550 mm| 41 Hz| 30 Hz| 12 dB/ Octave
28| 02| 3″(POL)| 450 mm| 45 Hz| 30 Hz| 12 dB/ Octave
PRODUCT DIMENSIONS
CONTACT
- Manufactured by: TARAMPS ELECTRONICS LTDA
- TAX ID: 11.273.485/0001-03
- KM 30 Júlio Bidisk Hwy,
- Da pedreira Neighborhood,
- Alfredo Marcondes,
- SP – 19180-000, Brasil
- Made in Brazil
- +55 18 3266-4050
- www.taramps.com.br.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>