FAFREES 20F054 Smart EV Moped Foldable Electric Bike User Manual

FAFREES 20F054 Smart EV Moped Foldable Electric Bike

Smart EV/Moped – Model: 20F054

Product Information

The Smart EV/Moped is a high-performance electric vehicle designed for urban commuting. It features a sleek design, advanced technology, and user-friendly controls. With a powerful motor and long-lasting lithium battery, this EV/Moped offers a smooth and efficient ride. The product comes with a display that provides real-time information about speed, battery level, distance, and more. It is equipped with safety features such as a brake lever, headlights, and a bell. The Smart EV/Moped is built to provide a comfortable and enjoyable riding experience.

Product Usage Instructions

Precautions:

• Ride at a maximum speed of 15km/h on downhill and non-brick pavement.
• Avoid bumping the motor vigorously and keep the spindle lubricated.
• Do not exceed the maximum load of 120kg.
• After use, park the EV/Moped in accordance with safety regulations.
• Avoid one-handed riding for safety.

Battery and Charging:

• Make sure to check if the battery is switched on before riding.
• To turn on the battery, lock it first and then turn it on.
• Charge the lithium battery using the provided charging hole.

Riding:

• Use the speed shifter to adjust the speed.
• Operate the brake lever for safe braking.
• Utilize the thumb throttle for easy acceleration.
• Observe the speed stage indication on the left handlebar.

Folding Operation:

Refer to the folding operation illustration provided in the user manual for detailed instructions on how to fold the Smart EV/Moped.

Display Operation:

• The LCD display shows real-time speed, pedal assist level, motor power, total distance, battery level, calories burnt, single trip distance, max speed, error codes, average speed, and setup menu.
• Use the + and – buttons to adjust settings or increase/decrease speed.
• The display also features a USB charging port with a protective rubber plug.

Product Parameters:

The Smart EV/Moped has specific dimensions, performance capabilities, and electrical specifications. Please refer to the product manual for detailed information.

Disclaimer:

Maintenance and care of the Smart EV/Moped are essential for optimal performance. Regularly check and maintain the speed shifter, sprocket, brake lever, folding pedal, chain, drive motor, rear derailleur, standpipe, rear fender, headlight, brake, and other components. Follow safety regulations and guidelines for proper parking and usage.

Congratulations on your purchase!

Please write down your frame number in the blank space below in case of future need.

Precautions

Battery and charging:

Charging is only allowed at 0°C~45°C, and discharging is only allowed at -20°C~60°C. The battery must be kept dry. It is strictly prohibited to put the battery in acidic or alkaline liquid. Rain must be avoided, and it shall be kept away from fire, heat, and high-temperature environments. It is strictly prohibited to reverse the battery’s positive and negative poles or damage them, plug in the battery or let it suffer from a short circuit. Please use the original special charger when charging. The charging must not last more than 6 hours, and the charging current does not exceed 2A. When not in use for a long time, please keep the battery in a cool and dry place, and charge it for five hours every month. Users must follow the instructions when charging, otherwise, they will be at their own risk. Attention shall be paid to the type of battery to which the charger is compatible and the applicable voltage, and mixing is strictly prohibited. When charging, it shall be placed in a ventilated environment. It is strictly prohibited to charge in a residential building and in an enclosed space or in a hot environment. When charging, insert the battery first, and then supply the mains power; when fully charged, cut off the mains power first, and then unplug the battery connector. When the green light is on, the power shall be cut off in time. It is forbidden to connect the charger to the AC power supply without loading it for a long time without charging. During the charging process, if the indicator light is abnormal, a peculiar smell occurs, or the charger case is overheating, stop charging immediately and repair or replace the charger. During the use and storage of the charger, be careful not to let foreign matter enter, especially avoid inflow of water or other liquids, so as to avoid short circuits inside the charger. The charger should not be carried with the vehicle. If it is necessary to carry it, it shall be placed in the toolbox after shock absorption treatment. Do not disassemble or replace the accessories in the charger by yourself.

Riding:
Do not use it until you have read the instructions carefully to understand the performance of the product; do not lend it to anyone who does not manipulate the product. Before riding, check if the brakes are working. When braking, please apply the rear brake first, and then apply the front brake. Pay attention to the tightness of the brakes. When you find that the brakes are too loose, you can use an internal hexagonal wrench to tighten it. Note that the braking distance shall be increased when you are riding in rain or snow. Applicable age: 16 to 65 years old. Be sure to wear a safety helmet while riding it, follow the traffic rules, and do not drive on motorized lanes and roads with many pedestrians. Please check the tire pressure before riding. The recommended tire pressure is 40~65PSI.
The speed at downhill and non-brick pavement does not exceed 15km/h. Be careful not to bump the motor vigorously when it is used, and keep the spindle lubricated.Do not ride at more than the maximum load of the car body (maximum load:

120kg). After use, the car cannot be parked in the building’s entrance hall, evacuation stairs, or emergency exit. It must be properly parked in accordance with safety regulations.
No one-handed riding!

Disclaimer:

• After riding, please place the vehicle in a place free from sunlight and rain, not in a residential building;
• Check the motor and brake frequently;
• Check the screws of the vehicle and the places to be tightened regularly, and tighten them regularly.

Recommended torque: (unit: kgf.cm) handlebar screws 60-80, stem screws 175-200, seat screws 175-200, and wheel screws 320-450;
The front and rear wheels of the vehicle shall be located in the center of the fork or frame;
Check the spell frequently for any scars, cracks, or excessive wear. The inner tube and the air nozzle shall be perpendicular to the hub. The cover tyre that is damaged or excessively worn needs to be replaced immediately, please ask a professional technician to replace your tyre. If your cover tyre accidentally punctures and leaks, please contact a professional technician to repair or replace it.

Maintenance and care

For the product model, specifications or related information mentioned in this Operation Manual, the company reserves the right of modification and final interpretation; the functions of the specific model mentioned in this Operation Manual are only applicable to that specific model; The product models, specifications, or related information mentioned in the Operation Manual may be changed without notice; without prior written permission of the company, the Operation Manual may not be copied, modified, reproduced, transmitted, or published in any form. Please read the Manual carefully before using the product, and operate in accordance with the Manual, otherwise, the company will not be liable for product damage or personal or property damage caused by improper use or error.

1. Speed shifter
2. Brake lever
3. Display
4. Standpipe adjustment quick-release
5. Standpipe
6. Standpipe folding quick-release
7. Headlight
8. Brake
9. Tyre
10. Hub
11. Front fork
12. Front fender
13. Frame folding quick-release
14. Sprocket
15. Folding pedal
16. Chain
17. Drive motor
18. Rear Derailleur
19. Rear fender
20. Lithium battery
21. Rear hanger
22. Seat tube adjustment quick-release
23. Seat tube
24. Saddle
25. Battery charging hole
26. Battery switch

Function introduction

1. Charging: Referring to Figure 2, open the plastic cover on the left side of the frame, and you can see the charging hole; connect the charger to start charging; when the battery capacity is displayed to be full, and the charger indicator light changes from red to yellow-green, it means the battery is fully charged.
2. Turn on: Referring to Figure 3, press and hold the “i” key to turn on/off the power.
3. Battery indicator: The instrument panel lights up after power-on. The battery is displayed in four grids, corresponding to high, medium, and low batteries.
4. Headlight: Referring to Figure 3, press and hold the “+” key to turn on/off the headlight.
5. Power-assisted riding: Step on the vehicle pedals, and start the electric power automatically after a certain speed is gained. If no power is needed, turn off the power or the battery.
6. Power riding: Press the thumb throttle, and start the electric power automatically. If no power is needed, turn off the power or the battery.
7. Speed change: Referring to Figure 4, turn the speed change shifter while the vehicle is moving to achieve speed change from gear 1 to gear 7.
8. Cruise Control: Cruise Control will be triggered when you hold the thumb throttle for 8 seconds at the same speed, and it will be released by braking/pedaling or throttling.

First-Time Operation Instruction

Step 4: Long press the “i” button to turn on the display. Press the “+” button to INCREASE THE SPEED.

Folding Operation Illustration

Product Parameters

Remarks: electric quantity, load, tyre pressure, pavement environment, chain, and axle lubrication degree, etc. will affect the maximum speed; the endurance mileage is measured at a load of 60kg and a speed of 15~25km/h on flat and hardened roads under continuous testing from 100% power capacity to 0% power capacity; driving habits, temperature, load, tire pressure, pavement environment, and other factors will affect the endurance mileage

Display Operation

• Parts description

1. 77” LCD display
2. Mounting Bracket
3. +”Button
4. “i” Display function button
5. “-” Button
6. USB charging port with protective rubber plug

Technical Data

• Rated operating voltage: 24V / 36V / 48 V DC
• USB port output: 5V, 1000mA
• Operating temperature: -20°C ~ +45°C
• Storage temperature: -20°C ~ +45°C

Displayed Information

• Real-Time: Speed Yes Pedal Assist Level Yes
• Real-Time: Motor Power Digital and Graphical Total Distance Yes
• Battery Level: Graphical Calories Burnt Yes
• Single Trip Distance: Yes(Reset-able) Light Indication Yes
• Max Speed: Yes(Reset-able) Error Code Yes
• Average Speed: Yes(Reset-able) Setup Menu Yes

Conformities
IP-Level IPX5 (USB Cap Closed)

• Installation

1. Use M3 Hex Socket Screw 1 to secure the mounting bracket to the left side of the handlebar. Tightening torque: 0.2N.m. Do Not Overtighten or it may cause damage to the display.
2. Securely connect the cables of the display with the E-bike controller by aligning the 2 arrow marks.

Meter Interface

Button functions
1. “+” button:

2. “-” button:

Decrease

| —-| —-

3. “i” button:

4. Press “+” and “-” buttons together:

System Operations

1. Press and hold “+” and “-” together for 2 seconds to enter the system menu.
2. Use “+” / “-” to navigate to the options and press “i” to confirm.
3. Use “+” / “-” to adjust parameters.
4. Press “i” to confirm the adjustment and back to the previous menu.
5. Back to the user interface after all adjustments are set.
6. Turn off the display to activate the adjustments.

• Error-Code Notification

MANUFACTURER INFORMATION

• Manufacturer: GUANGZHOU SYMBOL BICYCLE CO., LTD.
• Address: GaoTian Industrial District, Taiping Town, Conghua District,Guang Zhou, China

COPYRIGHT © FAFREES. ALL RIGHTS REVERSED.

Visit www.fafreesebike.com or contact support@fafreesebike.com for more information and after-sales service.

References

• kgf.cm
• Fafrees Ebike

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>