FAFREES F20 Electric Bike User Manual

F20 Electric Bike
User Manual

F20 Electric Bike

Congratulations on your pirchase !
Please write down your frame number in the blank space below in case of future need.

Product Safety Notice

| Don’t Ride Until You Read This:
---|---
| Always wear a helmet when riding your electric bike.
| Keep the two keys properly. If the unique keys are lost, you will not be able to turn on the bike or replace the battery. If necessary, you should get more spare keys（We don’t have a backup key）
| Make sure your electric bike has a full battery before taking it out to ride.
| Always be aware of local road laws, and follow them.
| Do not ride the bike under the influence of drugs or alcohol.
| Always respect pedestrians.
| Do not ride under wet conditions. The electric bike may slide from under your feet causing injury. Wet conditions may damage the electronics and void the warranty.

Warning Message

1. Avoid water – The electric bike is not waterproof. The electronics may be damaged due to water and water damage is not covered by our warranty. Riding in wet conditions is also very dangerous and may result in injury.
2. Avoid prolonged exposure to sun or rain and avoid storage in places with high temperatures or corrosive gas.
3. Abuse – We do not cover physical damage due to negligent care and extreme riding.
4. Whenever you ride the electric bike, you risk severe injury or even death from loss of control, collisions, and falls. Use caution and ride at your own risk.
5. Do not modify the product from the manufacturers original design.
6. Do not exceed the posted speed limit and obey all traffic laws.
7. Avoid touching the charging port directly and do not let it make contact with a metal object.
8. Keep hands and all body parts away from moving parts while operating the electric bike.
9. Before riding – be sure to check the electric bike over and make sure the electric bike is operating correctly before each use.
10. Before riding – be sure to check that the braking system is functioning properly; also be sure to check that all safety labels are in place and you understand the safety warnings.
11. Before riding – be sure that any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition.
12. Before riding – be sure to check that the tires are in good condition, inflated properly, and have sufficient tread remaining.
13. Never exceed the 330 lbs (150kg) maximum load rating.
14. The electric bike should never be used by children under the age of 18.
15. Maximum Speed – Your electric bike goes the maximum speed of 25 km/h.
16. Make note that additional insurance may be required to cover situations you encounter while riding an electric bike. It is recommended that you contact an insurance company or broker for advice and consultation.
17. To conserve electricity , use assist mode and avoid zero starting, frequent braking, driving against the wind, carrying heavy loads including other people and riding with insufficient air pressure.

Package Contents

Carefully check package contents, if anything is missing or damaged, please contact FAFREES customer service for support. support@fafreesebike.com

Product Overview

Assembly

Visit www.fafreeseblke.com for additional help with assembly,including a step-by-step video walk-through. If you do not feel comfortable assembling the bike yourself, we recommend taking your new bike to a bike shop for assembly and inspection. If you are willing to assemble the bike yourself, be sure to follow all instructions, properly adjust gears and brakes, and set tire pressure.

1. Be careful not to position your fingers between the latch and the frame. Doing so may result in injury.
2. Unfold the rear wheel/ section and hold your e-bike upright with the kickstand. Push the latch closed so that it’s parallel with the bike’s frame then turn the latch lock down towards the latch to lock it in place.
3. Open the kick stand and place the entire bike.

1. Tum the handle up in the direction of the arrow.| 2. Push the latch in the direction of the arrow to open the locking mechanism.| 3. Fold the handlebar perpendicular to the ground.

4. Tighten the screws to fix the handlebar in place.| 5. Erect the riser and press the handle in the direction of the arrow to lock it.| 6.Adjust the height of the handlebar to an appropriate position.

For better pedaling, safety and overall riding comfort, positioning the seat at the right height is important. The rider’s leg length is used to determine the seat’s position. When you pedal, your hips should remain level and your legs should be almost fully extended at the bottom ofthe pedal stroke, but not over-extended. To determine the right seat height, sit on the E-bike with one pedal at its lowest point and place the ball of your foot on the pedal. Your leg should be almost fully extended(not lockedout) with a slight bend at the knee.

Open the quick release lever by swinging the lever open and outward fully.| Move the seat up and down by sliding the seatpost in or out of the seat tube.

Adujst the seat and the head of the seat is parallel with the top tube.

| Close the quick release lever using your palm or finger.

Locate the right-side/ left side pedal, which is marked “R,” “Lfshould have an “R””L,” sticker attached.| Thread the right pedal onto the right crank gently by hand, turning clockwise. Then tighten pedal by alien wrench.

Thread the left pedal onto the left crank gently by hand, turning counter- clockwise. Then tighten pedal by alien wrench.| Check the chain alignment. Rotate the right pedal and crank toward the back of the bike as though pedaling backward. Watch the chain and ensure the chain runs through the drivetrain (the rear cog, chain tensioner, and around the front chainring) smoothly.

Battery Key Positions

Familiarize yourself with the key port and key positions before riding the bike. The photo below shows the key port aligned in key position 1, in line with the ON icon. In key position 1, the battery is in the “on” position, with the battery locked to the frame, and the key can’t be removed.

• Anytime the battery is in key position 1, (on, locked to the frame) the display power button will turn the bike on and off, but the battery cannot be removed.
• If the battery is in key position 2, (off, locked to the frame) no buttons or controls can be activated, the bike will remain off, and the battery cannot be removed.
• Anytime the battery is in key position 3, (off, unlocked from the frame) the battery must be removed from the bike before moving or riding the bike. The key can be removed from battery.

NOTICE: You have to press the key then you can switch to unlock position

Start-up procedure

After the bike has been properly assembled according to the assembly video, all components are secured correctly, a certified, reputable mechanic has checked the assembly, and you have read this entire manual, turn on the bike and select a pedal assist level following the steps below:

1. Test the battery lock security. Ensure the key port is aligned with the OFF icon, which indicating the battery is off and locked onto the frame mount. Carefully use both hands to pull up on the battery to test that the lock is secure.
2. Ensure proper handlebar and seat adjustment. Note that lowering the seat so the rider can put one or both feet flat on the ground without dismounting from the seat may offer a safer and more comfortable introduction to operating the bike. Ensure the handlebar faceplate bolts and seatpost quick release are fully and properly secured.
3. Tum the bike on/off. Insert the key and turn clockwise to the ON position. Locate the LCD Display (near the left handlebar grip). Press and hold the center power button “M” for approximately 3 seconds to turn on/off the bike.
4. Front light:Long press the “+” button to turn on/off the front light.
5. Select the desired level of pedal assistance (PAS) between level 0 through 3 using the + and- on the display remote. Level 1 corresponds to the lowest level of pedal assistance, and level 3 corresponds to the highest level of pedal assistance. Level 0 indicates pedal assistance is inactive. Start in PAS level 0 or 1 and adjust from there.
6. Begin riding carefully. With the proper safety gear and rider knowledge, you may now operate your bike. On a flat surface, in a low gear (1 or 2), most riders should be able to begin pedaling the bike with pedal assist level 0 or 1. You may also use the throttle to accelerate and maintain your desired speed.
7. The throttle is used by slowly and carefully press the throttle downward. Do not use the throttle unless you are on the bike.

Do not use the throttle while dismounted. Avoid accidental application of the throttle while dismounted; anytime you are moving the bike while dismounted, ensure the bike is powered off to prevent accidental application of the throttle.
Remove the battery

For your convenience, the bike battery can be removed.

Locate the seat quick release lever and turn over the saddle.| Press and rotate the key to the UNLOCK icon.| Carefully slide the battery upwards and lift it off the frame.

To reinstall the battery, align the slot at the bottom of the battery and reinsert it into the frame. Turn the key to the locked position.
If you want to know the battery level without turn on the bike, long press the button on the top of the battery to display the current capacity.

Charge Your E-Bike

Before using the electric bike, you must fully charge the battery.

1. Ensure the battery is off, by rotating the key to align with the off icon.
2. Remove the rubber cover on the charging port on the opposite side of the battery from the key switch.
3. Plug the charger into the battery’s charging port. With the battery on or off the bike, place the charger in a flat, secure place, and connect the DC output plug from the charger to the charging port on the side of the battery.
4. Plug the charger into a power outlet, charging should initiate and will be indicated by the LED charge status lights on the charger turning red. Once fully charged, the charging indicator light turning green. Unplug the charger from the wall outlet first and then remove the charger output plug from the battery charging port.

| The battery can be charged off the bike. To remove the battery, turn the key to the UNLOCK position.
(see the previous remove battery section for details),
Then carefully pull the battery up until the battery detaches from the receptacle.
---|---
Remove the rubber cover on the charging port on the opposite side of the battery from the key switch. Connect the DC output plug from the charger to the charging port on the side of the battery.
Plug the charger into a power outlet, charging should initiate and will be indicated by the LED charge status lights on the charger turning red. Once fully charged, the charging indicator light turning green. Unplug the charger from the wall outlet first and then remove the charger output plug from the battery charging port.

Display and Setting

TRIP: This number shows distance data for a single trip. Data is automatically cleared when the bike is powered off.
ODO: This number shows odometer data(i.e., cumulative distance)
TIME: This number shows driving time for a single trip. Data is automatically cleared when the bike is powered off.
POWER ASSISTED Level: 0,1,2,3: Displays the current power assisted level.

Display Control

display is turned on

Personalized Setting
Setting Mode: When the bike is on, press and hold + and – buttons at the same time to enter the setting mode. Press M to confirm and enter the next setting, press + or – to change the parameters.
Set speed unit
Press the M button to enter the P1 setting interface, and press the + or – button to switch the values. If you select 0, it is KM/H, and if you select 1, it is MPH. After setting, press the M button several times to exit the setting interface.
Setting wheel diameter
Press the M button to enter the P2 setting interface, and press the + or – button to switch values. After setting, press the M button several times to exit the setting interface.

Daily Care and Maintenance

Cleaning and Storage
If you see stains on the bike body, wipe them off with a damp cloth. If the stains won’t scrub off, put on some toothpaste, and brush them with a tooth brush, then wipe them off with a damp cloth.
Notes: do not clean the bike with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to prevent dire damage. Do not wash the bike with a high-pressure water spray. During cleaning, make sure that the bike turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems. When the bike not in use, keep it indoors where it is dry and cool between 14°F and 104°F.
In extremely humid environments the interior of the bike may suffer condensation or even water accumulation, which may damage the battery rapidly.
Battery Maintenance

1. Use original battery packs, use of other models or brands may bring about safety issues;
2. Do not touch the contacts. Do not dismantle or puncture the casing. Keep the contacts away from metal objects to prevent short circuit which may result in battery damage or even injuries and deaths;
3. Use original power adapter to avoid potential damage or fire;
4. Mishandling of used batteries may do tremendous harm to the environment.
5. After every use, fully charge the battery to prolong its life span.
6. Try to avoid recharging the bike after completely exhausting the battery. If the Battery power is low, charge it as soon as possible.
7. Charge the battery every month if it is not in use.

Troubleshooting

| Symptoms| Possible Causes| Most Common Solutions
---|---|---|---
1| The bike does not work| 1. Insufficient battery power
2. Faulty connections
3. Battery not fully seated in tray
4. Improper turn on sequence
5. Brakes are applied
6. Blown discharge fuse| 1. Charge the battery
2. Clean and repair connectors
3. Install battery correctly
4. Turn on bike with proper sequence
5. Disengage brakes
6. Replace discharge fuse
2| Irregular acceleration and/or reduced top speed| 1. Insufficient battery power
2. Loose or damaged throttle
3. Misaligned or damaged magnet ring| 1. Charge or replace battery
2. Replace throttle
3. Align or replace magnet ring
3| The motor does not respond when the bike is powered on| 1. Loose wiring
2. Loose or damaged throttle
3. Loose or damaged motor plug wire
4. Damaged motor| 1. Repair and or reconnect
2. Tighten or replace
3. Secure or replace
4. Repair or replace
4| Reduced range| 1. Low tire pressure
2. Low or faulty battery
3. Driving with too many hills, headwind, braking, and/or excessive load
4. Battery discharged for long period of time without regular charges, aged, damaged, or unbalanced
5. Brakes rubbing| 1. Adjust tire pressure
2. Check connections or charge battery
3. Assist with pedals or adjust route
4. Balance the battery; contact tech support if range decline persists
5. Adjust the brakes
5| The battery will not charge| 1. Charger not well connected
2. Charger damaged
3. Battery damaged
4. Wiring damaged
5. Blown charge fuse| 1. Adjust the connections
2. Replace
3. Replace
4. Repair or replace
5. Replace charge fuse
6| Wheel or motor makes strange noises| 1. Loose or damaged wheel spokes or rim
2. Loose or damaged motor wiring| 1. Tighten, repair, or replace
2. Reconnect or replace motor.

Specifications

| ITEM| SPECIFICATIONS
---|---|---
Dimensions| Product Dimensions| 17460118cm
Package Dimensions| 883873cm
Tire Size| 20″*3.0 fat tire
Performance| Max Load| 330 lbs (150kg)
Maximum Speed| 25km/h
Product Weight| 26kg
Package Weight| 30.7kg
Operation Temperature| -15°C – 40°C
Electronics| Battery Type| Lithium-ion battery
Battery Capacity| 16AN
Rated Battery Voltage| 36V
Motor Power| 250W
Rated Motor Voltage| 36V
Charging Time| 7-8h
Charging Voltage| 42V/1.5A
Input Voltage| 100-240V
Under-voltage Protection Value| 28-30V
Features| Display| Multi- functional LCD Display
Front light| Yes
Brake method| Disc brakes
Speed transmission| 7 Speed

COPYRIGHT◎2022 FAFREES. ALL RIGHTS RESERVED.
Visit www.fafreesebike.com or contact support@fafreesebike.com for more information and after-sale service.

MANUFACTURER INFORMATION
Manufacturer: Guangzhou Gedesheng Electric Bike Co.,Ltd.
Address: No.105, Commercial Street, Guangtang Village,
Xinya Street, Huadu District, Guangzhou, Guangdong, China

References

• Fafrees Ebike

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>