denver BTH-235B Accessories Headphone Instruction Manual

denver BTH-235B Accessories Headphone

Safety information

Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.
2. Warning: This product includes lithium polymer batteries.
3. Keep products out of the reach of children and pets to avoid chewing and swallowing.
4. Product operating and storage temperature is from 0 degrees Celsius to 40 degrees Celsius. Under and over this temperature might affect the function.
5. Never open the product. Touching the inside electrics can cause electric shock. Repairs or services should only be performed by qualified personnel.
6. Do not be exposed to heat, water, moisture, or direct sunlight!
7. Please remove the earphones in case of any leakage or excessive heat from the product to avoid burns or rash.
8. Please protect your ears against loud volume. Loud volume can damage your ears and risk of hearing loss.
9. Bluetooth wireless technology operates within a range of about 10 m (30 feet). The maximum communication distance may vary depending on the p
10. presence of obstacles (people, metal objects, walls, etc.) or the electromagnetic environment.
11. Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices.
12. The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire or electric shock. If water or a foreign object enters the unit, stop use immediately.

Charge It

• On the right earcup, carefully plug the Type-C cable into the Type-C charging port. and connect the other end of the cable to either a computer USB port or a USB-compatible car or wall charger.
• A solid red LED light will appear to indicate when the headphone is charging.
• When charging is complete, the LED light will turn Blue.
• Charging time is approximately 2 hours.

Turn It On/Off

• Press & hold the power button on the right side of the headphones for about 3 seconds until the LED indicator light turns on.
• Press & hold the power button again for 4 seconds until the LED light turns off.

Pair & Connect With New Device

• Power on the wireless bluetooth headphone(refer to the “Turn It On” section).
• To pair the headphones with a new device, the Red and blue LED light blink to indicate it is ready to be paired with your device.
• On your Bluetooth-enabled smartphone, tablet, or media player, navigate to the Bluetooth settings menu, turn on the Bluetooth feature, and search for new devices After a few seconds you will see “DENVER BTH-235B” listed.
• Tap this model to select it. A solid blue LED light indicates your device has successfully paired.
• With your previously paired device’s Bluetooth turned on and in range, The headphones will automatically reconnect to the last Bluetooth device it was connected to

NOTE: If the headphone is not used within 5 minutes. the headphones will automatically turn off to save battery.

Play

• Connect your device to the headphones via Bluetooth(refer to the” Pair & Connect” section)
• Open your favorite music app and press play.
• Control the music, track & volume from your device, or control the music & volume.
• Press the Power button once to play/pause music & answer calls, press it twice to redial the last number called on your phone, and press & hold it to reject an incoming call.
• All audio, including music, games, videos, and notifications will be routed through the headphones.

Function

• Press + area(refer to product Diagram) to the next track.
• Press – area(refer to product Diagram) to the previous track.
• Press & Hold + area(refer to product Diagram) to turn up the volume.
• Press & Hold – area(refer to product Diagram) to turn down the volume.

Troubleshooting

No power

• Recharge your wireless bluetooth headphone using the Type-C cable.
• Music is not playing over Bluetooth
• Make sure your Bluetooth device has an A2DP profile. Check if both devices are paired and connected over Bluetooth.
• Restart the headphones to reconnect your Bluetooth device.
• Bluetooth device will not reconnect with the headphone
• Navigate to your Bluetooth settings menu on your Bluetooth device, tap “DENVER BTH-235B”, and select “Forget”.
• Now follow the steps to pair your device again. Or, press & hold the power button on the headphones (while powered on) to disconnect the headphones from any connected devices.
• Then follow the steps to reconnect your device.
• For safety reasons, please do not charge the headphones while using them.

Product Diagram

Warning!

• Lithium battery inside!
• Do not try to open the product!
• Do not be exposed to heat, water, moisture, or direct sunlight!
• Only charge with the original cable supplied with this product

Please notice that products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S Electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to your health and the environment if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries are marked with the crossed- out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user, it is important that you submit your used batteries to the appropriate and designated facility. In this manner, you make sure that the batteries are recycled in accordance with the legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites or be collected from households. Additional information is available at the technical department of your cit

Hereby, DENVER A/S declares that the radio equipment type BTH-235B is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.denver.eu and then click the search ICON on the top line of the website. Write model number: BTH-235B Now enter the product page, and the red directive is found under downloads/other downloads. Operating Frequency Range2402-2480MHz:
Max Output Power:0.5mW Warning Lithium battery inside.
DENVER A/S
Omega 5A, Soften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu

Contact Nordics
Headquarter
Denver A/S
Omega 5A, Soften
DK-8382 Hinnerup
Denmark
Phone: +45 86 22 51 00
(Push “2” for support)
E-Mail For technical questions, please write to: support@denver.eu
For all other questions please write to:denver@denver.eu

References

• Denver A/S
• Denver A/S

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>