HOME DECORATORS COLLECTION 1007516310 9 ft Elegant Grand Fir LED Pre-Lit Tree Instruction Manual
- June 13, 2024
- HOME DECORATORS COLLECTION
Table of Contents
HOME DECORATORS COLLECTION 1007516310 9 ft Elegant Grand Fir LED Pre-Lit
Tree
Product Information
- Product Name: 9 ft Elegant Grand Fir LED Pre-Lit Tree with Timer
- SKU: 1007516310
Safety Information
- When using electrical products, always follow basic precautions.
- Read and follow all safety instructions.
- Save these instructions for future reference.
- Disconnect the product from its power source before assembling or disassembling.
- Caution: The product consists of non-replaceable LED lamps. Do not attempt to replace lamps or modify the string to reduce the risk of fire or electric shock.
- This product can only be used with the original adapter, not other brands of adapters.
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed
including the following:
- a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- b) This product is for indoor use only. The electrical rating 0.64 A 120 V 60 Hz.
- c) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- d) This seasonal use product is not intended for permanent installation or use.
- e) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
- f) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- g) Do not let lamps rest on the supply cord or on any wire.
- h) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
- i) This is an electric product – not a toy! To avoid risk of fire, burns personal injury and electric shock it should not be played with or placed where small children can reach it.
- j) Do not use this product for other than its intended use.
- k) Do not hang ornaments or other objects from cord, wire, or light string.
- l) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- m) Do not cover the product with cloth, paper or any material not part of the product when in use.
- n) Do not move the tree by pulling the tree tips or tree branches.
- o) Read and follow all instructions that are on the product or provided with the product.
- p) SAVE THESE INSTRUCTIONS.
CAUTION! – ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE BEFORE ASSEMBLING OR DISASSEMBLING.
CAUTION:
- The product consists of non-replaceable LED lamps. To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string.
- This product can only be used with the original adapter, not other brands of adapter.
Pre-Assembly
Package Contents
Assembling the tree stand
- Step 1. Choose a location near a wall outlet.
- Step 2. Open the stand to a 90 degree angle until the hole lines up with the hole on the tube.
- Step 3. Screw an eye bolt into the hole.
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
-
Step 1. Insert tree bottom (D) into the tree stand and tighten the screw. (See Fig. 1)
-
Step 2. Insert lower middle section (C) into the tree bottom (D). (See Fig. 2)
-
Step 3 Insert upper middle section (B) into the lower middle section (C). (See Fig. 3)
-
Step 4. Insert tree top (A) into the upper middle section (B). (See Fig. 4)
-
Step 5. Allow branches to fall into place or gently pull branches up and out.
When adjusting branches be sure that all wires are free of branch hinges. (See Fig. 5) -
Step 6. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and one at the center of the main stem. Repeat pattern for each branch. (See Fig. 6)
-
Step 7. Plug the power cord into a proper outlet. This tree comes with a control box and a remote control. You can change the lighting patterns of the tree by using control box or remote control. Please see Instructions of control box and remote control as below.
Operation
Turning on the tree
Step 1. Connect each tree section well and plug the power cord into a wall
outlet.
Instruction of control box and remote control
Instruction of control box
-
Press the button on the control box to turn on and off the lights or timer function.
-
Press and hold the button on the control box to activate timer mode, select below timer hours:
-
The first indicator lights of the timer on the control box turn on:
The tree lights will automatically run through a 2-hours
ON, 22-hours OFF cycle. -
The second indicator lights of the timer on the control box turn on: The tree lights will automatically run through a 4-hour ON, 20-hour OFF cycle.
-
The third indicator lights of the timer on the control box turn on:
The tree lights will automatically run through a 6-hour
ON, 18-hours OFF cycle. -
The fourth indicator lights of the timer on the control box turn on:
The tree lights will automatically run through an 8-hour ON, 16-hour OFF cycle.
To turn off the timer function, press the button on the control box or press
the off button on the remote control.
There is a memory mode on timer control even unplug and re-plug back on.
Instruction on remote control
- Please note this tree has a remote control.
- Please pull out the insulation tape from the remote control, before starting to use it.
- Press the button ON or OFF to turn on or off the lights or timer function.
- Press the 2H, 4H, 6H, or 8H button to select the different timer hours.
If the remote control does not work, check whether the battery of the remote control is out of power.
To replace the remote control battery:
- Replace with a new button cell “CR2025” (3 volts) into the compartment.
CAUTION: DO NOT DISPOSE OF\ BATTERIES IN A FIRE. BATTERIES MAY EXPLODE OR LEAK.
Use and Care Instructions
- a) Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.|
- b) When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
- c) When not in use, store neatly in a cool, dry location protected from sunlight.
Care and Cleaning
- Step 1. Remove all ornaments and decorations.
- Step 2. Unplug the power cord from the wall outlet.
- Step 3. Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole.
- Step 4. Repeat this step for the center and bottom tree sections.
- Step 5. Carefully place all tree sections into a shipping box and tape it shut. Step 6. Store your tree in a cool, dry place away from sunlight.
Troubleshooting
FCC STATEMENTS
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Please note that changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
- a) To reduce the risk of electric shock, use only with the power-supply cord provided or with a cord set intended for indoor use.
- b ) Do not use a cracked, frayed, or damaged cord. Inspect the cord periodically.
- c) Do not abuse the cord – Do not carry the product by the cord or yank or pull it to disconnect from the outlet.
- d) Disconnect the product from the outlet when not in use.
WARRANTY
3-year Limited Warranty
This product carries a three (3) year warranty against defects in workmanship
and materials for the repair or replacement of products from the date of
purchase. This product is not guaranteed against wear or breakage due to
misuse, abuse, accident, negligence or normal wear and does not apply to floor
models or display trees. This Limited Warranty only applies to the original
purchaser, and only applies with proof of purchase. Please keep your original
store sales receipt, as NO WARRANTY CLAIMS WILL BE CONSIDERED WITHOUT ORIGINAL
PROOF OF PURCHASE. Repair/Replacement as provided by this warranty is the
exclusive remedy of the consumer and does not place the manufacturer liable
for any incidental or consequential damages.
- Date Code: 04012023_2008499
- Importer: The Home Depot
- Address: 2455 PACES FERRY ROAD ATLANTA, GA 30339 Tel: 1-800-986-3460
Adapter Model No. TS-36W12V
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>