HOME DECORATORS COLLECTION IZC1691L-2/AL Rodham LED Exterior Wall Lantern User Guide
- October 30, 2023
- HOME DECORATORS COLLECTION
Table of Contents
Item # 1008 468
831
Model # IZC1691L-2/AL
USE AND CARE GUIDE
RODHAM LED EXTERIOR WALL LANTERN
Questions, problems,
missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators
Collection through the purchase of this wall lantern. We strive to continually
create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank
you for choosing Home Decorators Collection!
Safety Information
WARNING: Carefully read and understand the information in this manual
before beginning assembly and installation. Failure to do so could lead to
electric shock, fire or other injuries which could be hazardous or even fatal.
WARNING: Be sure the electricity to the wires you are working on is shut
off. Either remove the fuse or turn the circuit off.
NOTICE: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTICE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warranty
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of five (5) years from date of
purchase. This warranty applies only to the original consumer and only to
products used in normal use and service. If this product is found to be
defective, the manufacturer’s only obligation, and your exclusive remedy, is
the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been
improperly installed, set-up, or used in any way not in accordance with the
instructions supplied with the product. This warranty shall not apply to a
failure of the product as a result of an accident, misuse, abuse, negligence,
alteration, or faulty installation, or any other failure not relating to
faulty material or workmanship. This warranty shall not apply to the finish on
any portion of the product, such as surface and/or weathering, as this is
considered normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty,
whether express or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor / expense costs involved in the
replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit
www.HomeDepot.com/HomeDecorators.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly. Before starting installation of this
fixture or removal of a previous fixture, disconnect the power by turning off
the circuit breaker or by removing the fuse from the fuse box. To avoid
damaging this product, assemble it on a soft, non-abrasive surface such as
carpet or cardboard.
NOTE: Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part | Description | Quantity |
---|---|---|
AA | Wire Connector | 3 |
BB | Mounting Plate | 1 |
CC | Ground Screw | 1 |
DD | Outlet Box Screw (15 mm) | 2 |
EE | Mounting Screw (20 mm) | 2 |
PACKAGE CONTENTS
Part | Description | Quantity |
---|---|---|
A | Wall Plate | 1 |
B | Washer | 2 |
C | Lock Nut | 2 |
Attaching the mounting plate to the outlet box
□ Screw the mounting screws (EE) into the mounting plate (BB).
□ Mount the mounting plate (BB) to the outlet box(not included) using the two
outlet box screws (DD).
□ Make sure the threads of the mounting screws(EE) are facing out when the
mounting plate (BB is attached to the outlet box.
Connecting the electrical wires
□ Wrap the middle of the ground wire from the fixture around the ground
screw (CC) on the mounting plate (BB). Use a wire connector (AA) to connect
the end of the ground wire from the fixture to the ground wire from the outlet
box.
□ Use a wire connector (AA) to connect the white wire from the fixture to the
white wire (neutral wire) from the outlet box.
□ Use a wire connector (AA) to connect the black wire from the fixture to the
black wire (live wire) from the outlet box.
□ Wrap the three wire connections with electrical tape for a more secure
connection.
□ Position the wires back inside the outlet box
Securing the fixture to the wall
□ Align the mounting screws (EE) to protrude through the holes on the wall
plate (A).
□ Place a washer (B) onto each of the mounting screws (EE).
□ Secure the fixture to the wall by screwing the lock nuts (C) onto the
protruding mounting screws (EE).
Applying caulk
□ Once the fixture is mounted on the wall, caulk the space between the wall
and the upper 3/4 area of the wall plate (A) to prevent water seeping into the
wall.
□ Leave the bottom 1/4 area uncaulked for drainage of any water which might
leak into the enclosure.
Care and Cleaning
□ Clean the fixture with a soft, dry cloth.
□ Do not use any cleaners with chemicals, solvents or hash abrasives.
WARNING: Before attempting to clean the fixture, disconnect the power to
the fixture by turning the breaker off or removing the fuse from the fuse box.
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
The bulb will not light. | The power is off. | Ensure the power supply is On. |
The circuit breaker is off. | Ensure the circuit breaker is in the On position. | |
The fuse blows or circuit breaker trips when the light is turned on. | Crossed | |
wires or power wire is grounding out. | Check the wire connections. |
Contact a qualified electrician or call the
Customer Service Team at 1-800-986-3460.
Questions,
problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
Documents / Resources
| HOME
DECORATORS COLLECTION IZC1691L-2/AL Rodham LED Exterior Wall
Lantern
[pdf] User Guide
IZC1691L-2-AL, IZC1691L-2 AL, 1008 468 831, Rodham LED Exterior Wall Lantern,
IZC1691L-2 AL Rodham LED Exterior Wall Lantern, LED Exterior Wall Lantern,
Exterior Wall Lantern, Wall Lantern, Lantern
---|---
References
- Home Decorators Collection - Home Decor - The Home Depot
- Home Decorators Collection - Home Decor - The Home Depot
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>