HOME DECORATORS COLLECTION SPND-06005-DEL Mauvo Canyon Led Outdoor Small Pendant User Guide
- October 30, 2023
- HOME DECORATORS COLLECTION
Table of Contents
SPND-06005-DEL Mauve Canyon Led Outdoor Small Pendant
User Guide
Item #1007198079
Model #SPND-06005-DEL
USE AND CARE GUIDE
MAUVO CANYON LED OUTDOOR SMALL PENDANT
SPND-06005-DEL Mauve Canyon Led Outdoor Small Pendant
THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators
Collection through the purchase of this light fixture. We strive to
continually create quality products designed to enhance your home. Visit us
online to see our full line of products available for your home improvement
needs. Thank you for choosing Home Decorators Collection!
Safety Information
-
Consult a qualified electrician if you have any electrical questions.
-
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver. -
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Responsible Party Name: Bel Air Lighting
Address: 28104 Witherspoon Pkwy. Valencia, CA 91355
Telephone Number: 1-800-446-9092
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attempt installation. Please call our Customer Service Team at
1-800-986-3460.
WARNING: Before starting installation of this fixture or removal of a
previous fixture, disconnect the power by turning off the circuit breaker or
by removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of five (5) years from date of
purchase. This warranty applies only to the original consumer purchaser and
only to products used in normal use and service. If this product is found to
be defective, the manufacturer’s only obligation, and your exclusive remedy,
is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect, or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set-up, or used in any way not in accordance with the instructions
supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration,
faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear. The manufacturer does not warrant and specially disclaims any
warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically
disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense
costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit
www.homedepot.com/homedecorators.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part | Description | quantity |
---|---|---|
AA | Mounting bracket | 1 |
BB | Mounting screw | 2 |
CC | Wire nut | 3 |
PACKAGE CONTENTS
Part | Description | Quantity |
---|---|---|
A | Light fixture | 1 |
B | Chain (w/ quick connector) | 1 |
C | Canopy | 1 |
Installation
-
Secure the light fixture
• Attach the mounting unit (AA) to the junction box (not included) with the mounting screws (BB) and remove the pre-installed screw collar ring.
• Place the canopy (C) over the pre-installed screw collar loop on the mounting unit (AA). Turn the screw collar ring until 1/2 of the screw collar loop threads are exposed.
• Secure the chain (B) to the screw collar loop on the mounting unit (AA) and the top loop of the light fixture (A). Lower the screw collar ring and canopy (C) over the chain (B).
• Weave the electrical wires, ground wires through the chain (B),canopy (C) and the center of the mounting unit (AA).
NOTE: Ensure the quick connector is fully closed when installing the chain. -
Making the electrical connections
• Connect the copper wire from the light fixture (A) to the mounting unit (AA) by securing it with the preinstalled ground screw.
• Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire nuts (CC) and secure with electrical tape (not included).
NOTE: If the wires from the fixture are the same color, attach the smooth wire with H markings or letters to the black (positive) wire and the ribbed wire with N markings to the white (neutral) wire. -
Securing the light fixture
❑ Place the canopy (C) over the pre-installed screw collar loop on the mounting unit (AA). Screw on the screw collar ring CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly during installation and use silicone sealant around the canopy for better sealing after installation.
Operation
Secure the light fixture
- Turn the light switch on to activate the fixture.
- If it is daylight, the fixture will not illuminate. To test the fixture, cover the photocell with electrical tape. Once you confirm the fixture illuminates, remove the electrical tape.
- If it is daylight, the fixture may not illuminate with the electrical tape over the photocell, as the photocell can be sensitive. Wait until nighttime to confirm the fixture illuminates.
NOTE: Position the photocell fixture so that the light from the any other fixture or any other light does not shine directly onto the “eye,” as this will interfere with the normal operation of the photocell fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem | Possible Cause | Possible Cause |
---|---|---|
The bulb will not light | The power is oft | Ensure the power supply is On. |
There is a faulty wire connection. | Check the wiring. | |
The circuit breaker is off. | Ensure the circuit breaker is in the ON position. | |
The fuse blows or circuit breaker trips when the light is turned on. | There | |
are crossed wires or the power wire is grounding out. | Check the wire |
connections. Contact a qualified electrician or call the Customer Service Team at 1-800-986-3460.
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. — 7 p.m., EST, Monday — Friday, 9 a.m. — 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
References
- Home Decorators Collection - Home Decor - The Home Depot
- Home Decorators Collection - Home Decor - The Home Depot
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>