Gelius GP-L8P Amazwatch GT 2021 Smart Watch User Manual
- June 13, 2024
- Gelius
Table of Contents
Gelius GP-L8P Amazwatch GT 2021 Smart Watch User Manual
Welcome to use our high-performance wristband smart bracelet which creates thoughtful and health experience for you. Device maintenance
Please remember the following tips when you maintain your smart bracelet:
- Clean the smart bracelet regularly. especially its inner side, and keep it dry.
- Adjust the smart bracelet tightness to ensure air circulation.
- Excessive skincare product should not be used for the wrist wearing the smart bracelet.
- Please cease wearing the smart bracelet in case of skin allergy or any discomfort.
Schematic diagram of main body of the smart bracelet
Power-on
Long press the side button for 3 seconds or plug in the charging clamp to charge the smart bracelet.
Downloading and binding of smart bracelet App
- Download and install App
- Scan QR Code with mobile phone to download App.
- For 1OS system, select APP, storesearch Da Fit.
Android system, select Google Play to download and install Da Fit. Or scan OR code to download
Note: your mobile phone must support Android 5.1 or 1OS 8.0 or above, and Bluetooth 4.0 or above.
http://plus.crrepa.com/app-download/dafit
2. Bind smart bracelet with APP
- Click on ‘Add Device’ to bind the smart bracelet.
- Click on GP-L8P device in the device list scanned.
- The 10S system will show a Bluetooth pairing request and you can click on Bluetooth “Pairing· to confirm. Connect it directly to Android system.
- Successfully bound.
Introduction of smart bracelet functions
Power-on status
switch the menu interfaces of main screen. as the interfaces shown in the
following;
Remove Device
For the Android mobile phone. the device can be disconnected from your mobile
phone by simply clicking on Remove device.
For Apple mobile phone after binding removal. you need to click on the symbol
on the right in Setting- Bluetooth.
and choose to ignore the device. As shown below:
Frequently Asked Questions (FAQs)
1. Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
11 Lock background APP. When the Da Fit process is cleared, the smart bracelet will be disconnected from the mobile phone. 2) Set APP self-startup 3) Unrestricted background operation. The Android mobile phone installed with APP intelligently restricts the background operation by default, and App should be set manually without any restriction.
2. Why cannot the smart bracelet receive message push?
3. Why can't take a hot bath with the smart bracelet?
Answer: the bath water has a relatively high temperature, and generates a lot of vapor which is in the gas phase with small molecular radius and can easily infiltrate into the smart bracelet from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet. Note: for more FAQs, please refer to Da Fit APP feedback.
http://plus.crrepa.com/app-download/dafit
Specifications:
Display: 1.4 TFT 240 * 240
Processor. NRF52832 OFAA
Memory: RAM 64KB ROM 32Mb
Connection type: Bluetooth 4.2
G-Sensor: Bosch 421
Sensor Heart Rate: HRS3300
Degree of protection: IPX7
Battery: 170 mAh
Working Time: 7 days
Standby time: 21 days
Charger type: Magnetic USB cable withholder
Main parameters
Our company reserves the right to change and improve any of the features
described in this manual without prior notice.
At the same time, the company reserves the right to constantly update the
content of the products.
SPECIAL ATTENTION:
For other questions about using the watch, you can get detailed answers on the
company’s website or contact the contacts listed in the warranty card.
Products, accessories, user interface, and other illustrations in this manual
are schematic and are for reference only. Due to product updates, the actual
product and picture may be slightly different.
– Please consult a doctor before engaging in a new or any sport.
– The device is not a certified medical device, the measurement results of
this product are for reference only and are not used for any medical
indications
– After connecting the charger, connect the USB cable (you can use a computer
port or mobile power supply or charging adapter), the desired input voltage
should not exceed SV lA
– Do not subject the device to strong shocks
– Please avoid direct sunlight or heaters.
– Do not disassemble or repair the device yourself.
– It is important to hand over packaging, batteries, batteries, accessories
and other electronic products to specialized companies, or collect them in a
special container in a designated place that is responsible for
environmentally friendly methods of storage, treatment, disposal or disposal
of hazardous waste.
– It is not recommended to wear and use the device when taking a bath, shower,
swimming pool, open water. salt water.
– To feel comfortable in Genius Watch, wear them not too tight, but not too
weak, leaving room for the skin to breathe.
– Keep your Gelius Watch and straps, as well as your skin, dry and clean to
ensure maximum comfort and prevent premature wear of the watch’s components.
This is especially important after exercise and exposure to liquids such as
sweat. soap, sunscreen and cosmetics, antiseptics and other products that can
irritate the skin.
– Choose the appropriate model of Gelius Watch and strap. If you have an
allergy or sensitivity to substances such as metals, silicone or plastics,
consult a dermatologist or cosmetologist.
– In addition to a possible allergic reaction, too tight tightening of the
bracelet can cause irritation, and too loose – rub. Do not forget about the
hygiene of the watch and straps, and human skin.
Explanation!
– For most problems with the operation and connection of the smartwatch, the
easiest way is to restart the system. Therefore, in case of problems with the
smart watch and smartphone, you need to restart both devices.
– Device charge level. One of the most common causes of device sync failures
is a low battery level in one of the paired devices. For a successful process
of connecting a smart watch to a phone, the recommended battery level of both
devices is at least 80%.
– Bluetooth. Before you start connecting, make sure that Bluetooth is turned
on on each device. Sometimes you may need to reconnect (turn off and on again)
Bluetooth on your smart. phone and smart. watch.
– Sometimes, for Bluetooth to work properly, you need to update the list of
devices, for which you need to select “Forget devices· in the bluetooth
settings menu and search again.
– Smart watch settings. Improper device configuration is a common cause of
device connection difficulties. Resetting the smartwatch to factory settings
can help eliminate such problems.
– OS version. Outdated OS can also cause the clock to be out of sync with the
phone. If you have a new operating system, you need to install it on a smart
watch (having previously removed the current old version from the device).
After downloading new software, you need to re-sync your devices.
– Disconnection due to phone settings Some phone models often use a power
consumption mode that optimizes power consumption. Inactive programs go to
sleepier become inactive. This may affect the background of the program. You
can change the script in the smartphone settings. Remove restrictions or add
an application to the list of exceptions.
– Bluetooth connectivity may be lost frequently if there are foreign objects
(such as walls or other active Bluetooth devices) between the device carrier
and the phone, if the media and phone are in a Wi-Fi environment, in an
environment where the a large number of routers, or near the microwave oven.
– Phones from different manufacturers can be equipped with power-limiting
mechanisms that prevent the application from running in the background or
searching for available Bluetooth devices for reconnection.
Explanation!
– All devices that are tested for moisture penetration and dust exposure are
assigned a degree of protection. It consists of the abbreviation IP and two
characters after it. The first digit of the two (IPXX) determines the degree
of protection against the penetration of solid particles. The second digit in
the degree of protection (IPXX) means the level of protection against water.
In some cases, one of the numbers can be replaced by X. If the protection
class IPX7 is specified, it will withstand the ingress of water jets. and it
did not pass the test for protection against dust.
IP65
Protection against general penetration of dust
Protection against low pressure water jets from any direction
IP67
Protection against general penetration of dust
Protection against immersion to a depth of 1 m
IP68
Protection against general penetration of dust
Protection against immersion to a depth of 1.5 m
Testing of all devices is performed in fresh cold water with a temperature of 15 ° C to 35 ° C. Contact with hot or salty sea water can
damage the device. Do not press keys underwater. In a wet protective watch,
they are protected by cuffs. but the risk of water getting inside remains. You
must refrain from using the physical buttons of the device while it is in the
water.
Otherwise, water may enter the cabinet and damage the device electronics. Make
sure the gadget is completely dry before charging.
Explanation!
– To save battery power for a long time, you need to optimize the performance
of the smartwatch, reduce consumption and extend the life of the product:
– When buying a smart watch, charge the product to 100%
– The first few times (3-5) it is recommended to charge the device up to 100%
– Do not use devices that are not designed for your smartwatch model to charge
– Get rid of all programs and features that you do not use
– Minimize the screen brightness and turn off the screen activation function
by raising your hand
– Set up to receive only the most important messages and reminders
– Use additional functions {physical data measurement. call mode, constant
screen time) only if necessary and do not forget to turn them off When
actually used, battery life depends on various factors, such as settings,
operations, and operating conditions, so it may differ from laboratory data.
– This product is not a medical device. All measurement data and results are
provided for reference only and may not be used for the professional diagnosis
or monitoring of any medical condition. External factors (such as hair on the
hands, tattoos or dark skin) can lead to inaccurate results or inability to
perform measurements.
– To measure heart rate, Sp02, blood pressure, keep your hand still. The
accuracy and sensitivity of the workout recognition function varies from one
person to another and depends on the position of the user during the workout
and how skilfully he trains. With a short workout or frequent changes in
posture, the automatic recognition function may not work. When you’re driving,
riding a bus, or doing something like this, recognition may work by accident
if your actions are very similar to your chosen training mode. If you exercise
outdoors and the GPS signal is low power or the AGPS data has not been
synchronized with your mobile phone for a long time, your activities can be
considered as happening indoors.
All data provided by in-house laboratories or suppliers and obtained under
certain test conditions. Actual use may vary slightly depending on the
individual features of the product, software version, operating conditions.
and environmental factors, so actual data should be considered the end option.
To provide the most accurate information about the product its specifications
and characteristics, our company may at anytime change and adjust the text
descriptions. images and other content on the above pages according to the
actual product characteristics, specifications, indexes. details and other
information. Because changes in product batches, production factors, and
supply factors occur in real time, we do not provide separate notifications in
the event of changes and the necessary adjustments described above.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>