NEMO 072TTB000600 Tubes Plafond LED Instruction Manual
- June 13, 2024
- NEMO
Table of Contents
NEMO 072TTB000600 Tubes Plafond LED
Product Information
Product Name: Tubes 2 Wall LED
Product Code: 072TTB000600
Date: 15/05/2023
Designer: Charles Kalpakian
Product Usage Instructions
- Make sure to use a countersunk screw with a head’s diameter of 20mm.
- The maximum screw diameter should be 7mm.
- Pay attention to the tightening force. Refer to figure 6 for details.
- After screwing, ensure that the moving part rotates smoothly.
- If necessary, slightly unscrew the screws.
- Place the connectors in their designated positions and move the cables back into the wall.
- Refer to the list of compatible dimmers available on our website www.nemolighting.com.
- Always include a switch in the dimmer connection to ensure the lamp can reach the OFF state.
- Before performing any maintenance or intervention, disconnect the power supply.
- This product is suitable for indoor use only.
- Use only light bulbs of the type and power indicated in the label data.
- For installation, it is recommended to hire a qualified electrician.
- Anodized finishes may have variations in color due to the galvanic finishing process. These variations should be considered as aesthetic elements of the product.
- The brushing process for polishing is done manually, so color variations are inherent to the manual polishing process.
- Products made through extrusion deformation processes may have slight dimensional variations.
- As artisanal products, they may have variable thicknesses, colors, and finishes.
- Avoid exposing the product to environments with chlorine, saltwater, or other aggressive agents.
- The color temperature (CCT) of LED sources may vary from the nominal value.
- The manufacturer reserves the right to make technical or formal changes without prior notice, especially concerning LED sources.
- These instructions should be carefully preserved for future reference.
Box contents
Installation
CAUTION
-
Symbols and guarantee of the fixture are described in the enclosed sheet. / Disconnect power before proceeding with the installation of the fixture. / In the absence of the IP symbol, fixture is only for indoor installation. / Use only bulbs of suitable type and power specified in the label. / Safety is guaranteed only if installation is carried out by a qualified electrician. / Products with anodized finishes could show different color shades due to the industrial galvanic process. Shades have to be considered as aesthetic elements of the product. / Polishing process is hand-made. Shades are therefore due to this manual process. / Dimensions of products made with deformations of extrusions could be subject to changes of ±1cm. / As blown glass is produced by traditional craft techniques, its thickness, color and finish are subject to variations, a feature that makes each piece unique. / Do not install fixture in ambiences with presence of chlorine, salt air or aggressive agents, if not expressly mentioned. / The color temperature (CCT) of LED sources can be different from the declared nominal value between a range of ±5%. / NEMO reserves the right to make any technical or formal alterations to its products without giving prior notice, especially for LED sources. / We recommend you to keep instructions for further consultations. /
-
This lamp has been manufactured in conformity with EU Directive 2002/96/EC. The crossed-out wheelie bin symbol marked on the appliance means that it was put on the market after 13th August 2005 and that it must therefore be disposed of separately from household waste. Separate disposal of this product prevents any negative effects to public health and the environment deriving from unsuitable disposal and allows the materials it is made of to be recovered to achieve considerable savings of power and resources. The end user is responsible for delivering the appliance, at the end of its working life, to a suitable collection facility. Failure to do so will be punished according to the current national legislation. For detailed information on collection systems and methods, please contact the relative office in your town, the local waste disposal service or the shop where you purchased the product.
LED, 8W, 380lm, 2700K , 220-240V, 50-60Hz dimmable TRIAC
This product contains a light source of energy class ”E”
INSTRUCTIONS FOR LAMP CLEANING
To clean the lamp, use only a soft cloth, moistened with soap and water, if
necessary.
Viale Brianza, 30 – 20823 Lentate sul Seveso (MB) ITALY
Tel: +39 0362 166 05 00
Fax: +39 0362 372 996
info@nemolighting.com
nemolighting.com
Copyright © 2018 NEMO Srl Milano, Italia.
The text and images are protected by copyright. Unauthorized reproduction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>