myFirst Voice 2 Portable Microphone and Wireless Speaker User Guide
- June 13, 2024
- myFirst
Table of Contents
myFirst Voice 2 Portable Microphone and Wireless Speaker
Product Information
The first Voice 2 is a portable speaker with a built-in microphone. It features a 52mm/4 speaker with an output power of 8W. The transmission frequency is 2.4GHz, and it has a connection distance of up to 10 meters. The speaker has a battery capacity of 1200mAh, providing a maximum volume working time of 110 minutes. It can be charged via Type-C charging with a 1A (DC 5V) input. The speaker also has a 3.5mm AUX audio jack for wired connections(audio cable not included). The built-in microphone is a condenser microphone with a battery capacity of 500mAh. It has a maximum volume working time of 6 hours and can be charged via Type-C charging with a 1A (DC 5V) input. The microphone has a receiving sensitivity of -85dBm and a signal-to-noise ratio of 80dB. Its frequency range is 50-20kHz.
Product Usage Instructions
- Power On/Off: Press and hold the power button for 3 seconds.
- Switch between Wireless Mode and Memory Card Mode: Double-click the power button.
- Cycle through Sound Effects: Single click the power button.
Specifications
Speaker
- Speaker model: Φ52mm/4Ω
- Speaker output: 8W
- Transmission frequency: 2.4GHz
- Battery capacity: 1200 mAh
- Maximum volume working time: 110 minutes
- Charging time: 90 minutes
- Type-C charging: 1A (DC 5V)
- Connection distance: 10 meters
- 3.5mm AUX audio jack (Audio cable not included)
Microphone
- Condenser microphone
- Battery capacity: 500 mAh
- Maximum volume working time: 6 hours
- Charging time: 75 minutes
- Type-C charging: 1A (DC 5V)
- Receiving sensitivity: -85dBm sensitivity
- Signal-to-noise ratio: 80dB
- Frequency range: 50-20kHz
Instructions
-
Press and hold 3 seconds
Power on/off -
Double click
Switch between wireless mode and memory card mode. -
Single click
Cycle through sound effects -
Echo effect
© 2023 myFirst Tech Asia Pte. Ltd.