Girmi ST01 Steam Iron User Manual

June 13, 2024
Girmi

Girmi ST01 Steam Iron

Product Information

Technical Specifications

  • Brand: Trevidea
  • Model: ST01
  • Technical Model: CEA-13-07

Languages

  • Italian (IT)
  • English (EN)
  • Portuguese (PT)
  • Spanish (ES)
  • German (DE)
  • French (FR)

Protection Classes

Steam iron is classified under the following protection classes:

Class Description
Class 1 Protection against electric shock. Do not expose to rain or

moisture.

Product Usage Instructions

Important Safety Instructions

  • Do not open the device as there are no user-operable controls or replaceable parts inside. For all service operations, contact an authorized service center.
  • If the device is permanently out of order and you decide not to repair it, render it unusable by cutting the power cord.
  • Do not expose the power cord to sharp objects or hot surfaces, and do not pull it to unplug the plug. Do not let it dangle from the work surface where a child could grab it. Do not use the product in case of damage to the power cord, or plug, or in case of short circuits; have the product repaired by an authorized service center.
  • Do not expose the product to atmospheric conditions in dry places. Do not handle or touch the product with wet hands or bare feet.
  • Children should not play with the product. Keep the product and power cord out of the reach of children under 8 years old.
  • In case of malfunction and/or poor operation, do not tamper with the device. Any repairs must be carried out by the manufacturer or its technical service or by a similarly qualified person to prevent any risks. Failure to comply may void the warranty terms.

Product Components

At the. Component
1 Ugello spray
two Sportello forum reempimento
3 Vapor Regulazione
4 Ugello spray
5 Pulsating spray
6 Challenge
7 Chain caught
8 Spia Piastra Temperature
9 water measuring
10 Temperature control knob
11 Serbatoio aqua
12 Piastre

Filling the Water Tank

  1. Set the steam regulation (3) to 0.
  2. Open the tank door (2) and lift the iron tip to ensure that water enters the hole without overflowing.
  3. Slowly pour water into the tank until it reaches the maximum level indicated by MAX on the tank (11).
  4. Close the tank door (2).

Selection of Fabric Type and Temperature

The table below provides guidance on temperature settings based on the international symbols on clothing labels or the type of fabric.

Label Fabric Type Thermostat Setting
Synthetic Silk – Wool Cotton – Linen

Steam Ironing

To use the steam function, press the water spray button (5) slowly for a dense spray or quickly for a vaporized spray. Make sure there is water in the tank. For delicate fibers, it is recommended to moisten the garment before using the spray. Avoid using the spray on silk and synthetic fibers to prevent stains.

WARNING
ELECTRIC SHOCK RISK DO NOT EXPOSE TO RAIN OR MOISTURE

  • This symbol warns the user that un-insulated dangerous voltage inside the system may cause an electrical shock. Do not open the case.
  • Class I Appliance symbol. This means the appliance must have the chassis connected to the electrical earth/ground by an earth conductor.
  • Caution: this symbol reminds the user to read carefully the important operations and maintenance instructions in this owner’s guide.

SAFETY INSTRUCTIONS

The following are important notes on the installation, use and maintenance; save this instruction manual for future reference; use the equipment only as specified in this guide; any other use is considered improper and dangerous; therefore, the manufacturer cannot be held responsible in the event of damages caused by improper, incorrect or unreasonable use.

Before use, ensure the equipment is undamaged; if in doubt, do not attempt to use it and contact the authorized service center; do not leave packing materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within the reach of children as they are potential sources of danger; always remember that they must be separately collected. Make sure that the rating information given on the technical label are compatible with those of the electricity grid; the installation must be performed according to the manufacturer’s instructions considering the maximum power of the appliance as shown on the label; an incorrect installation may cause damage to people, animals or things, for which the manufacturer cannot be considered responsible thereof.
If it is necessary to use adapters, multiple sockets or electrical extensions, use only those that comply with current safety standards; in any case do not exceed the power consumption limits indicated on the electrical adapter and/or extensions, as well as the maximum power is shown on multiple adaptor. Do not leave the unit plugged in; better to remove the plug from the mains when the device is not in use. Always disconnect from the power supply if you leave it unattended.
Cleaning operations should be carried out after unplugging the unit.
If the unit is out of order and you do not want to fix it, it must be made inoperable by cutting power cord.

  • Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.

  • Do not use the appliance in the event of damage to the power cord, plug, or in case of short circuits; to repair the product only address an authorized service center.

  • Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc..

  • Always store it in a dry place.

  • This appliance can be used by children of 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved; children shall not play with the appliance; cleaning and user maintenance shall not be made by children without supervision.

  • Children must not play with the appliance.

  • Keep the appliance and its cord out of reach of children less than 8 years.
    If the power cord is damaged, or in case of failure and/or malfunction do not tamper with the unit. The reparation must be done by the manufacturer or by a service center authorized by the manufacturer in order to prevent any risk. Failure to comply with the above may compromise the unit’s safety and invalidate the warranty.
    WARNING: This appliance includes a heating function. Surfaces, other than functional surfaces may develop high temperatures. Since temperatures are perceived differently by different people, this device should be used with CAUTION. Hold the appliance exclusively to grip surfaces intended to be touched.

  • This appliance is intended to be used in households and similar applications such as: staff kitchen areas in shops, offices and other working environments; by clients in hotels, motels, and other residential type environments; farm houses, bed and breakfast type environments.

  • The appliance is not intended to be operated by means of an external timer or a separate remote-control system.

  • Before every use, unroll the power cord.

  • Use original spare parts and accessories only.

  • Do not subject the product to strong impacts, serious damages may result.

  • Do not use near or under flammable materials (like curtains), heat, cold spots, and steam.

GENERAL INFORMATION

At first use, remove the protective film of the plate; due to the presence of protective oil and residues left over from the film, the plate could emit some smoke. After few uses, the smoke will disappear. When using the product for the first time, repeatedly use the steam (away from clothes) and try to use the iron on a worthless piece of cloth to remove any manufacturing residues that may stain or scratch the clothes. Do not use the ironing system as a heating unit. When not in use, the iron must be stored upright. Keep the power cord free from knots and tangles. Do not wrap the power cord around the iron.It is recommended not to use too frequently the button called “steam shock” (steam shot), because it decreases the temperature of the iron plate which may cause drips of water instead of steam. Always unplug the iron before you fill or empty the tank Do not fill the tank above the maximum capacity and do not introduce into the tank mixtures for removing stains, vinegar, descaling agents or chemicals in general. Always select the most suitable temperature according to the fabric to be ironed.
The iron must be used and rested on a stable surface. When placing the iron on its iron stand, make sure that the surface is stable. The iron should not be used if dropped, when there are visible signs of damage, or if it loses water during operations.
CAUTION: the iron plate gets very hot during use, be careful not to touch it, serious risk of burns. Do not put your face near the steam coming out the iron plate

MOD. ST01

  1. Spray nozzle
  2. Water fill opening
  3. Steam adjustment lever
  4. Spray button
  5. Handle
  6. Plug
  7. Soleplate temperature” indicator light
  8. Water measuring cup
  9. Soleplate Temperature Selector Dial:
  10. Water tank
  11. Solepla

FILLING THE TANK

The filling operation must be performed only when the plate has been cooled down and after having unplugged the unit from the electrical outlet. We recommend the use of demineralized water to prevent excessive fouling (not covered by warranty).

  1. Place the steam control knob (3) on “0”. Open the water tank lid (2).
  2. Raise the tip of the iron to avoid any leak of water during the operation.
  3. Enter the water up to the maximum level indicated with “MAX” on the tank (11).
  4. Close the lid (2).

TEMPERATURE SETTING

The following table provides a guideline on how to adjust the thermostat according to the international symbols printed on the clothing labels or according to the type of fabric.

  • It is recommended to iron clothes that require low temperatures first and then medium and high temperatures. This operation allows to save time since the ironing plate heats faster than it cools down.
  • When you do not know the composition, it is recommended to iron a non-visible part of the it, starting from the lowest temperature to find the most suitable temperature. Sometimes the clothing becomes shiny, in this case, you need to iron it on the inside not to ruin it. When ironing at maximum temperature (MAX), it is recommended to place a cloth between the ironing plate and the fabric.

Setting the temperature

  1. Place the iron vertically. Plug the device to the electrical outlet.
  2. Select the temperature regulator (10) according to the symbols shown on the previous page. The chosen symbol has to be aligned with the mark placed on the tank. The iron plate temperature control light shows that iron plate (8) is warming up. Wait until light turns off to start ironing.
    Caution: While ironing, the control light lights up periodically indicating that the temperature is constant. If you lower the thermostat, do not start ironing until the iron temperature control light turns off.

STEAM IRONING
Before using the steam check that the water contained in the tank is enough. Adjust steam power using the control knob (3). Place the steam control knob between minimum and maximum depending on the amount of steam required and temperature.

Caution: the iron provides continuous steam only if it is held in a horizontal position and if the plate is hot. It is possible to stop the continuous jet of steam by placing the iron vertically or placing the steam control (3) to “0”.To avoid the dripping of water, it is recommended to only use steam at high temperatures.

WATER SPRAY
Press the water spray button (5) slowly to have dense spray; press fast for vaporized spray.

Caution: make sure there is water in the tank. For delicate fibers it is advisable to moisten the article before using the spray. To prevent stains, do not use the spray over silk and synthetic fibers.

DRY IRONING
To perform dry ironing, move the steam regulator (3) in the “0” position. In this position, the steam emission is
disable, otherwise, the water spray option is still unable.

CLEANING

Before cleaning any part of the product, ensure that the unit is unplugged from the electrical outlet and
the ironing plate isn’t hot anymore. Do not immerse the unit in water.
Any leftovers on the ironing plate can be removed with a damp cloth or with non-abrasive detergents. Do
not scrape the ironing plate with iron sponge or metal objects.
The plastic parts can be cleaned with a damp cloth and neutral detergent and then wiped with a dry cloth.
BEFORE STORING

  • Unplug the system from the outlet.
  • Empty the water tank by turning the device upside down and shaking it gently.
  • Allow the plate to cool down completely.
  • Wrap the power cord in the back of the body.
  • Leave the electric iron vertically.

TECHNICAL FEATURES

  • Power supply: AC 230V~50 Hz. 1800W power
  • Water tank capacity: 150 ml

To find the nearest service center, please call the telephone number 0541 694246, fax number 0541 756430 or contact us at assistenzatecnica@trevidea.it asking for the service centers supervisor

  • www.girmi.it.
  • TREVIDEA S.R.L. – Strada Consolare Rimini – San Marino n. 62 – 47924 – RIMINI (RN) – ITALY

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals