anko Make Your Own Marble Art Jewellery Instructions
- June 13, 2024
- Anko
Table of Contents
Instructions
148mm x 210mm
Make Your Own Marble Art Jewellery
Place an old cloth or newspaper over your work surface.
It is recommended that you wear an art smock to protect your clothing from
paint splashes.
-
Choose 10 beads to marble first. Fill 1/3 cup (10mL) of white pouring paint into a plastic cup. Choose one marble dye colour and add a few drops into the centre of the white paint.
-
Insert a bamboo stick into the hole of one of the beads. Dip half of the bead into the paint and twirl around until the entire bead is covered in paint.
-
Stand the bead & bamboo stick in the cardboard drying rack to dry.
-
Repeat step 2 & 3 with the remaining nine beads.
-
Allow the beads to dry, then coat with clear varnish. Allow to dry. Rinse the brush with water.
-
Repeat for the remaining 20 beads. Then thread the cord through the beads & tassles to create your necklace, bracelet, key charm etc.
Note: Stirring the beads a lot will lessen the marble effect and mix the
colours together.
Plastic cups can be rinsed with water & recycled.