GFERRARi G90011 Cyclonic Vacuum Cleaner PULISCO User Manual

GFERRARi G90011 Cyclonic Vacuum Cleaner PULISCO

ATTENZIONE RISCHIO DI SCOSSE ELETTRICHE NON ESPORRE A PIOGGIA E UMIDITA’ WARNING ELECTRIC SHOCK RISK DO NOT EXPOSE TO RAIN OR MOISTURE

ATTENZIONE: NON APRITE L’APPARECCHIO. ALL’INTERNO NON VI SONO COMANDI MANIPOLABILI DALL’UTENTE NE’ PARTI DI RICAMBIO. PER TUTTE LE OPERAZIONI DI SERVIZIO RIVOLGERSI AD UN CENTRO DI ASSISTENZA AUTORIZZATO.
 This symbol warns the user that un-insulated dangerous voltage inside the system may cause an electrical shock. Do not open the case.
 Class II Appliance symbol. The double insulated electrical appliance is one which has been designed in such a way that it does not require a safety connection to electrical earth/ground.
 Caution: this symbol reminds the user to read carefully the important operations and maintenance instructions in this owner’s guide.

SAFETY INSTRUCTIONS

The following are important notes on the installation, use and maintenance; save this instruction manual for future reference; use the equipment only as specified in this guide; any other use is considered improper and dangerous; therefore, the manufacturer cannot be held responsible in the event of damages caused by improper, incorrect or unreasonable use.
Before use, ensure the equipment is undamaged; if in doubt, do not attempt to use it and contact the authorized service center; do not leave packing materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within the reach of children as they are potential sources of danger; always remember that they must be separately collected.
Make sure that the rating information given on the technical label are compatible with those of the electricity grid; the installation must be performed according to the manufacturer’s instructions considering the maximum power of the appliance as shown on the label; an incorrect installation may cause damage to people, animals or things, for which the manufacturer cannot be considered responsible thereof.
If it is necessary to use adapters, multiple sockets or electrical extensions, use only those that comply with current safety standards; in any case do not exceed the power consumption limits indicated on the electrical adapter and / or extensions, as well as the maximum power shown on multiple adaptor.
Do not leave the unit plugged; better to remove the plug from the mains when the device is not in use. Always disconnect from power supply if you leave it unattended. Cleaning operations should be carried out after unplugging the unit.

If the unit is out of order and you do not want to fix it, it must be made inoperable by cutting power cord.

• Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.
• Do not use the appliance in the event of damage to the power cord, plug, or in case of short circuits; to repair the product only address an authorized service center.
• Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc.. Always store it in a dry place.
• This appliance can be used by children of 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning use of the appliance in a safe way and understand hazards involved; children shall not play with the appliance; cleaning and user maintenance shall not be made by children without supervision.
• Children must not play with the appliance.
• Keep the appliance and its cord out of reach of children less than 8 years.

If the power cord is damaged, or in case of failure and / or malfunction do not tamper with the unit. The reparation must be done by manufacturer or by service center authorized by the manufacturer in order to prevent any risk. Failure to comply with the above may compromise the unit safety and invalidate the warranty.
This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; by clients in hotels, motels and other residential type environments; farm houses, bed and breakfast type environments. The appliance is not intended to be operated by means of an external timer or separate remote-control system. Before every use, unroll the power cord.
Use original spare parts and accessories only.
Do not subject the product to strong impacts, serious damages may result. Do not use near or under flammable materials (like curtains), heat, cold spots and steam.

GENERAL INFORMATION

CAUTION: Do not vacuum sharp objects, liquids, flammable, explosive or hazardous to health materials, acids, combustible objects such as cigarettes or firebrands.

If you need to change a filter, make sure that the reassembly is made properly and new filters are not wet or damp. In this case, wait for it to dry completely before assembling.
Do not expose the appliance to high temperatures and do not bring it closer to heat sources.
Never leave the appliance unattended while it is running.
Only use the button to turn on or off the vacuum cleaner. In case of overheating, if the unit produces smoke, smell or unusual noises, turn it off immediately and check that the pipe is free from obstacles. If the tube is free, contact the service center for fixing it.
To avoid serious damage, do not walk on the power cord. Disconnect the plug from the electrical outlet immediately after use. Additionally it is advisable to wind the power cord in order to ensure a better cleaning and to avoid any risk of damage.
Do not immerse the motor unit in water or other liquids, clean it with a damp cloth only.
Do not use the appliance if the dust bin is not installed.
Do not use the product without proper filtering system assembled: this may seriously damage the engine avoiding the warranty. Use only on dry surfaces.
Caution when using the device on the stairs.
CAUTION: while the unit is running, do not approach the air inlet to ears, eyes, etc., or to fragile items such as vases, tools, electronic machines.

DESCRIPTION G90011

1. Power button
2. Power cord rewind button
3. Suction nozzle
4. Dust bin
5. Handle
6. Resting hook
7. Air outlet filter
8. Flexible hose
9. Central pivot wheel
10. Hose handle
11. Air regulator
12. Telescopic tube
13. Brush
    A. Dust bin release button
    B. Dust bin cover lid
    C. Opening lid button
    D. Cyclone Pre-filter E. Filter

ASSEMBLING THE ACCESSORIES

• Insert the hose (8) in the suction nozzle (3), pushing it until blocking. The flexible hose terminates in the handle (10), a curved tube equipped with a hole for adjusting the air flow (11). With this controller you can reduce or increase the suction power.
• Fit the telescopic tube (12) to the handle (10). The tube can be extended pushing the black button present on the tube. Attach the floor brush (13) (normal or parquet) or the multi-function nozzle to the extension tube. The nozzle can be oriented horizontally or vertically depending on the type of the area you need to clean and it is equipped with a mini-brush. Pull out the power cord to the desired length and plug it to the main electrical outlet.

OPERATING CONTROLS

• Power on: press the power button (1) and the device is turned on/off.
• Cable rewind: after use, unplug the appliance from the electrical outlet and press the button (2) to rewind the power cord.

CAUTION: when rewinding the power cord, it is recommended to pick up the plug to avoid whiplash.

REMOVING THE CONTAINER

The dust bin (4) must be emptied when full of dust. In any case empty it frequently, in order to ensure good performance of the vacuum cleaner and to prevent any leak in the air flow power. To empty the bin, follow the instructions below:

• Press the dust bin release button (A) WITHOUT PUSHING THE LID (B) DOWN; extract the dust container from appliance, pulling it up.
• Bring the dust container (4) over a bin and pull the filter (E) to remove it. Eventually clean the filter as for paragraph “Filter mantainance”.
• To open the lid of container (B):
  • Press the button (C, Push) that is over the filter (E).
  • Pull the lid up.
• Turn the container (4) pside down and lightly beat it to bring down the last remnants.
• Close the lid and mount the filter as for below steps.
  • In the front part of lid (B) there are 2 pins. Make them match with the 2 joints present on the front side of container (4).
  • Keeping the pins in position, lower down the lid (B) and push it on container until it locks.
  • Take the filter (E) and turn up the plastic tongue present on it.
  • Mount the filter in its seat on the back of container, pushing with the tongue the safety pin that exits from the lid (if filter is not well mounted and the pin is not pressed, it will not be possible to mount the container to the housing).
• Insert the container (4) in its seat on the housing of appliance and push it down until it locks.

FILTER MAINTENANCE

DISASSEMBLING THE FILTER SYSTEM

Once extracted the dust container (4), as described in previous chapter and remove the filter (E) pulling it

• Clean the filter that is under the lid as described in the next paragraph.
  The air-outlet filter is placed in the rear of unit, under the resting hook (6). To remove it, follow the steps:

• Remove the grid by pulling the tab and remove the filter (7) inside.

• Clean the filter as shown in the next section.

• During installation make sure to properly assemble the filter and the grid.

CLEANING FILTERS

The filters can be cleaned in various ways. For a brief cleaning lightly beat them on a trash can.

For a more thorough cleaning using compressed air or rinse with warm water. In this case, DRY THEM THOROUGHLY

Caution: Do not use detergent to clean the filters, the cyclone or the container. The filters must be completely dry before being assembled again.

FLOOR BRUSH

The floor brush can be adjusted in two ways, depending on the type of floor to clean. The position are:
a) For carpets b) For floors

STORAGE Rewind the power cord by using the button (2) and place the floor brush into the proper resting hook (6) placed on the back of the unit.

MAINTENANCE AND CLEANING

MAINTENANCE

Normally this vacuum cleaner is not very noisy. But when the dust bin is full the noise emitted changes and the suction power decreases. To lengthen the life of the product, it is recommended to empty the dust bin frequently. Never let the level of dust to be higher than the “MAX” level.
Even the filters, as mentioned previously, should be cleaned periodically. These filters can also be damaged or depleted; in these cases they should be replaced with original new ones.
CLEANING – CAUTION: Before attempting any cleaning operation, ensure that the unit is turned off and the power plug is disconnected from the main electrical outlet.
Clean the body of the unit with a damp non-abrasive cloth, avoid using detergents or abrasive cleaners. The cloth should not be too wet, because if the water penetrates into the device, it can seriously damage the appliance. To clean the filters and the dust bag, please follow the previous instructions.

TECHNICAL FEATURES

• Power supply: AC 220-240V~50-60Hz~700W
• Power consumption 25.6 kWh/year
• Suction power 17-20 Kpa
• Cyclone system and 2 HEPA filters
• Power cord length: 4,8 m
• Power cord rewinding system
• Accessories: flexible hose, telescopic tube, floor brush, parquet brush, multi-function nozzle

SPARE FILTERS: ask to your reseller the spare filter set, model G3FERRARI G90012

WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT

 The product is made of non-biodegradable and potentially polluting substances if not properly disposed of; other parts can be recycled. It’s our duty to contribute to the ecological health of the environment following the correct procedures for disposal. The crossed out wheelie bin symbol indicates the product complies with the requirements of the new directives introduced to protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and must be properly disposed at the end of its lifetime. If you need further information, ask for the dedicated waste disposal areas at your place of residence. Who does not dispose of the product as specified in this section shall be liable according to the law.

Customer Support

To find the nearest service center, please call the telephone number 0541 694246, fax number 0541 756430 or contact us at assistenzatecnica@trevidea.it asking for the service centers supervisor.

Appliance is conform to the pertinent European regulation and is therefore marked with the CE mark.
www.g3ferrari.it TREVIDEA S.r.l
 Appliance is conform to the pertinent European regulation and is therefore marked with the CE mark.
TREVIDEA S.R.L. – Strada Consolare Rimini – San Marino n. 62 – 47924 – RIMINI
(RN) – ITALY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>